Undo Bitlocker Drive Preparation Tool
Mar 26, 2008
I read in the BitLocker ReadMe that a TPM was recommended, but not required. So I ran the BitLocker Drive Preparation Tool and let it add a new boot partition. So now I have an extra volume, S:. I then saw a message that a TPM is required. Upon further reading, I discovered that the requirement can be turned off, but the alternative is to use a USB flash drive as a key. The inconvenience of this solution is not worth it for me, so I will use Ecrypting File System (EFS) instead. Had I known this in the first place, I would not have ran the Bitlocker Drive Preparation Tool.
System Restore changed the drive letter of the volume, but nothing else changed. How can I undo what Bitlocker Drive Preparation Tool did? I know that in general, I need to move boot files and change the active partition, but I am afraid of making my systen non-bootable.
View 7 Replies
ADVERTISEMENT
Mar 23, 2008
I read in the BitLocker ReadMe that a TPM was recommended, but not required. So I ran the BitLocker Drive Preparation Tool and let it add a new boot partition. So now I have an extra volume, S:. I then saw a message that a TPM is required. Upon further reading, I discovered that the requirement can be turned off, but the alternative is to use a USB flash drive as a key.
The inconvenience of this solution is not worth it for me, so I will use Ecrypting File System (EFS) instead. Had I known this in the first place, I would not have ran the Bitlocker Drive Preparation Tool. System Restore changed the drive letter of the volume, but nothing else changed. How can I undo what Bitlocker Drive Preparation Tool did? I know that in general, I need to move boot files and change the active partition, but I am afraid of making my systen non-bootable.
View 7 Replies
View Related
May 16, 2009
My Dell does not have TPM. I am using bitlocker with a USB. I notice that the Recovery drive is neither protected nor eligible to be protected. I am wondering whether this is a weakness in my protection.
View 7 Replies
View Related
Apr 15, 2008
How can I confirm that BitLocker is indeed turned off? Microsoft provides the instructions below, but this is after it has been on. I see no BitLocker options under Control Panel, Scenario 5: Turning off BitLocker Drive Encryption Scenario 5 describes how to turn off BitLocker Drive Encryption and decrypt the volume. The procedure is the same for all BitLocker Drive Encryption configurations on TPM-equipped computers and computers without a compatible TPM. When you turn off BitLocker, you can choose to either disable BitLocker temporarily, or to decrypt the drive. Disabling BitLocker allows TPM changes and operating system upgrades. Decrypting the drive means that the volume will once again be readable, and that all the keys are discarded. Once a volume is decrypted, you must generate new keys by going through the encryption process again.
Before you start You must be logged on as an administrator. The drive must be encrypted. To turn off BitLocker Drive Encryption Click Start, click Control Panel, click Security, and then clickBitLocker Drive Encryption. From the BitLocker Drive Encryption screen, find the volume on which you want BitLocker Drive Encryption turned off, and click Turn Off BitLocker Drive Encryption. From the What level of decryption do you wantdialog box, click either Disable BitLocker Drive Encryption or Decrypt the volume as needed. By completing this procedure, you have decrypted the operating system volume.
View 4 Replies
View Related
Mar 27, 2007
Windows Vista includes a new hard drive encryption feature called BitLocker Drive Encryption. BitLocker can be a very useful security feature for businesses and home users that have sensitive and confidential information stored on their computer. Unfortunately, BitLocker Drive Encryption by default requires a Trusted Platform Module (TPM Chip) version 1.2 or later installed in your computer. A lot of the computers and laptops on the market do not come with TPM chips installed since they are typically only found in premium model business computers. If you have Windows Vista Business, Ultimate or Enterprise but do not have a TPM chip, you can still use BitLocker Drive Encryption.
Hidden away in local group policy is a setting that will allow you to turn on the ability to use a USB storage device instead of a TPM key to store the encryption key. This is a great feature for users that don't have the latest high-end hardware because you can still use hard drive encryption. However, every time you turn on your computer, the USB storage device that has the encryption key located on it must be plugged in. Without it, your computer will not boot up. One BitLocker Drive Encryption is setup with a USB storage device, that USB storage device basically becomes the key to your computer.
Follow these steps to turn on the ability to use a USB storage device with BitLocker Drive Encryption on hardware that does not have a TPM device:
Click on the Start Button and key in gpedit.msc and hit Enter....
View 0 Replies
View Related
Mar 23, 2008
I am about to purchase a Dell M1330, which doesnt offer a TPM module. I also don't want to deal with plugging in a USB Flash drive every time I boot up (which could get stolen with a laptop). I have the following questions regarding Bitlocker
1 Can I still use the Bitlocker feature of Windows Vista with a TPM module or USB flash drive? 2 Are there any articles that document how secure Bitlocker is in keeping your data safe if your laptop is stolen? 3 If for some reason that operating system gets corrupt, is there a way to extract my data off of the hard drive if I have the encryption keys?
