I get an unknown device warning in my device manager. It is for my graphics card. I click reinstall driver. It finds the driver but says it encounters a problem when installing. Its says: Nvidia GeForce 9200M GS access denied. I downloaded new drivers from Nvidia, installed them, restarted, no good. Tried uninstalling the device, restarting, installing driver = no good.
View 9 RepliesI am experiencing a Catch 22 problem with the NVidia GeForce Go 7300 Drive that was pre-installed as part of my system. I have experienced a number of problems with this unit, all reported to Microsoft Windows for solution. Their response; Attachment 7159
I have been through all the recommended troubleshooting steps, without success. NVidia don't want to know because Acer installed it, Acer just don't want to know, and Windows just keep passing the buck. The Device Manager washes its hands on the issue with; Attachment 7160
So on one hand I'm being advised that I have a problem, and that it has been reported [MS Windows], then the answer is given that there is no solution [MS Windows] but if you'd like to check it out, here are four options [each in turn involving NVidia, Acer and MS Windows]..And oh! By the way, you won't find your solution here, either....because nobody in the list will accept any responsibility to help in any way to resolve the problem......Ya!Ya!Ya!....."Catch 22". I think that this Version is Force Ware Vista 97.55, as it shows up in my System Information as 'system32drivers vlddmkm.sys(7.15.10.9755, 4.24MB - 18/01/07.
I am playing alot of games.. I play for example Counter Strike Source. I have 2 gb RAM - Intel(R) Core(TM) 2 cPU 6600 @ 2.40GHz 2.40GHz 64 bit Vista. With Nvidia Geforce 7950 GT. When I for example play source.. and exit it.. It comes like ALot of colors and things.. and cant do anything.. Have to restart the computer to get back.. Same with FIFA 08.. When I start Fifa 08 happens the same thing.. It comes Red/Black/White.. and cant get out or something.. have to restart.. so annoying.. Can only play like Source.. and then after I have to restart to get back to desktop.I cant do ''Alt option''.
View 4 Replies View RelatedI'm running Home Premium 64 on a Sony Vaio Laptop (CS170F). I'm having a curious problem: Yesterday I plugged into the machine the dongle of my wireless logitech mouse, and for some reason the machine said "Your unknown device is ready to use" (my OS is in spanish, the messages may not be accurately translated). Since then, an annoying message pops every few seconds warning about an "unrecognized USB device", that "didn't work as expected". The best part is this, if I click on the tray icon, sometimes the informative dialog window is emply, an other times shows all the USB ports in the system plus one extra with a "unknown UBS device", even without any device plugged into the system. I've tryed removing the unknown device from the device manager, but it shows up again.
Been looking at this card, just want to know a few things. It says PNY, is that like a sub-category of Nvidia? I dont understand it! Also will I need to plug in a power cable or will this card get the power from the PCI-E slot itself.
View 7 Replies View RelatedToshiba Satellite X205-SLi4. Windows Vista Ultimate 32-bit SP2. In Computer Management > Display adapters , I have NVIDIA GeForce 8600M GT listed twice.
View 8 Replies View RelatedBecause I understand very little of the nuances of Graphic Cards, I can't for the life of me figure out which type [SE/LE/GS/GT] of the GeForce Go 7300 Series, I actually have installed in my system. I'm thinking that because the card was installed OEM, the individual identification types, do not actually apply to my system setup. The information tags that I have on the Laptop give the following details;.....
View 5 Replies View RelatedVista 64 ultimate with dual NVidia 8400 GS, on 4 monitors, running non-SLI mode crashed when ever opening a PDF file.
Although the check from newer drivers indicated that the system already had the latest, I installed the latest drivers from NVidia website anyway. The driver installation package ran through without error, and requested a reboot. Curiously, Vista complained that the installation may not have been completed correctly. Ignoring the Vista warning message (what was I to do anyway?), I rebooted. After reboot I was able to open PDF file.
When I originally configured the system, I had attempted to operate my video in SLI mode. I could not get SLI to work with two cards/4 monitors. Ultimately, I configured in non-SLI mode. I now wonder, if trying out different configurations placed the video cards in an unstable configuration - which was cleared up when I reinstalled the drivers.
New nVidia GeForce WHQL Release 175.16 -- 13 May 2008:
http://www.nvidia.com/Download/index.aspx?lang=en-us
WHQL driver for GeForce 6, 7, and 8 series GPUs.
Added support for NVIDIA 3-way SLI Technology.
Added support for GeForce 8800 GTS 512 GPU.
Recommended driver for the latest DirectX 9, DirectX 10, and OpenGL
applications.
Numerous game and application compatibility fixes. Please refer to the release documentation for more information on features, driver fixes, and known issues.
i got a new computer and i wonder if the grafic card will work with game such as BAttlefield 2 and 2142? My grafic card is: NVIDIA eForce g100 512 mb, and when i bought it the salesman told me it would work on this games but im not sure if it will.
