I just installed SP1, uneventful and everything seemed fine. But when finished my network services totally fail. I try to open network connections and instead explorer totally locks up and unable to to anything. Cannot connect to internet. Says "server communication failed" when I mouse over the network icon on toolbar. Was forced to restore to pre-SP1 and everything is fine again
View 5 RepliesI have a network with two computers, one with XP and the other one with Vista Ultimate. Both computers are wired to a Lynksys router. Before the Vista installation, I had no problem. Now, when I boot and try to go on the net, I got an error message "There is more than one active network connection on this computer."
Th only but cumbersome solution I found was to go in "Network ans sharing Center" where there was not only my private network but also an "unindentified public network". I had to disable the local connection for it then go to diagnose and repair in order to reinstall the local area connection. After that, everything is fine ... until the next reboot.
I have a Zepto (company went bankrupt) computer with a Vista peremium 64-bit os. For about 2 months ago i reinstalled the computer but it was yesterday i needed my wlan card for first time. I can use my wlan but i can use wired internet. I have tried both old and new drivers. I got the computer wlan switch on but i still can't enable wlan under Network connections. Everything under the device manager is installed and working correct. When i enbale My wireless network it does not change. It is still disabled. When i try to enable it true my Ralink (wlan card distributor) software it just say "Switch radio state fail". I'm completely out of ideas now.
View 9 Replies View RelatedI recently updated my vista home and since then I have no network connections whatsoever. I have uninstalled and reinstalled the drivers for my Intel pro/wireless 3945 ABG network connection and it still doesnt work. I emailed microsoft support and after 2 days they said check the knowledge base or post here...
View 9 Replies View RelatedIn WinXP's Network Connections, there is an advanced settings option in the advanced menu, is there such a place in Vista? The reason I ask is I have computers with XP and NetBeui; I have File and print sharing, and Client for MS Networks checked for NetBeui, and unchecked for TCP/IP. I want to do the same in Vista. NetBeui works for a wired connecton in Vista, but I have yet to get it to work wirelessly.
View 5 Replies View RelatedThe Network and Sharing Center displays a Network Name preceding the Network Type (Public or Private) both of which can be modified. Under the Control Panels | System |Advanced system settings under the Computer Name tab you can view the Workgroup Name and of course modify. I understand the importance of having the Workgroup Name consistent between my XP and Vista computers. Should the Network Name be the same as the Workgroup Name? Does the Network Name have any function in network connections?
View 4 Replies View RelatedThe new Network and Sharing Center in Windows Vista is great for the average Windows user but can be a huge headache for advanced users. When I need to make a change to my network settings I don't want to be forced to go through the networking interface for the average non-technical users. I want to go right to the settings screen and make the change.
I am a big fan of the old Windows XP network approach where I could modify all of the network settings and connect to wireless network from the Network Connections screen. In Windows Vista, the Network Connections screen still exists, as shown above, but you have to go through the Network and Sharing Center screen first. Using a very useful explorer trick I discovered when playing with "::" and explorer class IDs, you can create a shortcut that will take you directly to the Network Connections screen.
Right click on the desktop and select New and then Shortcut.
In the location box, copy and paste explorer.exe ::{7007ACC7-3202-11D1-AAD2-00805FC1270E} and hit Next....
Ever wonder why you get network authentication errors when you are trying access a mapped network share from a process that was elevated by UAC? Josh over at WindowsConnected has a great article on how you can fix this annoying issue:
On Windows Vista when you map a drive under your admin account you will find that your mapped drive is not available after you switch to your full token via a RunAs or Consent dialog. This is by design because there are actually two tokens in play here. What happens is the LSA recognized that you are admin at logon and creates two logons. The first with a "filtered" token or non-admin which is used to render your desktop and the other containing your full token to be available after consent dialogs.