View 5 Replies
View Related
May 2, 2008
Anybody can recommend a Diagnosing tool for Hard Drive?
View 7 Replies
View Related
Jun 9, 2009
update on Presario laptop, which came pre-loaded with V-SP1. When XP-SP2 came out it was very important to do a bit of prep before installing the service pack: cleaning the system, turning off AV and running progs, etc. Doing so always insured an incident free process and it worked dozens of times for me. Is there a preparation protocol for Vista's SP2?
View 5 Replies
View Related
Mar 23, 2008
I have Vista Home Premium running on a PC with a 40GB C drive primary hard disc. My programs are on this C drive, all my docs etc are stored on either of separate D drive and H drives. My primary drive is running at about 30GB used/10GB free space. I continually clean out my C drive of temp files etc, clear my cache but how much space would I re-gain by using the Compress Drive tool (visible when I look at C drive properties)?
View 4 Replies
View Related
Jul 29, 2009
Today I have noticed that all of the folders on my computer are set to read-only, according to the properties menu, the Read Only box is blue. I looked through a similar topic on this message board, and the solutions were not effective in solving this problem.
In addition, this not only has affected every folder on my computer (including Documents), but it affects new folders as well. When I create a new, empty folder, with no files in it whatsoever, it is still marked as Read Only with a blue box.
View 6 Replies
View Related
Mar 26, 2008
I have a dual boot setup that has Vista on one sata hard drive and Windows XP on another sata hard drive. If I remember correctly, I installed XP 1st and than Vista. I now want to keep the current system running with XP and remove the Vista hard drive and install it in a new computer I am building. I'm guessing I will have bootup issues on boot on both pc's once I remove the Vista hard drive.
View 4 Replies
View Related
May 15, 2010
i used the full system recovery on vista home basic of my friend's laptop and i forgot to backup his files.. is it possible to undo the system recovery like we always did in system restore.? i ask this bcoz the laptop is not in my hand right now so i cannot look if there
is an undo option of system recovery.
View 4 Replies
View Related
May 18, 2008
When I try to undo a restore point, a get an error message that the operation has failed because of an unknown error. Then none of my other restore points will work, either.
View 9 Replies
View Related
Sep 13, 2008
It successfully unabled my previous version, and conveniently failedto install the new version. My PC is now deaf.How can I undo this unstall, or better, how can I find the download site?It is now impossible to go to the download site thru Vista forum. (and why
is that?)
And other sites try to sell this stupid Driver Detective software and not the Realtek update.
where I can download Realtek new version,or else, tell me how to undo the uninstall I did.
View 9 Replies
View Related
Apr 18, 2010
I accidently hit the UNDO button instead of the spell check while composing an email... I lost several paragraphs of my email, is there anyway to restore my email to it's orginal content or retrieve my original email?
View 4 Replies
View Related
Jun 14, 2009
i have a Vista home premium 32 edition.
1. Once by mistake I okayed i to be added as a word in the spell check. Many times I type in i as there is not enough pressure on the shift key. Question - how do I restore my word dictionary to undo i as an incorrect word?
2. My spell check does not pick up small case for the start of a sentence/paragraph? How do I fix that?
View 8 Replies
View Related
Jun 30, 2008
how to use this program? I try it once on my drive and it created another smaill drive. why? Even though now I reformated my computer back to original way it was before this. I am now curious as to what this program does and how to use it?
View 5 Replies
View Related
Oct 2, 2009
I have Vista Ultimate SP2 and want to use the BitLocker. I need to know which instructions to use. With or without the TMP. How can I find out if I have the TMP or not?
View 6 Replies
View Related
Jun 13, 2008
I have been using bitlocker on a Sony Vaio - with TPM. Yesterday someone used my PC to check an XP installation CD. They booted from the CD and when they reached the setup screen, they exited. After that I had to enter my key as I booted the PC - indicating that bitlocker had detected a change. The way to stop having to do that is to turn bitlocker off and then on again.I turned bitlocker off, but when I went to turn it one again, it tells me that my system is not configured to use Bitlocker. It tells me to remove any bootable CD or DVD and reboot and if that doesn't help to upgrade my BIOS. There are no CDs or DVDs and my BIOS is the latest version - and was working yesterday with Bitlocker. I am assuming that the XP instalation CD has in some way altered my disk drive so that it no longer appears to be configured to use Bitlocker. I have run the Drive Preparation Tool,
View 4 Replies
View Related
May 1, 2009
Bitlocker and Bitlocker for Windows 7 are supposed to be great at preventing stolen disks or stolen computers from having their disks compromised by being installed in another computer (or by booting the computer with another OS).
But, if you steal a computer, there are lots of tools on the 'net that will crack logon passwords. How does Bitlocker help in these situations? If someone can crack the logon password, then they *are* the person that the BitLocker disks are decrypted for.