View 6 Replies View Relatedhow do i find how much memory my NVIDIA GeForce 9600M GT has installed on my laptop
View 6 Replies View Relatedinstalled this yesterday in cpu and vista x64 home premieum didnt detect it.. the odd thing was i put install cd in and it gave me this error message no xfx product found go online for the latest driver.. that didnt work i downloaded the latest driver for vista x64 and when it oipened it said it wouldnt run because that card wasn't found...i checked my device manager and it showed no display adapter like before when my radeon graphics card was in.. i had my monitor plugged in to it i had a pic albeit not crystal clear but yet windows didnt detect it.. i also went into the bios to make sure that pci express was checked.. i know it was installed properly wondering what the deal is... would really like to get a better graphics card in with cuda aceleration...
View 8 Replies View RelatedI am going to get a new PC and I'm undecided whether to be be happy with the 8400 that comes with or pay an extra £100 (£200) for 2 x 8500 ones. Obviously, the graphics would look nicer but would anything else be affected like how fast the loading time of the games are and do you get more frames per second?
View 4 Replies View RelatedI just now decided to join but I've been looking around the forums for a while now as a guest. Recently I was referred to the website laptopvideo2go.com by these forums. I went there and because I had the old factory installed version 98.15 driver for my NVIDIA GeForce Go 6150, I decided to download one of the newer ones. By the way, I have a HP Pavillion dv6000 laptop. The driver that I chose was 7.15.0011.7770. It installed correctly and everything worked fine except for the fact that whenever I logged on, the screen would flash black and the graphics would become distorted and blurry and my desktop icons would look really magnified. But then, a few seconds later, the black screen would flash again and the graphics would go back to normal and everything would Today, however, the graphics did not revert back to normal. Everything stayed really big and fuzzy. I thought that since the driver that I downloaded from laptopvideo2go.com was not digitally signed, or whatever, that it was the problem. So, I went to the HP website and proceeded to download the original NVIDA update (98.15), that I had previously, for my driver.
It installed like normal until it got halfway in the installation loading bar. Then, my computer suddenly restarted itself and said that Windows did not start correctly and gave me the option to run some repair thing. I did, and it couldn't fix anything. So, I restarted again and got the same thing and went into safe mode and uninstalled my driver. Then, I updated the driver with the same 98.15 update and it worked and told me that I needed to restart. So I did and I got the "Windows did not start correctly" message again and I went into safe mode. The driver had not installed and everything was still big and fuzzy. However, the driver was still deleted. So, I restarted again, got the same message, and went into "Last known good configuration" mode, which I am in now. And, of course, the display is still really big and fuzzy. if you select the start normally option instead of the repair option, it will proceed to load with the Windows loading bar but will do that automatic restart thing before it gets to the Windows Vista logo every time. So, it's like a never-ending loop of restarts. I did some research online and I found out nothing, so I guess that my problem is unique. I'd really like to have my computer's original crystal-clear graphics back, but right now the priority is actually getting it to log on.
so i have a pretty outdated system and i am thinking about upgrading it over the holidays. i am adding 2 gb ram and am looking for a pci (not express)card tht can run aero for around 50$. i am upgradeing from my wimpy little ati raedon 9250. would this card be capable of running aero? With the research ive done on numerous websites i think this card should be able to get the job done. but im just making sure that anyone doesn't know anthing different. also if there are any other better deals out there let me know.
View 4 Replies View RelatedI seem to have a similiar problem. I'm running Vista Home Premium with Nvidia GeForce 8800GT connected via DVI to two ViewSonic VP2030B Monitors.
For some reason I cannot get them into dual mode.
I have a Lenovo Thinkpad T60p and a Lenovo USB Webcam. I installed SP1 and the camera stopped working so I uninstalled SP1 and it still doesn't work, it appears as "Unknown device". Is Microsoft going to publish some solution? I see all the reports and there are a lot people having the same problem.Should I come back to XP?
View 9 Replies View RelatedMy system is "Windows Vist Home Premium AMD turion 64 X2, 960 MB RAM, NVIDIA GeForce Go 6150"... My computer health check always says I need to download the current thing of NVIDIA, which it gives me the link for and says it is an essential download, but then it will not download it, and it will not go away and remains a "critical" pc update needed... which drives me crazy.
My HP Update also scans my computer and recognizes that I need NVIDIA GeForce Go 6150 Grapics Driver, but then it will go through downloading the installation package, and then when the setup initiates it says that I do not have the operating system windows vista.
1 Do i have this NVIDIA GeForce Go 6150 Graphics Driver as my welcome center in my control panel states, or don't I?
2 if I don't have it, how do I get it
3 if I do have it, how do I make it stop coming up in my PC Health Check as a critical thing, and stop coming up on my HP Update???