Because there are two separate logons there are separate logon ID's. When network shares are mapped they are linked to the current logon session for the current process token. Meaning you don't have access to the network drive from the alternate logon. This can come into play with logon scripts and a number of other areas where you may require access to a network share from both tokens....
"Windows does not detect any network adapters" Device Manager does not show a network adapter on the list. The motherboard drivers for the onboard network adapters will not install on Vista x64 A Linksys EG1032 network card will not install using Vista x64 Both the EVGA website and Linksys website's latest drivers will not install on Vista x64 An identical computer running Vista 32 bit has no problem getting online Is there a hotfix for this or do I need to buy a 64bit network card?
View 9 Replies View RelatedSo I turned my laptop on today and for some reason it would not connect to the internet. I thought it might be the router so I rebooted that and still no luck. When troubleshooting it says; "This computer does not have a wireless network adapter installed and configured" So immediately I think the driver or my adapter has been uninstalled. If your wondering what my adapter was its; Nvidia nForce Networking Controller (x64 Windows Ultimate) I went on there website and found the driver, installed it and still nothing. I also found another program that was installed; Broadcom 802.11 Uninstaller I really need this fixed ,
View 5 Replies View RelatedQuote: Vista has major problems with USB. Google and you will see thousands of people suffering similar problems. Microsoft just do not seem able to fix the USB problems in Vista My problem is that just occasionally my USB connections fail (disconnect) for no apparent reason.............
View 4 Replies View RelatedIt appears that in Vista, the DNS server(s) for a PPP connection are always favored over those from other connection regardless of the service provider order defined. This can be verified by using the nslookup command without any arguments and looking at the Default Server that is displayed. This is different than XP. Is there any way to change this?
View 4 Replies View Relatedwhat does bridging a connection do? on my manage network connections tab. i highlight the 2 connections, right click, and click on bridge connections. what does it do exactly?
View 4 Replies View RelatedIn Windows Vista the networking components were designed to be much more intelligent and automatically adjust the network settings to optimize the connection speed. This is a great new feature. Your network components basically tweak themselves for optimal performance. In most situations, these components automatically adjust perfectly for best performance. However, with wireless WAN cards the detection of network conditions is flawed and can result in slower network performance.
To fix this problem, Microsoft has released a hotfix for users affected by this issue. If you have a Wireless WAN device, I suggest you give this hotfix a try....
Vista Ultmate
Windwos Explorer cut and paste fails.
1) will not do it.
2) leaves empty folders behind.
Cut and paste to folder of same name always fails one way or another.
Says save folder so I check the do i anyway box and it seems to run but
really does not.
Never had this problem in XP.
From D: to C: or from Pen Drive to C: etc.
And it is very slow doing any kind of copy.
A utilit I have does 60 Bytes / sec.
WE does < 1MByte/Sec.
Very poor performamce through WE.
What can Ido to fix this.
same with SP1 too.
I have four computers on a very basic network. one computer running windows vista business. one running xp pro. and two running windows xp home. I have set them up so now I can see and enter all computers from any computer I think. the problem is when I tried to open up a remote desktop connection to one of the other computers I kept getting this message. THIS COMPUTER CAN'T CONNECT TO THE REMOTE COMPUTER? i THINK MOST OF YOU WILL KNOW THE REST. Also if any person is having trouble with their computers not seeing each other then do what I have done. I was having trouble connecting all my computers upto the network until I bought a copy of Microsoft live one care and installed it on to three computers and now everything is ok. but I still cannot connect to a remote computer.
View 9 Replies View RelatedWhen I try to hookup (an e-mail received) "Remote Invitation" (.msrcIncident) from my Vista (Business) to my Vista (Home Premium) machine (from where the invitation originated) it is not received. The Business Vista machine accepts the correct password but I do not even get a dialog on the Home Vista box asking for permission to let somebody access the system. I get a dialog "Remote Assistant Cannot Make the Connection"......
