When I go to TOOLS, ACCOUNT, PROPERTIES - and try to see "CONNECTIONS" my system hangs and eventually says Windows Mail not responding - Close? What do I need to do? Can I download a new Windows Mail. My problem is when I try to send or receive it asks for a dialup connection and I don't have one. I want it to connect on my wireless connection??????? I am using Windows Mail 6.0.6000.16386 and vista_rtm 061101-2205.
View 7 RepliesI have a Asus PW5 DH Deluxe with dual Marvell Yukon 88e8503 Gigabit network adapters and a Realtek Wireless adapter intergrated into the motherboard. I've been running Vista Ultimate x64 for well over a year with absolutely no issues whatsoever. This past Wednesday evening I finished using the computer, left it on like I normally do and left my office. When I came in the next morning none of the NICs where working. All I get is the "X" over the icons showing that nothing is plugged in. I tried all of the onboard NICs with no luck, I tried new cables, new drivers, I even tried a different router although all of the other machines on the network are fine. I looked and saw that some Windows updates were installed the previous night, suspected that they were the culprit I uninstalled them with no luck.
I tried Winsock reset, no luck. I installed a new NIC, no luck. I was going to do a system restore but for some reason my computer only had two restore points. The latest one being the reboot from the Windows updates being installed. I'm running Kaspersky Internet Security 2009. I've disable the firewall even though without getting a network connection period I don't see that being the problem. It didn't help.
All of the other machines on the network are humming along nicely, including the one I'm making this post with. Do you have any ideas that I could try? I really want to NOT wipe and reload this system if possible. My gut tells me this is from the Windows updates but then why didn't uninstalling them help.
I have a Windows Live Mail account and a Yahoo account and they both show up on the left hand side of my Window Live Mail account so I can choose which account I want to use or, for example, which inbox to look in. At the bottom, also on the left hand side of my Windows Live Mail account, it shows 'Add e-mail account', which is what I want to do with a new 'AOL' account and I want it to show on the left hand side like the two other accounts.
So I made a new AOL e-mail account, clicked 'Add e-mail account' at the bottom of my 'Windows Live Account', then I put in my new AOL e-mail account and password where it showed me. Then I clicked next.
The next page was all about my email server. When I did this before with a new e-mail account, it was all filled out automatically for me, but this time, all the blanks were left open and I have no idea what to fill in. I believe once I have this information, the AOL e-mail account will automatically then show on the left hand pane of my Windows Live Mail account below the other two accounts.
The host 'jovinerivera@microsoft.com' could not be found. Please verify that you have entered the server name correctly. Account: 'jovinerivera@microsoft.com', Server:'jovinerivera@microsoft.com', Protocol: POP3, Port: 110, Secure(SSL): No,Socket Error: 11003, Error Number: 0x800CCC0D
View 8 Replies View RelatedI have vista home premium on my dell pc.I set up my email acct.and have had no problems but after setting up a second acct.for more personal things i was not able to send emails only receive.All of a sudden i can't log into second acct without receiving this error message Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.att.yahoo.com', Server: 'pop.att.yahoo.com', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC0F I have restarted my pc and went directly to second acct.and it worked a couple times but now can't get in
View 4 Replies View RelatedI had some problems with my computer last week VIRUS. I had to bring it back to the store so they could format the whole thing and reinstall. Before that my email on hotmail.com was working on windows mail with all the options. But since then my account isn't workin anymore I have to work with the Hotmail Window. We have a whole less options in that systeme.
View 4 Replies View RelatedWe just got a new computer and we are trying to set up our windows mail accounts. how do we fill in the server information for POP3 and SMTP? We have accounts with verizon.net. Is it POP3.verizon.incoming and SMTP.verizon.incoming or some other configuration?
View 4 Replies View RelatedI keep getting this error: Account: 'POP.marshall.edu', Server: 'POP.marshall.edu', Protocol: POP3, Server Response: '-ERR [AUTH] Invalid login', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92 and it looks like it's getting ready to work for a second, and then a window from Windows Security pops up wanting me to verify my username and password to logon to my server, which I put in, correctly, but then the window pops up AGAIN and AGAIN- giving me the error message.
View 4 Replies View RelatedI have vista home premium, and i would like to know if you can get "TweakUAC" to work on a standard account. Looking at the TweakUAC properties, on the sercurity tab > Advanced > permissions, my user name on the standard account, says " not inheirited" Can i get these permissions from the admin account, inheirited to my user account. Or is all this down to group policy, which i dont have....
