System Restore Stopped Working 0x81000202
Jan 6, 2009
I have a laptop with Vista Home Premium a couple years old but all up to date and everything. It was working fine, but I was messing around in the startup menu tonight and accidently cleared the wrong box. To make a long story short, after the machine restarted, nothing worked. I can't access system restore to fix it because it tells me that system restore isn't working, and that the volume shadow copy service isn't working. The error code on that is 0x81000202. Also the event log isn't working, apparently Windows Explorer isn't working, so much isn't working, and it won't connect to the wireless router so I've lost the Internet connection. I don't even know enough about the problem to say what exactly isn't working, but the machine is useless now. I've run every internal diagnostic I can find and the memory is fine, but something critical obviously stopped running when I cleared that box. I can't access the startup menu to reconfigure it either. Does anybody have any clues as to what I've done and how to fix it short of doing a clean install of the operating system?
View 4 Replies
ADVERTISEMENT
May 3, 2009
Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies
View Related
Apr 19, 2008
System Restore is unable to restore on a 4 month old Vista machine. After rebooting and logging in message says (System restore unable to restore your files due to an unknown error). The reason I was trying to restore is the wife was unable to access many programs on her login. When you clicked the start button on her login the program files were empty and we were prompted to do system restore. Everything was fine on my login and we are both set up as administrators. I also tried system restore from the start repair boot process same thing. Reading other posts I do not use norton antivirus but avast's free one. The restore option worked fine a couple weeks ago when a software install caused me issues
View 6 Replies
View Related
Apr 29, 2008
running Vista Home Premium (32-bit). When you log into Windows, you immediately get the error "Windows Explorer has stopped working". Then it says explorer is restarting, restarts your desktop, then is ok for about 3 seconds. The error then pops back up and it is stuck in that loop.
It started when he clicked on some popup he shouldn't have. I removed a trojan identified by Mcafee as exploit-byte verify. I have also disabled all startup programs and services (except windows services) through msconfig. However, I am still getting this error popup. Unfortunately, he had previously turned off the system restore option and got rid of the recovery partition.
View 7 Replies
View Related
Sep 7, 2009
I am using firefox and up until yesterday my backup and restore always worked perfectly. Now it refuses to backup and has erased all restore points, saying I have error 0x81000202, which means my volume shadow copy doesn't work.
View 4 Replies
View Related
May 28, 2009
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies
View Related
Apr 11, 2008
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies
View Related
Jun 5, 2008
This message keeps on popping up after trying to install adobe 8 and getting a blue screen in the middle of the installation. Can't get rid of the message window even after uninstalling adobe!
View 5 Replies
View Related
Feb 26, 2009
I've been using my Gateway M-1617 laptop fine lately, but now all of a sudden I'm getting these errors anytime I run any .exe files. I have also found this to be true when trying to install anything.. I suspected it to being the DEP [Data Execution Prevention] service, but I'm not too sure..
Here's a sample from a random program..
Problem signature:
Problem Event Name: APPCRASH
Application Name: 1ClickBoot.exe
Application Version: 0.0.0.0
Application Timestamp: 498a1398
Fault Module Name: 1ClickBoot.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 498a1398
Exception Code: c0000005
Exception Offset: 0000701d
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 60ea
Additional Information 2: de1a0c9f286b0048ff42d7022072927e
Additional Information 3: 4db7
Additional Information 4: 3de5c6941e887c6b1d1917896503bbb6
Read our privacy statement:
Microsoft Online Crash Analysis
View 4 Replies
View Related
Feb 16, 2010
I am getting a message saying that the spooler subsystem has stopped working and closed. I have tried manually restarting the spooler but I then get a interactive services message, saying that there is a message that cannot be viewed in windows, I click the view message button and I get a blue screen with a black window then I am told the it does not need to show me the message.
I am running Vista SP2 64bit
AMD athlon 64X2 Dual core processor 6400+ 3.20GHz with 4.00Gb RAM
View 9 Replies
View Related
Feb 6, 2009
Just bought a new computer (Alienware M17 with 64 bit windows vista ultimate) and installed the drivers for my Dell 924 all in one via a Dell 3300 wireless printer adapter. The printer is working fine with my new computer - however after I installed the printer the following message pops up about every 15 minutes:
Printer communication system has stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available. Sometimes an additional prompt appears to submit the problem to Microsoft =96 however Windows has yet to find a solution to the problem. The only printers I have installed on my system are my =93Dell Photo AIO Printer 924=94 and the default =93Microsoft XPS Document Writer.=94 I=92ve never seen this issue with any of the other computers that use this printer running 32 bit versions of vista.
View 8 Replies
View Related
Apr 4, 2009
I just recently installed a little hacking tool for a game I play, and I guess my ad-aware detected a trojan. downloader and now my computer is acting extremely weird, I tried doing a system restore to rollback to yesterday and now it's not working, just asks me to close the program. I tried it in safe mode and it gave me the same error message.