View 9 Replies View RelatedI have a Asus PW5 DH Deluxe with dual Marvell Yukon 88e8503 Gigabit network adapters and a Realtek Wireless adapter intergrated into the motherboard. I've been running Vista Ultimate x64 for well over a year with absolutely no issues whatsoever. This past Wednesday evening I finished using the computer, left it on like I normally do and left my office. When I came in the next morning none of the NICs where working. All I get is the "X" over the icons showing that nothing is plugged in. I tried all of the onboard NICs with no luck, I tried new cables, new drivers, I even tried a different router although all of the other machines on the network are fine. I looked and saw that some Windows updates were installed the previous night, suspected that they were the culprit I uninstalled them with no luck.
I tried Winsock reset, no luck. I installed a new NIC, no luck. I was going to do a system restore but for some reason my computer only had two restore points. The latest one being the reboot from the Windows updates being installed. I'm running Kaspersky Internet Security 2009. I've disable the firewall even though without getting a network connection period I don't see that being the problem. It didn't help.
All of the other machines on the network are humming along nicely, including the one I'm making this post with. Do you have any ideas that I could try? I really want to NOT wipe and reload this system if possible. My gut tells me this is from the Windows updates but then why didn't uninstalling them help.
Is there a program that can throttle local internet connections (local as in your own computer) that works on, or more preferably, optimized for vista x64? I already looked into netlimiter, I was wondering if there is anything else that I missed that you guys are using.
View 5 Replies View RelatedI have this in my registry, and since when Vista flubs wifi connections it sometimes comes up with a 169.... (though can't recollect if it is precisely 169.254.183.232) address (via ipconfig) I wondered whether this was the cause. What is it, where did it come from, do I need it, (how) can I get rid of it?..............
View 4 Replies View RelatedOn a fresh install of vista ultimate x86 if i increase my half-open TCP connections ,then on restart my PC freezes on the first black bootscreen & then BSOD Utorrent was killing my browser(firefox) so ive tried to patch the TCP connections again & again , same sad outcome - Unbootable PC. Ive just built it
Abit AN52,Ath6400,2GB OCZ800,2xWD500GB AAK,Hitachi160GB S,8600GT ,Pioneer212 ,650W PSU.
Today ive installed Vista Ultimate x64 & im having no problem browsing with Utorrent running but im not used to a 64 bit OS, if i have any problems id like to return to x32 & keep my torrent client why something so small as to open more internet connections would kill my PC.
In a few days in takes away the admin, I get some weird connections via IP 6 media connected. when I try to release the state it say requires elevation and I don't have admin rights. I always see a protected storage running S-1-5-21-4158074477-3187036503-3076259393-1000. There is many other files as well. No matter if I load windows today, when I look in the directories they will all have todays date. In a few days It has new directories dated 11-02-06. and funny names like WIFEMAN.dll BIGKID.dll savedgames.dll.
View 4 Replies View RelatedI just setup a wireless USB adapter on my sister's PC. It worked fine, until she rebooted. Now she can't get on the internet. The wireless signal is excellent at 100%, but browsers aren't connecting. I looked in Network Connections, and there's 4 networks. 1394 Connections 1-3. Connections 1 & 2 are doing nothing, but 3 is the one showing the wireless connection (and it looks to be working fine). The fourth network is Local Area Connection, which is doing nothing. What can I do to fix this?
View 6 Replies View RelatedI was just wondering if it was possible for the computer to boot with a broken motherboard ...
I thought without the motherboard you wouldnt even be able to get to the BIOS ... is this right?
i know this might just be a minor issue but im can't figure out why my icons are not showing up for some "files" like Adobe Extention Packages (.mxp) and (.html, .htm) and such not sure if i have others that are missing really haven't looked at all of them just yet but i can't figure out how to fix that. I am new to the whole x64 Vista so im not sure how it works when it comes to regedit and stuff like that if it's the same as 32 bit.