View 6 Replies View RelatedI have tried changing the server from 465 to 25 but it still gives me the below error: An unknown error has occurred. Subject 'Donation and Sponsorship requests for 6th Annual Golf Classic to support the Susan G Komen 3 Day Bouncin' Buckeyes Team', Account: 'Rachel 's Gmail', Server: 'smtp.gmail.com', Protocol: SMTP, Port: 465, Secure(SSL): Yes, Error Number: 0x800CCC0B An unknown error has occurred. Subject 'Donation and Sponsorship requests for 6th Annual Golf Classic to support the Susan G Komen 3 Day Bouncin' Buckeyes Team', Account: 'Rachel 's Gmail', Server: 'smtp.gmail.com', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Error Number: 0x800CCC0B
View 8 Replies View RelatedQuote: Vista has major problems with USB. Google and you will see thousands of people suffering similar problems. Microsoft just do not seem able to fix the USB problems in Vista My problem is that just occasionally my USB connections fail (disconnect) for no apparent reason.............
View 4 Replies View RelatedI have a network with two computers, one with XP and the other one with Vista Ultimate. Both computers are wired to a Lynksys router. Before the Vista installation, I had no problem. Now, when I boot and try to go on the net, I got an error message "There is more than one active network connection on this computer."
Th only but cumbersome solution I found was to go in "Network ans sharing Center" where there was not only my private network but also an "unindentified public network". I had to disable the local connection for it then go to diagnose and repair in order to reinstall the local area connection. After that, everything is fine ... until the next reboot.
It appears that in Vista, the DNS server(s) for a PPP connection are always favored over those from other connection regardless of the service provider order defined. This can be verified by using the nslookup command without any arguments and looking at the Default Server that is displayed. This is different than XP. Is there any way to change this?
View 4 Replies View Relatedwhat does bridging a connection do? on my manage network connections tab. i highlight the 2 connections, right click, and click on bridge connections. what does it do exactly?
View 4 Replies View RelatedIn Windows Vista the networking components were designed to be much more intelligent and automatically adjust the network settings to optimize the connection speed. This is a great new feature. Your network components basically tweak themselves for optimal performance. In most situations, these components automatically adjust perfectly for best performance. However, with wireless WAN cards the detection of network conditions is flawed and can result in slower network performance.
To fix this problem, Microsoft has released a hotfix for users affected by this issue. If you have a Wireless WAN device, I suggest you give this hotfix a try....
I have four computers on a very basic network. one computer running windows vista business. one running xp pro. and two running windows xp home. I have set them up so now I can see and enter all computers from any computer I think. the problem is when I tried to open up a remote desktop connection to one of the other computers I kept getting this message. THIS COMPUTER CAN'T CONNECT TO THE REMOTE COMPUTER? i THINK MOST OF YOU WILL KNOW THE REST. Also if any person is having trouble with their computers not seeing each other then do what I have done. I was having trouble connecting all my computers upto the network until I bought a copy of Microsoft live one care and installed it on to three computers and now everything is ok. but I still cannot connect to a remote computer.
View 9 Replies View RelatedI have a Zepto (company went bankrupt) computer with a Vista peremium 64-bit os. For about 2 months ago i reinstalled the computer but it was yesterday i needed my wlan card for first time. I can use my wlan but i can use wired internet. I have tried both old and new drivers. I got the computer wlan switch on but i still can't enable wlan under Network connections. Everything under the device manager is installed and working correct. When i enbale My wireless network it does not change. It is still disabled. When i try to enable it true my Ralink (wlan card distributor) software it just say "Switch radio state fail". I'm completely out of ideas now.
View 9 Replies View RelatedI recently updated my vista home and since then I have no network connections whatsoever. I have uninstalled and reinstalled the drivers for my Intel pro/wireless 3945 ABG network connection and it still doesnt work. I emailed microsoft support and after 2 days they said check the knowledge base or post here...
View 9 Replies View RelatedWhen I try to hookup (an e-mail received) "Remote Invitation" (.msrcIncident) from my Vista (Business) to my Vista (Home Premium) machine (from where the invitation originated) it is not received. The Business Vista machine accepts the correct password but I do not even get a dialog on the Home Vista box asking for permission to let somebody access the system. I get a dialog "Remote Assistant Cannot Make the Connection"......
View 9 Replies View RelatedI just installed SP1, uneventful and everything seemed fine. But when finished my network services totally fail. I try to open network connections and instead explorer totally locks up and unable to to anything. Cannot connect to internet. Says "server communication failed" when I mouse over the network icon on toolbar. Was forced to restore to pre-SP1 and everything is fine again
View 5 Replies View RelatedIn WinXP's Network Connections, there is an advanced settings option in the advanced menu, is there such a place in Vista? The reason I ask is I have computers with XP and NetBeui; I have File and print sharing, and Client for MS Networks checked for NetBeui, and unchecked for TCP/IP. I want to do the same in Vista. NetBeui works for a wired connecton in Vista, but I have yet to get it to work wirelessly.
View 5 Replies View RelatedIs there a program that can throttle local internet connections (local as in your own computer) that works on, or more preferably, optimized for vista x64? I already looked into netlimiter, I was wondering if there is anything else that I missed that you guys are using.
