Video Lag After Install
Feb 10, 2009
I recently did a clean install of Vista64 Home premium. I spent some time installing all of my drivers, and making sure all of the windows updates were installed. Everything seems to be running fine, including Photoshop, which is the primary use of the computer. However since I loaded vista, all of my video lags very badly. The sound seems to work fine, but the video frame rate is down to nothing. I cannot play any games on it right now. COD4 will load, and I will hear sound, but I will not get any video. And even older games like Guild Wars wont play. The video on guild wars was very laggy, and sharded. I have 6gigs of ram, and dual 6800 video cards. I didn't have these problems when I was running xp, so I am thinking there is something I forgot to do, or didn't know to do.
View 4 Replies
ADVERTISEMENT
Aug 12, 2008
I wanted to remove my NVIDIA old drivers(175.19) and replace it with 177.79. Used DriverSweeper 1.5.5, and this lovely program caused me nothing but headaches. Anyways, after this I installed 177.79(I think I was supposed to reboot, yes?) Now I can't even install any video driver(except for what Vista did automatically, but they are not the newest ones). On top of this NVIDIA driver 177.79 tells me I am using a 32bit OS?? I can assure you I am using 64 bit. I have attached some screenshots.
View 6 Replies
View Related
Apr 1, 2008
Is it ok to install a new video driver without un-installing the old driver?
View 6 Replies
View Related
Feb 6, 2009
Some of my video games install. Some old and new ones will not install. I mean, I only get the allow, cancel window. It wont give me the option to install, I have gone into the settings, into dos. It wont do anything, the only action I get is the green tower light and some action in the dvd player, thats it.
View 6 Replies
View Related
Aug 27, 2008
I have an NVIDIA GeForce 9600M GT video card installed on my new HP Pavillion dv7 1034ca laptop. It came with Vista Home Premium. So the first thing I did was intall Vista Ultimate. When I did that, the resolution was reset to 800x600. I reinstalled all the drivers, including the one for the NVIDIA card. When I went to change the resolution, I noticed that the highest I could go was 1440x900. Which is ok but I remember being able to go to a higher resolution when I had Vista Home Premium installed. The reason why I remember is because my icons are a bit larger now than they were before. What's bad is that 1440x900 is the highest I can go. What happened to my higher resolution?
View 5 Replies
View Related
Jan 21, 2008
I am having issues with ntune. I want to OC my GPU and I cannot. When I install ntune I loose the abilities to tweak the video settings. As a matter of fact it seems like the software gets screwy and nothing shows when the window opens.
View 5 Replies
View Related
Mar 22, 2009
DVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
View 4 Replies
View Related
Apr 19, 2008
I have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
View 9 Replies
View Related
Jun 5, 2009
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
View 6 Replies
View Related
Jun 28, 2008
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
View 4 Replies
View Related
Mar 28, 2008
how to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
View 4 Replies
View Related
Jul 17, 2008
I am about to install Vista64 home premium on a new build with 8 megs of RAM. The disk is Vista64 SP1. I was wondering if it is still recommended to install Vista64 with only 1 stick of RAM first prior to installing all 8 megs? Or because the disk has SP1, is this no longer an issue?
View 9 Replies
View Related
May 25, 2008
I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies
View Related
Dec 6, 2009
I am helping a friend install windows updates on her Sony VAIO laptop with Vista Home Premium SP1 installed. Laptop had not been updated since January 2009. All updates completed fine with the exception of KB973565. When installed via automatic windows updates I get the following error...........
View 9 Replies
View Related
Jan 30, 2007
I'm assuming a clean install with an upgrade license will be identical to a clean install with a 'full' copy, except that at some point during the process, it will ask for my key for Windows XP? I just want to confirm this is the case before I go buy an upgrade copy. one last question to tack on here - if I have a desktop and a laptop computer will it let me install the same copy and license key of Vista on both? I know some MS products in the past have allowed you to install on more than one computer because they realize a lot of people have more than one computer but they only work with one at a given time.
View 6 Replies
View Related
Apr 25, 2008
I've tried numerous times to Install Vista Sp1, but without success. The install appers to go well, reaching 100% at stage 3, but then the screen reports the SP did not successfully install, and proceeds to roll back. On Checking the message in Windows Update, the install failed with error 80004005. I've raised the issue directly with MS, but the advice to install the SP in Safe mode has not helped. I've also trawled various forums and cannot find any reference to the specific error code.
I own a Sony Vaio VGN-FZ1. A number of forums seem to suggest it might be a hardware issue, and I have tried disabling / uninstalling various devices to
see if this helps, but this also has not got me any further. Has anyone else experienced this? Does anyone know what this error code means? Is there a way to force the SP to install despite this error code (it does get to 100% at stage 3 after all, so maybe it does install, but one of the packages check routines is picking up an error which doesn't really exist???)
View 9 Replies
View Related
Feb 15, 2010
Is there a way to install my HP1317 printer to my laptop which has Windows Vista? The cd to install the printer only works with Windows up to XP.
View 5 Replies
View Related
May 15, 2010
I am using Win Vista, 32bit. I have a upgrade disc to vista 32bit. Can I possibly use that to re-install my OS. I have a virus Or I want Win 7 too, so can i upgrade to that by paying less? If not i will stick with vista.
View 9 Replies
View Related
Feb 27, 2008
i will be upgrading my Dell desktop from XP Pro to Vista Ultimate in the coming days and i need some opinions. I've never upgraded OS's before but i do understand the difference between a clean install and an in-place install. My question: what would you do and why would you chose one over the other?