Additionally i have installed IconPackager by Stardock to try and fix it, no luck. Then i tried Microangelo On Display and that didn't work either. Not sure what else to do. Futhermore i have tried changeing the registry key to the default icon like in Vista 32 bit under HKEY_CLASSES_ROOThtmlfileDefaultIcon and setting the Default Value to "1%" and again that didn't work either. So let's just say i don't know where to go from there.
does anyone no how to fix the broken link for my music in the the start menu when i click it does nowt and when i right click it i get the options __copy__Rename and properties. but when i click properties its empty ,ive tried doing it through reg edit by going to the user shell folders but i see no my music registry to modify.
View 1 Replies View RelatedThis is the 3rd spacebar I have ordered. I realize there is that metal thing and where it goes in the spacebar. I checked as before to see that the metal thing was secure in the plastic holders. It was (as I thought before), and I proceeded carefully to put the spacebar back in (with the metal thing towards the back forming an upside down U). When I did, once again, the metal piece dislodged itself from inside the keyboard and I put it back, however, it's not firmy in the grooves as it was. It works, but feels different than all my other keys and sometimes, and it is not working smoothly. So now I have 3 spacebars with the metal bar. Previously, I taped it so it would not move and it worked, just not perfectly.
View 4 Replies View Relatedi cant open my theme window it says "Your system administrator has disabled launching of the Display Settions Control Panel" can someone tell me how i fix this?? pls..btw im admin so whats going on?
View 5 Replies View RelatedMy copy of System Restore Services on Vista Enterprise SP2 is BROKEN.This is presumabably because of dual boot with a Windows XP problem. I have fixed the XP registry to exclude Volumes it should not overwrite. I have tried turning System Restore off. That did not fix the problem. So I turned it back on. Now I am trying to "scrub" the system so that I can initialize a new System Restore Point and get on with life. But I would prefer not reinstalling everything which would take over a week.
When I use the system protection option, the "search for restore points option'hangs. The create system restore point button is grayed out. Automatic updates and those installs using Wise Installer stall and do not complete.Apparently something has locked the function. If you have a clue as to how to untie this knot.
my sisters HijackThis log >O10- Broken Internet access because of provider LSP 'c:windowssystem32wshbth.dll' missing. This appeared after she re-installed her OS. She has Vista Home Premium, SP2, IE8 and Firefox. Pretty much the same that I have but on a Dell laptop. She has no issues with her computer connecting nor running. I looked it up on SystemLookup and it is Windows Bluetooth related. See here > SystemLookup - O10 List Could someone please tell me what this refers to? There is one entry in the 04's that is related to this. See here > O4 - Global Startup: Bluetooth.lnk = ?
View 7 Replies View RelatedI am really not very good with hardware, but I want to install some new USB 3.0 ports. I have selected a card, ASUS U2S6 USB3.0/Sata3 6Gbps PCIE Card and I want to install it. I have checked my computer and I do have the required PCI-E port. That is not the problem. Just two questions:
1) This website seems to suggest that it will only work on some very selected motherboards. Asus U3S6 USB3.0 & SATA 6Gbps PCI-Express Controller Card [U3S6] Controller Cards SATA III 6Gbps
Compatible motherboards: P7P55D Deluxe, P7P55D EVO, P7P55D PRO, P7P55D, P7P55D LE, P7P55 LX However, my motherboard is not listed. I thought that PCI-E cards were just meant to be insert and install drivers. Is this not the case?
2) Also, I have noticed that this card does not require additional power. Does this mean that it might not be able to power some of the more power consuming USB gadgets that I might buy? Therefore, would this be a better choice: UNITEK 2 Port USB 3.0 PCI Express Card Reviewed.
I do have a spare Molex power cable, so that would not be a problem, though an extension would be required (again not a problem) I do like the idea of having the extra SATA3 connections (and I know that using them may slow things down) but primarily this is for my USBs, so I want proper functionality.