View 5 Replies View RelatedI have this in my registry, and since when Vista flubs wifi connections it sometimes comes up with a 169.... (though can't recollect if it is precisely 169.254.183.232) address (via ipconfig) I wondered whether this was the cause. What is it, where did it come from, do I need it, (how) can I get rid of it?..............
View 4 Replies View RelatedOn a fresh install of vista ultimate x86 if i increase my half-open TCP connections ,then on restart my PC freezes on the first black bootscreen & then BSOD Utorrent was killing my browser(firefox) so ive tried to patch the TCP connections again & again , same sad outcome - Unbootable PC. Ive just built it
Abit AN52,Ath6400,2GB OCZ800,2xWD500GB AAK,Hitachi160GB S,8600GT ,Pioneer212 ,650W PSU.
Today ive installed Vista Ultimate x64 & im having no problem browsing with Utorrent running but im not used to a 64 bit OS, if i have any problems id like to return to x32 & keep my torrent client why something so small as to open more internet connections would kill my PC.
In a few days in takes away the admin, I get some weird connections via IP 6 media connected. when I try to release the state it say requires elevation and I don't have admin rights. I always see a protected storage running S-1-5-21-4158074477-3187036503-3076259393-1000. There is many other files as well. No matter if I load windows today, when I look in the directories they will all have todays date. In a few days It has new directories dated 11-02-06. and funny names like WIFEMAN.dll BIGKID.dll savedgames.dll.
View 4 Replies View RelatedThe Network and Sharing Center displays a Network Name preceding the Network Type (Public or Private) both of which can be modified. Under the Control Panels | System |Advanced system settings under the Computer Name tab you can view the Workgroup Name and of course modify. I understand the importance of having the Workgroup Name consistent between my XP and Vista computers. Should the Network Name be the same as the Workgroup Name? Does the Network Name have any function in network connections?
View 4 Replies View RelatedI just setup a wireless USB adapter on my sister's PC. It worked fine, until she rebooted. Now she can't get on the internet. The wireless signal is excellent at 100%, but browsers aren't connecting. I looked in Network Connections, and there's 4 networks. 1394 Connections 1-3. Connections 1 & 2 are doing nothing, but 3 is the one showing the wireless connection (and it looks to be working fine). The fourth network is Local Area Connection, which is doing nothing. What can I do to fix this?
View 6 Replies View RelatedThe new Network and Sharing Center in Windows Vista is great for the average Windows user but can be a huge headache for advanced users. When I need to make a change to my network settings I don't want to be forced to go through the networking interface for the average non-technical users. I want to go right to the settings screen and make the change.
I am a big fan of the old Windows XP network approach where I could modify all of the network settings and connect to wireless network from the Network Connections screen. In Windows Vista, the Network Connections screen still exists, as shown above, but you have to go through the Network and Sharing Center screen first. Using a very useful explorer trick I discovered when playing with "::" and explorer class IDs, you can create a shortcut that will take you directly to the Network Connections screen.
Right click on the desktop and select New and then Shortcut.
In the location box, copy and paste explorer.exe ::{7007ACC7-3202-11D1-AAD2-00805FC1270E} and hit Next....
I am really not very good with hardware, but I want to install some new USB 3.0 ports. I have selected a card, ASUS U2S6 USB3.0/Sata3 6Gbps PCIE Card and I want to install it. I have checked my computer and I do have the required PCI-E port. That is not the problem. Just two questions:
1) This website seems to suggest that it will only work on some very selected motherboards. Asus U3S6 USB3.0 & SATA 6Gbps PCI-Express Controller Card [U3S6] Controller Cards SATA III 6Gbps
Compatible motherboards: P7P55D Deluxe, P7P55D EVO, P7P55D PRO, P7P55D, P7P55D LE, P7P55 LX However, my motherboard is not listed. I thought that PCI-E cards were just meant to be insert and install drivers. Is this not the case?
2) Also, I have noticed that this card does not require additional power. Does this mean that it might not be able to power some of the more power consuming USB gadgets that I might buy? Therefore, would this be a better choice: UNITEK 2 Port USB 3.0 PCI Express Card Reviewed.
I do have a spare Molex power cable, so that would not be a problem, though an extension would be required (again not a problem) I do like the idea of having the extra SATA3 connections (and I know that using them may slow things down) but primarily this is for my USBs, so I want proper functionality.
In Windows Vista, when right-click the drive, Properties, the "Explore' and "Open" show "????(X)" and "??(O)" repectively.
View 7 Replies View Relatedi was using a tweak guide to help speed up my computer running Vista Ultimate 64bit. I must have unchecked a box that turns off the display of picture properties as you hover the pointer over the picture. I don't even remember what it is called anymore so it makes it hard to find out where i must have unchecked it at. If anyone knows where in my OS i could find this and get it back i would truly appreciate it. Didn't think i would miss it, but i do.
View 3 Replies View Related