I know you guys get this question alot, but after searching through the forum posts and trying the various methods, still this obstacle remains. Ok, I just bought a Gateway E-155 tablet online and it came with Vista Ultimate 32 & 64bit versions. The person who I purchased it from said it was already installed and ready to go. When I received the laptop today, I turned it on and it said no OS installed.
I went through the procedures and arrived at the 'where do you want to install Windows' part of installation which, of course, had no HD to choose from. After researching the topic it seems that this is a common problem. I decided to go to Gateway.com and downloaded all the drivers and unzipped them and put them onto a USB drive and still it said 'no drivers found'. Then I found a post that suggested going to Intel and obtaining the SATA/RAID driver. After putting that onto the USB, tried it again and it finally found a file (ICH7M/MDH SATA AHCI Controller) but after it attempted to use it, said that still no driver was found.
One person suggested going into the BIOS and turning the 'RAID' on, but I saw nothing of it on the SATA settings and so I adjusted those settings, each one followed by reattempting to find the drivers. nothing.
I have ordered a bunch of pc parts. I am positive that they are all compatible. They are all vista 64 compatible. I have already gotten all the necessary drivers from the manufacturers' websites. I have never loaded vista on a machine. So, having said that, here are my questions. After I put it all together, What do I need to do before I load vista64? I have 2 sata HDDs but I am not going to use RAID. Will I need to install raid/sata drivers with F6 during the installation? I am listing the main bits of the machine below. Will Vista's default drivers be enough for me to get going so I can use the drivers that I got from the manufacturers?
I have vista business 64bit installed on my 8 core mac pro and I have the ATTO ul5d installed. I also have Mac OS installed on another internal drive and that is what I am most familiar with. I have no prior experience with windows or PS's. On the Mac OS side I have 6 15k scsi drives in and external case and they are striped in a raid 0 using softraid. I know that I can not use softraid or even use those drives in vista. But I also have another 6 drives in another case that I would like to stripe in a raid 0 and use them in vista, for photoshop scratch. Is there any raid 0 software for vista?
I've created RAID-0 volume containing 2x150Gb WD VelociRaptor HDDs. Before copying files windows sees it as one volume (279Gb). I partitioned it as single volume and formatted it. But when i proceed further to copying files stage it displays the error "Windows could not determine if this computer contains a valid system volume" I have tried uploading RAID drivers. Didn't work. Same error.
Question: I've never never installed SATA drives, I know that when I connect them up and try to run Windows Vista Ultimate 64bit, it will ask me if I need to install SATA drivers (which I have from the Intel CD) but.... what then happens?
1. I only have one DVD drive so do I then take out the windows CD and insert the Intel driver CD or do I put the drivers on a USB stick or something?
2. How do I format the disks and is it straight forward to set up the RAID array?
Would someone know of any utility or method to restore a SATA hard drive's factory full capacity size? During partitioning my drive, it went from 595GB (640GB Drive) to only 32GB. Since it is a 64-Bit system, I can't find a utility to restore the drive's full capacity.
I need to know what would be the best optition for top performance.
Raid Settings
RAID 0
128KB Strip
It said in raid settings this is for top performance. 64KB for the other not sure what it was. Also should i remove the RAID and then do a full format then low level or just leave the RAID as it is. And what should i make it RAID 0 RAID 1 or RAID 5 for performance. I'm a gamer.
I have a 750 GB sata 3.0 HDD which i'm trying to connect to a sata RAID card or motherboard. I've connected my hard drive using an sata cable to both my motherboard and my raid card. When i try either this prevents windows froms starting. The motherboard sata is 3.0gb/s, the raid card is 1.5gb/s. I've tried all jumper settings and made sure all cables are working. I have another sata drive that works with everything. The hdd that works is a samsung, the hdd that doesn't is a western digital recertified.
I have an sata enclosure which has its own powersupply and a sata to esata cable. My hdd above only works when i put the hdd in the enclosure and connect the sata to esata to the motherboard. The enclosure does not work with the raid card.