View 7 Replies
View Related
Apr 11, 2008
This is my doubt,
I have 8GB RAM installed (max for my MoBo) and 2 Video Card 512MB.
So this will mean that my Vista Home Premium x64 have to deal with 9GB
RAM.
How can I be sure that it takes full advantage of all RAM?
In My Computer > property shows 8196MB RAM, my doubt is if really when
I am in Crossfire mode, my PC is able to use the 1024MB Video Ram to get
the best performance in 3D Game.
If somebody can give me a way to check and even better to allow Vista
to use all 9024MB it will be great.
View 9 Replies
View Related
Jul 19, 2009
Hello, i am thinking of getting a new video card soon, and wanted to know if the card i picked is better than my current one.
The card i want to get is the EVGA GeForce GTX 260 Core 216 Video Card.
My current card is the NVIDIA GeForce 8200.
Is the card i want to buy any better than the one i currently have? I don't know to much about video cards but I think it is better. If it is better, will this card run Race Driver : Grid, and COD5?
View 9 Replies
View Related
Jul 7, 2009
i have a gateway md 7818u and i seem to be experiencing a video lag in games. it is almost like i can play almost no games even games that are old and i shoud easily be able to play like half life 2 lag badly like every 3 seconds or so. i also am having this issue on streaming video untill it is loaded but when it is loaded it runs extremely well. even on Internet when the pink bar is far ahead of where i am
View 9 Replies
View Related
Apr 16, 2009
I just wanted to show the world the best Media Center Plugin I have found!
This is MediaBrowser AND IT'S FREE .................
It can do it all and much, much more! Sort out Giant Library's over multiple HDD's or even PC's Find cover and backdrop's with no help. It has the best UI I've ever seen. I'm going to shut up and let the pictures talk for me! Check it out!........
View 9 Replies
View Related
Mar 31, 2009
There may be many videos downloaded from the online web, including the MP4, FLV, ASF, etc video formats, even the video made by your camera. But how to convert those videos to the Palm AVI format, including convert to Palm Pilot, Palm Treo, Palm Treo. With 4Videosoft Palm video converter, you now have the capacity to do all the above conversion. Then the following guide will show you how to put video on Palm with.....
View 9 Replies
View Related
Apr 2, 2009
the guide will show you how to put video on your ipod with ipod video converter. this powerful ipod converter software can assist you convert mp4, mpg, mpeg, mov, m4v, rm, wmv, asf, mkv, 3gp, mod, tod, etc, even the Internet flv video to your ipod video or audio supporting formats......
View 9 Replies
View Related
Mar 23, 2008
I just upgraded to Media Player 11. I have XP. I downloaded some AVI files and they play, but sound only. Perfect sound, just no picture. They automatically open in WMP just as they should, and I tried right-clicking menus to switch views, but the view is at 100% full screen mode. I get sound, and I get visualizations (like bars and waves, alchemy, etc) instead of the actual movie. I have looked around the forums but don't seem to see anyone having this particular problem. The files are from a P2P site, but I don't think that's the problem as the sound works fine. And mpeg files from the site play fine.
View 9 Replies
View Related
Feb 9, 2009
All had been working well until a few days ago. For some reason, now when I double-click a video file, I can hear the audio but I get no video. I must open WMP manually, and then I get the video of what I'm hearing. I used to double-click a video and it automatically opened WMP.
Then, to close WMP, I must stop the video first. Because if I don't, the audio will continue even though the video will not be seen. I then have to re-open the player, stop the video, then close WMP. I used to close the program (X on the WMP) and it would all (video and audio) close,
View 9 Replies
View Related
Mar 19, 2008
I'm trying to burn a DVD img file with serveral peices of software and nothing is working. I know the image is good, I viewed it with Alcohol in virtual drive. I have tried Nero, IMG Burn, DVDFab, and a few others. It completes successfully but when I view the disc only the menu works the movie is broken up with mpeg blocking and will not play sufficiently. I also tried it in my x32 machine as well and it did the same thing... What am I doing wrong?
View 5 Replies
View Related
Mar 28, 2009
tons and tons of questions from users, who are having problems with windows vista and streaming videos online, like on Internet and every other place online and no real source for handling this issue. no it is not the internetconnection and no it is not the drivers. we have all tried to re-install these 40 times and we all got the newest versions but still the streaming stops, pauses, glitches, hops and simply makes watching videos online a pain in the *** with windows vista.
i have lost my patience ... i've googled, searched, read and read some more about solving this issue with no result yet. please - if anyone out there knows how to really fix this problem, then please write it in this thread, because i feel stupid that i just purchased a new 2000$ laptop with windows vista and a bunch of other cool stuff, and the computer works even worse than my old computer. i really don't want to go back to xp, so please help me fix this issue?
View 6 Replies
View Related
Nov 5, 2008
Well, yesterday i bought an iPod touch... So now i need a converter to convert avi to mp4. I tried a couple but it turned out that all of them don't support x64. so does anyone know a good video converting software? it doesn't need to be specifically for converting to ipod, it can be a more complex "all-in-one" converter also.
View 5 Replies
View Related
May 26, 2008
I have vista, and I have downloaded videos from itoons. Then I burned them on cds. My problem is that once they are burned, I can hear the cds but cannot see them.
View 6 Replies
View Related