View 5 Replies
View Related
Aug 15, 2008
i have just purchased by new machine which came with vista ultimate 64bit SP1 pre installed. the bit locker will not work as there is no TPM found is says a TPM is required to turn on bitlocker. i know you can use a flash drive every time you start up the machine but i dont want to do that. Does anyone know how i can get a TPM or know a solution - i read something about upgrading the bios but i dont know what bios i have!
View 5 Replies
View Related
Aug 8, 2008
Can I use Bitlocker on this laptop? Disk layout = Premium- XP Pro- Storage- Ultimate The storage partition is an extended partition. If I can use BitLocker on this laptop will it protect all 4 partitions?
View 9 Replies
View Related
Mar 23, 2008
read the following negative about bitlocker. Can anyone confirm these and even point me towards an official MS document confirming these
1. non-Microsoft software updates will require you to completely disable BitLocker before you start
2. System upgrades will require you to decrypt the volume
3. Only volume containing OS and system files will be encrypted. Other volumes are nto encrypted by bitlocker but can be encrypted using EFS. Will there be any support for bitlocker using certificates issued by Active Directory enabled PKI services? (microsoft certificate services)
View 4 Replies
View Related
Mar 23, 2008
I have a Tecra M5 (PTM51E) running Vista Ultimate. I would like to configure Bitlocker using the TPM which is on board. I am aware that Bitlocker can be used without a TPM, but this requires the user to have an external token e.g. on a USB drive which they have to insert at boot time. I would rather use the TPM mode so there will be no need for this.
I have flashed the BIOS to v3.60 which is the latest. Before I was able to flash the BIOS from within Vista (which is the only option provided on the Toshiba European support site) I found I had to load the drivers for the "Value Added Package", without this the BIOS updater simply says "Computer not supported". Another way to do it is get the BIOS for the PTM51U from the US site which allows you to write the BIOS updater onto a bootable floppy...........
View 6 Replies
View Related
Jul 6, 2008
I ran an .exe file in order to remove that little blue line at the bottom that is supposedly a "hidden" taskbar, and now I can't seem to undo it. When I load windows the taskbar is there, but without the clock and the system tray icon'd programs. Then I run the hidetaskbar.exe and it goes away completely which is great, but how do I access the system tray programs?
In particular, I'm having trouble with Trillian (a chat client that controls aim, icq, yahoo, msn all at once). When it starts up it goes immediately to the system tray, so it has been rendered completely inaccessible to me. I can't alt+tab to it, I can't switch to it in the processes window, I can't even access it's options to change it so that it doesn't minimize to the system tray on startup. = ugh. I can't remember the website I got the file from, and I don't even know if they have an undo version.
View 6 Replies
View Related
Jun 19, 2008
happened to my choices of "file," "view," etc. when I open Windows Explorer?
View 7 Replies
View Related
Oct 31, 2009
How to change the location, left or right, of the tool tip or baloon tip that apeear when you point the mouse over a button?
I remember that I was asked to choose either right or left and cán't remember where to undo it.....
View 3 Replies
View Related
Mar 25, 2008
I have a new PC running Vista Home Premium. I tried the snipping tool soonafter I received the computer three weeks ago. It appeared to work fine atthat time. I just tried to use it again but could not find the shortcut. Ithad been in the start menu under accessories but it was no longer there.
Using the Search facilities I found the program file "Snipping Tool.exe" onmy hard drive. I created a new shortcut but the program will not start,nothing happens. I also tried double clicking on the "Snipping Tool.exe"file.
View 9 Replies
View Related
May 27, 2009
Those of us who installed SP1 may remember that there was a cleanup tool (vsp1cln.exe)There is now a tool for sp2 called compcln.exe See: SP2 Disk Cleanup Tool. Once this tool has been run, SP2 cant be removed
View 6 Replies
View Related
Jun 4, 2009
Right now i'm running vista ultimate with a Q6600 and 4 gigs of ram. but i do graphics professionally and video a LOT so the memory is maxed out already. I'd like to prepare for the future with the 64 bit. i'm considering upgrading from a 32 bit to a 64 when Win7 is released later this year. with what i've researched already, i think my system should be able to handle it ok, but i was wondering if there were any kind of software tools that would check a system and advise what will NOT handle it. along the lines of the vista upgrade tool that was available.
View 5 Replies
View Related
Jan 5, 2009
i just got windows Vista Home Premium X64 a couple days ago and so far i have just a couple problems that i can't figure out. Well first of all i can't get the switching between windows thing to work correctly. My Girlfriend has Vista Home Premium also but she has 32 bit. But on hers the switching between windows is the live tabs of each window. And also when you hover the mouse over a minimized window on the taskbar its shows a live icon window of that window, but on mine it's just a tool tip. Another thing is i cannot change my colors of my taskbar and active windows. On my girlfriends PC when you go to the control panel and go to customize then colors it shows some different colors and it changes the taskbar as well as the windos but on mine its way different when you go to change the colors. And one last little question I have read about the Aero thing.. not sure exactly what it is.. i think its a theme right? well i don't have it under my themes list.
View 4 Replies
View Related