I have windows vista x64 installed. My system is an AMD 64 X2 6000+, ASUS M2A - VM motherboard. I cannot figure out what device is unknown. Can someone give me any ideas what it could be? I've used Driver Detective and it says all of my drivers are up-to-date.
View 6 Replies View RelatedOS Windows Vista Home Premium: Control Panel - Device Manager - Other Devices - Unknown Device!
View 4 Replies View RelatedI have updated my bios ,update came out last month, and still under the device manager it shows "unknown device". The BIOS recognizes it and the Sytem under Control Panel recognizes it. Anyone with the same issue? I don't have any performance problems and didn't even with the old bios. I attached a screenshot.
View 9 Replies View Relatedi have updated my system to ultimate x64 sp1.
now in device manager, i found one unknown device(which is shown in Other Devices in Device manager), i tried most of drivers for it.
but not able to get it. i even do not know what device it is.
i just joined this forum in hopes of finding an answer to my problem, i have also searched the posts relating to my problem. A few days ago my pc was dropped of a stand with the monitor and everything connected. The onboard gfx does not work anymore (nVIDIA 6100 Geforce 405) and the plug is loose so i installed a nVIDIA 6200 Geforce PCI card, everything is fine till i go to run a high graphics game like WoW or SecondLife.
They work for a few seconds then the screen gets all messed up then goes off and back on, then a Hazard Sign in the System Tray pops up that says "Display Driver has stopped responding and has Recovered". Now i know enough to solve certain issues but this has me stumped, i've updated my drivers, even lowered the resolution to try to get the game to work but it does the same thing, now ive had this card in before a few months back, worked fine, then i took it out and went back to the onboard gfx. now the PCI card is giving me issues.
I try to access folders under my name (set up as administrator), most of the time I get access denied. It is driving me nuts. I want to change the start menu and get rid of a bunch of garbage but I can't enter the folder to do so. When I use the start menu program, it only has a few basic folders. This happens frequently, even when trying to view pictures or video in the folder. What do I need to change to remove this very annoying problem?
View 9 Replies View RelatedI think I might have a good one for you.. I am working on an Acer 5610z Notebook for a friend of mine. He was setting the parental controls and managed to control his account which had admin access. the user listing has the account listing as an admin but he only has standard user access. His was the "only" admin account.. While he was doing this he managed to deny access to the boot drive. The drive reads as "Access Denied". The machine boots up and a person can play games etc.. but network access is restricted.
View 8 Replies View Relatedi have recently tried to access Documents and Settings but am getting ACCESS DENIED for some reason yet i have done NOTHING to change my admin rights yet there seems to be an option for EVERYONE to access it but admin is not allowed to and it wont let me configure it that way. i have deleted EVERYONE from the properties and tried to revert to normal ADMIN user rights but it wont let me view docs and setts folder at all
View 9 Replies View RelatedI have an ASUS M2N-Sli Deluxe mother board with a AMD Athalon 62 x2 (Dual Core) 2800Mhz 5600+ Cpu, With Nvidia nForce 570 SLI MCP Chipset and 2x nVidia 8600 GT 256RAM. I have been using this set up for over 2 years.
Just last week the fans on my Graphics cards over heated and kinda melted for no reason, I wasnt watching a movie nor was i playing a game. Due the fan on the GPU melting i orders some new ones ie NorthQ (NQ-3860A). The fans work fine and are keepint the GPU cool enough, But i cant detect and of the cards on device manager and i cant change the resolution nor can i load nVidia control panal so i can change the resolution from there and set up the SLI cponnection.
I have also found that with the second GPU When put in the PCI slot comes up with Green lines and a very very unclear picture. Can any one please help me as i have the computer connected to a 32 inch lcd tv and it hurts my eyes, besides that i cant watch any movies
Have a 6 in 1 USB 2.0 Internal Media Card Reader on an old eMachine (D2266) that ran and worked on Win XP Pro x32. There is no Manufacturer's ID Tag anywhere on this unit. I installed this card reader into my Vista Home Premium x64 machine. Then plugged into an available motherboard USB port and turned on computer. The power light on the media reader lit indicating power, and Vista claimed "device successfully installed". Inserted a SD media card and device is not working. A check of device manager reveals an 'Unknown Device" on the roothub a check on the 'Drivers Tab'reveals "There are no installed drivers for this device" or something to that effect.
Search tells me the file exists but will not tell me where. Access denied. "To access, click Security Tab"
Security Tab shows permission granted for Administrator and [User]. I am both User and Admin.
Why don't I have access to my own account? The folders, My pictures, My
videos, my music, etc? It's my own account, what up with this?
The sercurity settings for permissons were changed by another person using my computer. They have denied all permissions as the administrator and i am now unable to use or change any of the settings on my computer as access has been denied to C Drive, is there a way to undo these settings to reset the sercurity settings?
View 9 Replies View Related