Un-installed Its Own Speakers?
Dec 26, 2008
Im not sure if I should put this under update probelms or what, but Im highly confused. I downloaded the Malicious Software Removal Tool, thru Windows Update. (Not a pop up online) After it was done with the update, it restarted my computer, and when it was done, I discovered that it had UN INTSALLED the speakers. The new software hadnt even run yet, so I doubt it had anything to do with that. When I click on the volume icon on my task bar, it says that there is "No Audio Output Device Installed"
View 9 Replies
ADVERTISEMENT
Nov 30, 2009
I just upgraded my Lenovo Z60m last night to Windows Vista Ultimate 32-bit and now i can't get any sound out whatsoever. Ive tried attaching headphones and stuff but none of them work. im pretty sure its probably my driver problem but i have no idea how to check what my sound card is. ive already tried realtek and soundmax but none of them work! Anyone has an idea where and how to check my soundcard and how to solve this problem?
View 5 Replies
View Related
Mar 27, 2009
I bought a set of speakers for my laptop and in the process of trying to get them to work I seem to have somehow disabled my internal speaker. Now my computer keeps telling me that I have no audio output device installed. I'm not sure how to get things working again - either the newly purchased external speakers or the internal one which has worked just fine up until now.
View 5 Replies
View Related
Mar 30, 2008
My vista keeps locking up after various amounts of time, no matter whether its just idling, or im making the computer work hard. As ive read on other topics, I think its a driver issue, but I just dont know what to do. I will try another fresh vista install tomorrow and get the vista updates quickly to see whether that helps the situation. I have ensured it isnt overheating like it did initially when I bought the system, and it is now a safe and low temperature in a running state. Also, it only detects 3.5Gb of the 4Gb of RAM I have in my system. PC Spec:
Ive re-installed, windows, and it froze after I installed the chipset driver. I contiuned, and found a sound driver wasnt digitally signed. However it still crashes. I have got the latest drivers for it. For it to crash, all i did was open recycle bin, from idle state.
View 9 Replies
View Related
Mar 23, 2008
I shouldn't be surprised but here goes....I checked today for SP1 on windows update.. According to my computer no updates available however updates were last installed on 03/13/08 and yet when you look at installed updates it shows a windows defender update installed today. I have been reading several posts on this problem and have noticed that Carey Frisch posted a link to troubleshoot and now here is a problem and that is none of these apply to me... Once again Go figure!! Running Vista Business 32bit here in the good old USA and of course the English versionVista is and has always been updated right on schedule....
View 9 Replies
View Related
Jun 29, 2009
let me start this nightmare story i had just done a fresh restalled and spent hours on getting everything installed on pc all was fine working perfectly untill that is i installed vista service pack 1 from windows updates the update process crashed halfway through so i had the only option to restart my pc then came the blue screen of death and it metioned if you have any new hardware installed make sure all drivers are installed etc etc of course i know it wasnt hardware it was because of me restating my pc half way threw the service pack 1 and the full files not been installed threw the update process crashed was the reason for the blue screen but the blue screen had notes advising me to clear shadow memory in the bois and any other memory so i stupidly assumed this was channel mapping and bank mapping and put them all to zero please see jpeg of what i changed i basically disabled everything that was enabled and put all the mapping channels and bank channels to zero and now when i switch on my laptop i get a blank screen with no post no ...........
View 9 Replies
View Related
Nov 22, 2009
so I've been trying to trouble shoot this for awhile...I've uninstalled and installed drivers, rolled back drivers....For some reason I am not getting any sound from the rear jacks (green to monitor) or from the headphone jack. System is a HPa6303w running vista home, using realtek HD Audio. My 'digital output' is set as my default playback, but when I used an RCA cord to 3.5m plug I still have no sound. I can't configure the speakers cause the system is not seeing them...is there any way to 'activate' the analog playback?