View 4 Replies
View Related
Oct 19, 2009
I have a one week old HP with Vista Premium x64. I have not made the system restore disks yet. Been busy sorting out software problems I have the following problems: Control panel will not open on the start menu or through explorer when I click on it. The subdirectories will open when I click on the carrot on the left of control panel in explorer.FreeCell.exe will not run.System restore will not find a restore point. It is not working properly. " The volume shadow service used by system restore is not working. For more information view the event log.(0x81000202) All the other software I have check is operating. Firefox is a little balky even without addins.
View 4 Replies
View Related
May 29, 2008
I have discovered my Vista (Home Premium) system restore isn't working.
After a fresh boot, when I try to open "system restore" from the start
menu... my computer seems to go nowhere. Nothing appears to happen. If I
do it a second (and on) time, I get a message that says "system restore
wizard is already running", when in fact it is not (per task manager).
Also, about an hour after the FIRST attempt to open system restore... I get a
screen that sais "no restore points have been created on your computer's
system disk..."
If I go to System Properties - System Protection tab to see if I can create
a restore point... I get a continuous "searching" in the Automatic Restore
Points section, and the "create" button is not available (not highlighted).
The "system restore" button is also unavailable (not highlighted).
View 9 Replies
View Related
May 6, 2008
My husband did something to the sound card or the program that creates sound on my computer. The computer thinks it no longer has a sound device. I wanted to restore to the point before he did this but it was a few months ago. When i try to do a system restore to that date it wont let me go back that far. I am not sure how to do this? Is there a way to restore windows to the orignal? I bought the computer with windows vista on it so i do not have a backup disk for windows it jsut came with it, but is there a way i can still re-install it.
View 5 Replies
View Related
Mar 23, 2008
My system restore is not working I get the error 0x800423308 which i find nothing on when searching.
View 4 Replies
View Related
Jun 13, 2009
I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?
View 4 Replies
View Related
May 26, 2008
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies
View Related
Jul 25, 2008
Lately when I've tried looking at different folders and files on my hard drives I keep getting "Windows Explorer has stopped working and will restart." It's driving me nuts, I can barely do anything.
Also, same thing with Internet Explorer...I'm getting real sick of Vista's shoddiness..
View 9 Replies
View Related
May 11, 2009
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies
View Related
Jul 6, 2008
By now it should be obvious that, under the Vista operating system, I have Home Premium, there is a severe overall, general "has stopped working" problem.
Thus far I've experienced:
"Internet Explorer has stopped working"
"Windows Explorer has stopped working"
"Word has stopped working"
"Sherlock Holmes Nemesis (Adventure Company) has stopped working"
"Outlook has stopped working"
"Acid 4.0 (Sony) has stopped working"
"Acid 6.0 (Sony) has stopped working"
"Sound Forge (Sony) has stopped working"
Is it not obvious by now that Vista has a problem, maybe a compatability problem, with everything from Internet Explorer and Microsoft Word to third party programs which cause programs, as I mentioned, even programs made by Microsoft, to "stop working"? Is there no an overall "stopped working" patch or something that Microsoft has released by now?...............
View 9 Replies
View Related
Feb 10, 2009
All of a sudden some of my programs stopped working, for example catalyst control center is supposed to start as soon as vista starts, but now it gives me an error like:
"CCC.exe has stopped working"
Same with some others...
Yes i ran AVG, i ran malware, and superantispyware, none of them finds anything.
I cant even load daemon tools now, it gives me some error: "Engine loading was failed", cant uninstall it, it gives me another error, and some of the programs like netlimiter if i start them from my objectdock dock they automaticly stop working, only when i start them from the normal .exe they dont crash.
View 9 Replies
View Related
Mar 23, 2010
I am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies
View Related
Oct 26, 2008
I wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
View 8 Replies
View Related
May 28, 2008
I have successfully used my Vista installation DVD to backup and restore Complete PC many times. But yesterday, it suddenly stopped booting and no longer prompts me to "Press any key to boot Vista from the installation CD/DVD". Other computers boot fine from this DVD, so it's not faulty. The only changes to the system configuration since the last successful boot from the DVD (literally the night before):
1. Automatic Security Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB936181)
2. Automatic Update for Windows Vista (KB947562)
3. Changed location of Documents, Videos, Music, Pictures to USB HDD, and then reverted back to defaults.
View 6 Replies
View Related
Jul 29, 2009
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies
View Related
Apr 25, 2008
I am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
View 4 Replies
View Related
Aug 28, 2008
I've been facing issues with backup / restore / system restore
View 7 Replies
View Related
Jun 19, 2009
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies
View Related
May 13, 2008
I'm using Vista Home Premium, which has stopped creating restore points automatically. The automatic function is enabled, and there are only two restore points in there now, so there should be plenty of space. Used to create one about once a day, but just stopped. Hasn't created one in two weeks now. Anyone know why this is?
View 7 Replies
View Related
Apr 13, 2008
Trying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies
View Related