I am about to set up a new PC with 2 320G Sata drives and a Sata DVD drive. I will be using a Gigabyte GA-X38-DQ6 motherboard. Am I going to have a problem with the Sata DVD?
I thought I had been able to make a backup of a Vista Ultimate System on a Raid0 array (C: partition using the standalone Acronis True Image 10 boot disk) and copy it back to a non-Raid disk. For some reason Vista will not boot correctly and the Vista boot disk Repair Option thinks about it for 5 minutes or so and then says it can't fix the problem. I know I have done this trick with WinXP and I thought I had done it with Vista. I know I can do the save/restore routine (Raid0 to Raid0) with the Acronis standalone software. what I have to do to get a Raid0 version of Vista Ultimate transferred to a non-Raid disk using all the same hardware.
I have the Vista Ultimate System on a network so I can backup to a different controller and hard drive, delete the array, reformat using Partition Magic 8.0 and restore. The only reason I am trying to do this trick is because the SATA controller on the motherboard does not support Raid Arrays and SATA DVD Drives together...and...I want to install multiple SATA DVD Drives on this system.
I purchased a digital update of Windows Vista Premium upgrade and the download won't load. I am useing a trial version of Windows XP 64-bit. I first used the digital locker a few times and it would stop at 99 percent and give a validation error. I figured it the locker was having a problem so i manual downloaded the three files through my internet browser. They downloaded fine without problems, but when I tried to run the Vista setup I ran into another error: 0x8007000D Windows was unable to create a required installation folder.
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
I'm have a couple of problems and I was hoping someone here could help with the solutions.
I wanted to use a raid setup with vista ultimate x64. But I had problems with my raid bios. I went ahead and installed and activated vista any way in a non raid configuration. Now that I have my raid bios issues fixed I would like to setup my raid array. The problems and questions I have are:
1. I didn't realize it but I left the bios setting for my sata set to raid. I don't have the raid set up just the setting at raid. When I change it to ahci vista won't startup and my machine reboots. If I don't want to or can't do the raid array how do I fix this? Since I've already activated vista can I reinstall it? I believe I did install the raid driver at install time.
2. If I do want to do the raid array can I do that with vista already installed on one of the drives?
I'm currently running a non-RAID setup but for convenience would like to set up a RAID 1. My C: drive is 1TB and it contains my OS and all my media files. Currently I manually back up my music and video files on a couple other dissimilar sized hard drives. Since I get new music and movies fairly frequently, the backup process is fairly tedious so I thought RAID 1 would be useful. If I went to RAID 1 could I simply add another 1TB HD and would all my data automatically copy? Or would I basically have to back up all my data from the 1TB drive, reformat, add the new drive, and perform a fresh Vista install with RAID 1 enabled, then copy everything from the backup drives to the RAID 1 array?
I have a set up with RAID 0. I want to install Ubuntu on an external drive. I have read a post in the Ubuntu forums about disconnecting all internal hard drives and only using the attached external drive to install the OS. My question is if I disconnect the RAID-ed drives, will the RAID remain intact after the external drive OS install and the reconnection of the RAID-ed drives? Or will I damage the RAID and have to reinstall my Windows OS?
System specs: ASUS M2A-VM mobo, Athlon 64x2 5400, ATI RAID utility, Vista Home Premium x64, Catalyst 8.9
I don't kno all that much about HD drives and RAID.. I'm not sure what to do here, but I have my main HD in my new system.. it's a 500GB Seagate Cuda the 32mb Cache 7200.(11) version.. it's a pretty good HD I've read. and currently just plugged in.. no special way or RAID setting or anything. I also have my old computers 250GB HD in here. I moved everything over from my old PC.. and just been lazy and have not taken the 250GB out.. well now I'm going to take it out.. and sell that computer... and from a freind I'm getting a deal on a 250GB HD..
So my question is what can I do with it.. What advantages can I get with using RAID 0 or 1 or whatever. it's a 250GB Spinpoint Drive. I don't kno what RAIDS all about.. how much performance will I gain with it.. whats the best way to hook it all up? I want to have my stuff backed up.. not everything. but the important stuff thats on my 500 I want to have on this new 250 I'm getting.