View 9 Replies
View Related
Jul 24, 2009
I recently switched from XP x64 to Vista x64, and my speakers (nor headset and mic) no longer work correctly on this computer. I've tried uninstalling, reinstalling,updating, and changing all the settings multiple times, but I couldn't get them to work correctly.
The only time I can get my speakers (and headset) to make any sound at all is by plugging the speakers into the "Center/Subwoofer Speaker Out" plug. However, they play only as the center(left) and subwoofer(right) then. (This is while the Speaker Configuration is set to "5.1 Speaker", and I only have 2 speakers and 1 subwoofer.)I can't seem to get any sound out of the "Front Speaker Out" (green plug).I'm using 2 left/right speakers that connect into a subwoofer, which uses only 1 plug into the computer.I was able to get both speakers and headset to work at the same time when using XP x64 and Windows7, but nothing works in Vista. (I cannot recall if I was using the "Front Speaker Out" plug when they were working, but I have tried all other plugs in Vista.
View 9 Replies
View Related
Aug 18, 2008
I just bought my new Creative T7900 speakers which is 7.1. I have DP35DP Media series board with a built-in 7.1 sound card that has a driver from SigmaTel (default). The problem is I can't use my 7.1 speakers. The only speakers working are the two front speakers and the subwoofer when I play Windows Media Player 11 and Windows Media Classic Player, but when I ran a test on the config settings of SigmaTel, this time 5.1 speakers worked (excluding the side pair speakers). That I discovered, the audio cable that was included in the T7900 package is for 5.1 speakers only. One end of the cable has 3 pins and the other end has 4 pins which is standard for 7.1 speakers (Black for rear speakers; Lime-green for front speakers; Grey for side speakers; Orange for center speaker/subwoofer). But when I checked the quick installation manual, the cable included with the package is correct (3-pins : 4-pins). I only want simple thing to happen. I want my T7900 work on my PC that has built-in 7.1 sound card.
View 6 Replies
View Related
Aug 7, 2009
I do a re-install of vista OS. It's been like this everytime I do a format and re-install Vista. I managed to get sound through the speakers again by doing many removal of the different drivers/codecs but now I just cannot get it to sound through the speakers. I get sound all the time through the headphones jack but it is a hazzle to get them through the speakers. Why is this?
View 7 Replies
View Related
Jun 18, 2009
I have a Dell XPS 435MT and am trying to find some speakers for it. I haven't had any luck on Dell's website other than some cheap $20 jobbies. I don't need 4-7 speakers with sub woofer, etc as I have all that with my older XP system but, I'd like to find some decent ones for the newer system with Vista Home Premium. Can someone steer me in the right direction for speakers for this system? They don't necessarily have to be Dell.
View 5 Replies
View Related
Mar 25, 2008
I bought a new lap top 3 months ago running VISTA home premium and everything has been great but suddenly there is no sounds from my lap top. I have realtek and device manager says all is working and everything in sound (speakers etc) is set up ok, but when I hit test button there is no sound.
View 4 Replies
View Related
Jun 12, 2008
In previous OS I've pluged in my mic and go 'test test' and I would hear myself, in real time, through the speakers. Vista does not do this apparetnly To make matters worse, the mic will not feed through the stereo mix (because it wont come through the speakers?). I definetly have all this enabled, all hidden things revealed. I've rolled back teh drivers for the sound card, updated them, updated them again, shut down, restarted, tried a million different settings and STILL no mic for stereo mix or speakers. I can see the green bars going when I speak, and it works in programs like skype.
But this stereo mix is a big problem. I similcast an internet radio and TV show. In order to broadcast the audio from the music videos I play on the TV show over the Shoutcast radio server, I need stereo mix. However, I also need full use of my mic because a tv and radio show without a mic is pretty boring. Has ANYONE found a solution to this problem or should I just downgrade to XP, which runs my audio settings without hassle. I have Vista home premium 32bit on a toshiba laptop with a realtek high def audio soundcard. I am trying to use front jack mic but there is also a built in mic.
View 4 Replies
View Related
Mar 23, 2008
I am currently using XP and I can't get my speakers to work. They are plugged in, have power, but the computer can't detect them. I don't have the install discs for either my sound card or speakers. What can I do besides get new speakers or a new sound card?
View 4 Replies
View Related
Mar 31, 2008
I recently bought usb powered speakers (Divoom Morro 220) for my laptop. My laptob is Vista home basic based (with update 1). My problem is that no speaker, (usb powered or other types of power speakers), wants to work. No sound comes through.
View 4 Replies
View Related
Mar 19, 2009
Everything is working fine except for the sound which, even though I have put it to maximum is practically inaudible. Is it possible that she needs new speakers? the ones she has look very elderly! I have checked that they are plugged in ok and enabled.
View 4 Replies
View Related
Jun 14, 2009
i recently just got vista and i've tried everything to get my speakers to work, i have updated drivers, made sure everythings enabled and asked different web sites.
the speakers are plugged into the back green hole, they work with my ipod and are being detected in control panel and device list.
the only thing i can think of is that the rear panel is not enabled some how, does anyone know how to enable it manually?
View 9 Replies
View Related
Sep 20, 2009
I have Logitech X-530 speakers, a 5.1 setup. Yesterday I wanted to use my headset to play a game, so I had to change my settings to stereo to get the sound out of both the left and right headphones. When I had finished, I changed it back to 5.1 through the control panel, but now the sound is only playing out of the left and right speakers. All speakers are functional, since when I test it through the control panel the 'bing' sound plays through all one-by-one. The speakers worked fully in 5.1 before I changed the settings. Windows Vista 32bit SP2.
View 9 Replies
View Related
Jun 2, 2008
When i plug my headphones in i hear static, you can not notice it once the music is playing, but it gets really annoying really fast. I dont know what to do. I have my speakers hooked up to a Turtle Beach Montego DDL. I couldnt find any X64 bit drivers for this card, so i figured there had to be other drivers that had the same chipset......I was right. So i have different drivers for the card.
View 9 Replies
View Related
Mar 29, 2009
I've got an Asus G1Sn laptop. My laptop speakers do not work in windows, they work post bios screen but no where after windows loading. If i plug in speakers/headphones to the audio out they work.
View 7 Replies
View Related
Apr 7, 2009
i have a common problem of my 5.1 logitech speakers not working on vista, like most ppl, wen i test them on realtek hd, they all seem to work fine, but wen i go to play music , movies ect.. they seem not to work at all, i can onli get 2.1 spekers working not the the full 5.1, ive done everything, filling in speaker fill ect..and have also been on a million forums to find a soultion.. but there is too much jargon that i dont undertsand.
View 8 Replies
View Related
Mar 27, 2008
I like to use speakers for listening to music/radio and I like to use headphones when playing games (TF2, Counterstrike, etc). It would be really nice if I could swap between the two easily, but I can't seem to sort this out. Before I moved to Vista I could get a signal to both my speakers and headphones at the same time. However, when I upgraded to Vista x64 I also upgraded my motherboard (to a GA-P35C-DS3R) and it now provides Realtek HD audio. However it seems my case only supports AC97.
What I would like is either:
1. A physical switch to switch between them (preferred)
2. Both playing audio at the same time
I want to buy some Creative Gigaworks T40s to replace my old speakers. Also my old headphones have recently broken so I need to buy new ones. I am looking at some decent gaming headphones - either Medusa 5.1 ProGamer or maybe Sennheiser PC161. (Any better suggestions?). However, the switching thing is the real problem. Considering I am shelling out for new headphones and speakers I don't want to spent a huge amount beyond this - maybe another £50.
View 7 Replies
View Related
Apr 14, 2009
i can here music and all that but my friend had his computer so he could sing threw his mic and u would here him i want it that way on my pc all the site i looked at show another thing so idk wut to do.