My pc was configured in raid5 but I lost all the data. Since then I decided to go back to the classic drive C,D,E each by themselves. The point is that things are going slow / sometimes I try to access drive D with music and there is a significant latency in the hdd response. I can even hear the sleepy drive waking up. I might want to aim to high but here is what I dream to do.
1. I want to go back to a raid configuration in which all those hdd(i have 3x 500 sata) to work hard for me. 2. Find a way to add the fourth one in which to save important data. I case of crash to reinstall vista and all the soft without losing all my projects. I am doing video editing.
My motherboard has a sata external connector. What would you guys do with this configuration in order to set up a raid. Don t tell me trash it 'cause i won t. I paid more than 4000 bucks last year. Today might value less than 2000 ( hurts so bad). This is another reason I want to squeeze as much as possible from what I have.......
what exactly is RAID MODE. i mean i have seen it in my BIOS and all. can u guys check my HDD and see if it supports a RAID SETUP. i heard you can get better ratings with RAID. right now it is just hooked up via sata cable. Newegg.com - Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
I installed Vista recently doing a fresh install. When i did it, it only had 1 drive visible when i have 2 of the same drives. In my bios i do not have the drives turned on to RAID i just have them in their naitive modes. I installed Vista and now it set up a RAID 1 all by itself. Has my C Drive as MIRROR[0][2] SCSI Disk Device. Now i want to stop this so i can use the other drive. Can i do this with out a reinstall? Or what would happen if i whipped on drive then plugged it back in , would this clear the other as well?
Made image of disk using Macrium Reflect Restart and setup Raid in Bios, then using ctrl-i, use Intel Matrix Storage RAID to make Raid0. Then using Reflect I restore the image. But when I then reboot I get a very fast BSOD and Vista won't boot. In safe mode it seems to lock when loading crcdisk.sys. After doing alot of research it seems that I may need Raid drivers. So question is how can I instal the Raid drivers without losing all my data? I don't want to reinstall windows.
Managed to kill my raid 0, 1 terabyte games drive today. Absolutely shattered. Maybe ten hours worth of installs on that drive. To say that I am upset is an understatement. You live and learn. Will be purchasing an extra backup drive exclusively for backing up this drive. Never will I feel this pain again
I recently purchased a HP Pavilion M8430F - It came with a single 750 Gig drive and has Vista x64 installed, - I added a second 320 Gig Drive that had data only on it - Recently i have saved all that data to the Vista drive now i would like to install XP Pro on the smaller drive and dual boot them both - OK Vista runs fine XP install Crashes - my onboard Sata Controler is set to Raid that is the only way vista will boot - if i switch it to IDE i can install and run XP but like i said vista will not boot-up switch it back to raid and Vista will boot XP will give a blue screen - The pc came with a single drive and the default setting in the bios is RAID
Noob person needs help setting up RAID 1. I have the following hardware and I would like some help in turning this into a RAID 1 storage vault. Two (2) Western Digital Caviar Green 1TB 32MB HD (WD10EADS) Vantec NexStar MX (NST-400MX-SR),Switching Jumper 1&2 are ON,Switching Jumper 3&4 are OFF, At the moment, both drives are up and running.
Shortly after installing Vista SP1 I have started to get message "a drive in Raid 0 is failing". This sounds bad. I have tried running checkdisk on my hard drive but it does not show any problems. If I reinstall the OS from scratch, will it fix the problem? Or is this a hardware problem?
I posted in another thread with a similar topic. In that thread i got my SATA drives setup in a RAID 0 configuration. Now i would like to setup my 3 IDE drives the same way. I am using a VIA software RAID utility for my SATA's. I have no idea where to start. I searched the internet and it seems most of this is only done with Linux boxes. Can anyone point me to a tutorial on how to setup an IDE RAID 0, Right now in my BIOS i have the SATA ports set to RAID and not IDE, will this make a difference? I have 2 drives on one IDE bus and 1 plus my dvd drive on another IDE bus. Both buses connect to my motherboard. How can i get my IDE drives to show up in my VIA RAID utility?