View 5 Replies
View Related
Sep 3, 2008
The other day my speakers (Logitech X-540) stopped working all together. They pop when I shut down and reboot, but in the speaker properties they are listed as unplugged. The Realtek HD control panel gives me an error saying that I'm using Vista drivers and to download the proper ones. I've downloaded the current drivers from Realtek (r2.02) and from Gigabyte and neither work. Is my next step getting a new soundcard for further troubleshooting or is there something I'm overlooking? And yes, I have checked to see that the speakers are actually connected to the PC
View 6 Replies
View Related
Feb 8, 2010
I accidentally disabled my speakers and headphones in Vista Home Premium. I tried to enable them, they aren't even listed in sound devices. I'm on a HP G60 laptop. I went to control panel, clicked on sounds. Then i got a window with 3 tabs but no speakers or headphones anywhere. The volume icon says there's no sound device installed. I'm about to freak out!
View 4 Replies
View Related
Dec 27, 2007
My mother board is an abit IP35 Pro. And for speakers I have Creative Inspire P7800. Coming out of the sub are all the outputs for center, sub, left & right (front, side and rear). The output cords that came with the speakers don't fully match the input for the onboard sound card. I really don't want to spend $70+ on a sound card. Seems the onboad sound is rather descent. Sound I spend the $20-30 to get the cords that are missing. Seems that cords supplied with the speakers have 4 leads coming out of the sub and then they combine something into 3 leads going into the sound card. Now when I go to mess around with the sound within windows I can't get anything to be produced out of the side speakers.
View 4 Replies
View Related
Feb 4, 2008
what would you recommend me to buy? I really need some good ones, but not that expensive!
View 4 Replies
View Related
Mar 9, 2008
I'm running Vista Ultimate and I recently dicarded my dell speakers that came with my xps 400 b/c only the back ones worked and those cables were too long to use efficently (I don't need help on how to arrange my speakers, thats OK). The real problem is that my Sony MDR-E828 headphones won't work with the computer/the computer dosn't recognize them (so essentially I have no sound, other than the beeps that come out of the PC itself). Before I uninstalled the other speakers (after I had disconected them), the headphones only worked for the sound config (wher the CPU makes sound come out of the different speakers to identify them). Now, I can't get to any mixer or any thing else (sound test, ect.) b/c no speakers are installed, and when I plug the headphones in, all I get is static. I went to the Sony Tech support and there are no downloads for the headphones. I'm completely lost and soundless.
View 4 Replies
View Related
Mar 23, 2008
some stage over the last week the sound of my PC has been set very low and I cannot find a way to increase it again. I have disconnected the speakers and connected tem to my Ipod and they work a treat. Volume in System tray is on full, so is it in the "Spealers/ Headphone Properties". The vertical bar on the right shows that the System recognises the volume, i.e. the equaliser keps jumping! I can hear something when I turn up the volume on my speakers but the music is only slightly louder than the white noise! The problem occurs with mp3s, films, CDs and DVDs. Does anybody knwo what the problem could be and how to solve it?
View 4 Replies
View Related
Feb 22, 2009
I lost sound to my pc a while back. Finally had time to sort it out. It was showing realteck speakers not plugged in - they are within the pc, so I tried unplugging things and rebooting to no effect. I then tried disabling and restarting, only problem is I can't work out how to enable them. The files are there, but when I go into control panel sound and manage audio devices it says there aren't any.
View 9 Replies
View Related
Sep 27, 2009
I have no sound coming from my speakers. I don't know of any specific trigger. A friend ejected my iPod and walked off with it, but that's the only action I can think of done on the computer for a while. Looking in the IDT Audio panel it says the following:
With no headphones in - it shows that I have a pair plugged in my middle jack.
With headphones on the left (mic) jack - it shows a mic plugged in and nothing else
With headphones in the middle - it shows both headphone jacks as filled (the one on the right shows up as filled too)
With headphones on the right - it shows both headphone jacks as filled (the one on the right shows up as filled too)........
View 6 Replies
View Related
