System Restore Cant Working Properly
May 6, 2008
My husband did something to the sound card or the program that creates sound on my computer. The computer thinks it no longer has a sound device. I wanted to restore to the point before he did this but it was a few months ago. When i try to do a system restore to that date it wont let me go back that far. I am not sure how to do this? Is there a way to restore windows to the orignal? I bought the computer with windows vista on it so i do not have a backup disk for windows it jsut came with it, but is there a way i can still re-install it.
View 5 Replies
ADVERTISEMENT
Apr 11, 2008
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies
View Related
Aug 22, 2009
Vista Home Premium, SP2. Starting a week or two, I've encountered some problems that I've been unable to resolve.
1. Background: Computer goes to sleep after two hours of non-use, and this has worked correctly for well over a year.
2. Computer is set to wake up at 0200 for daily backup, as a Task; this, too, has worked well.
3. Recently, I started finding that, around 0400/0500, when I would get up, and I would press a mouse key to reawaken the computer, both the computer and the monitor would wake up, but the machine would be locked up. I found that I could hold down the power key for about eight seconds, turn it back on, and when I would get the normal black & white screen about choices, if I chose "start normally," all was well.
3a. A thread here about a clock updating site not working led me to change from that site to NIST, and the problem went away for a few days.
4. Then, I started finding that pressing the mouse key would wake up the computer and the monitor, but I would then get the cursor and the "busy circle" on the screen, with the computer locked up. if I repeated the power-key/start-normally process, all was well. I filed a support ticket with Logitech, and got a reply. I updated the ticket two days ago, have not heard from them as to further suggestions.
5. I have also found that if, instead of using a mouse key, I would press on the Enter key, computer and monitor would start and all was okay....
View 4 Replies
View Related
Jan 18, 2009
I got a refurbished system from HP 4 months ago for $370. It has good specs. WD 500 GB hard drive, 4 GB RAM, Phenom X3 CPU. I have read that the CPU (an X3 8400) has some "stepping" issues which I may never notice. I was expecting to have some issues with it and get to know troubleshooting and fully expected to invest some time and upgrades into it. It came with Vista x64. I have had almost no issues. Even my older hardware works fine. It seems to me like Vista is rock solid. I have learned a lot from you guys in the forum so thanks. I know you normally get what you pay for but... Has anybody else gone the "inexpensive" route and had it work out?
View 4 Replies
View Related
May 3, 2009
Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies
View Related
Apr 4, 2009
I just recently installed a little hacking tool for a game I play, and I guess my ad-aware detected a trojan. downloader and now my computer is acting extremely weird, I tried doing a system restore to rollback to yesterday and now it's not working, just asks me to close the program. I tried it in safe mode and it gave me the same error message.
View 4 Replies
View Related
Oct 19, 2009
I have a one week old HP with Vista Premium x64. I have not made the system restore disks yet. Been busy sorting out software problems I have the following problems: Control panel will not open on the start menu or through explorer when I click on it. The subdirectories will open when I click on the carrot on the left of control panel in explorer.FreeCell.exe will not run.System restore will not find a restore point. It is not working properly. " The volume shadow service used by system restore is not working. For more information view the event log.(0x81000202) All the other software I have check is operating. Firefox is a little balky even without addins.
View 4 Replies
View Related
May 29, 2008
I have discovered my Vista (Home Premium) system restore isn't working.
After a fresh boot, when I try to open "system restore" from the start
menu... my computer seems to go nowhere. Nothing appears to happen. If I
do it a second (and on) time, I get a message that says "system restore
wizard is already running", when in fact it is not (per task manager).
Also, about an hour after the FIRST attempt to open system restore... I get a
screen that sais "no restore points have been created on your computer's
system disk..."
If I go to System Properties - System Protection tab to see if I can create
a restore point... I get a continuous "searching" in the Automatic Restore
Points section, and the "create" button is not available (not highlighted).
The "system restore" button is also unavailable (not highlighted).
View 9 Replies
View Related
Apr 19, 2008
System Restore is unable to restore on a 4 month old Vista machine. After rebooting and logging in message says (System restore unable to restore your files due to an unknown error). The reason I was trying to restore is the wife was unable to access many programs on her login. When you clicked the start button on her login the program files were empty and we were prompted to do system restore. Everything was fine on my login and we are both set up as administrators. I also tried system restore from the start repair boot process same thing. Reading other posts I do not use norton antivirus but avast's free one. The restore option worked fine a couple weeks ago when a software install caused me issues
View 6 Replies
View Related
Mar 23, 2008
My system restore is not working I get the error 0x800423308 which i find nothing on when searching.
View 4 Replies
View Related
Jan 6, 2009
I have a laptop with Vista Home Premium a couple years old but all up to date and everything. It was working fine, but I was messing around in the startup menu tonight and accidently cleared the wrong box. To make a long story short, after the machine restarted, nothing worked. I can't access system restore to fix it because it tells me that system restore isn't working, and that the volume shadow copy service isn't working. The error code on that is 0x81000202. Also the event log isn't working, apparently Windows Explorer isn't working, so much isn't working, and it won't connect to the wireless router so I've lost the Internet connection. I don't even know enough about the problem to say what exactly isn't working, but the machine is useless now. I've run every internal diagnostic I can find and the memory is fine, but something critical obviously stopped running when I cleared that box. I can't access the startup menu to reconfigure it either. Does anybody have any clues as to what I've done and how to fix it short of doing a clean install of the operating system?
View 4 Replies
View Related
Jun 13, 2009
I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?
View 4 Replies
View Related
Dec 13, 2009
I just acquired what seems to be a really old PCIe ATI card that I can't seem to install correctly. I went to the ATI support site and the drivers for the card just don't seem to work. Is there a specific order to follow when installing a GPU -- sorry, its been a while. It doesn't go into a PCI slot but its the bigger one, looks like a big ole' AGP card but it has a sticker right on the card that says PCIe. I can only find the drivers for a Radeon HD2600XT and I'm not sure if those are the correct drivers or not. When I first installed it everything went well and it installed correctly but the XP hardware wizard wasn't satisfied. So it doesn't fully install -- note, I do not have the original discs -- but just need the most up to date drivers.
View 9 Replies
View Related
Apr 29, 2008
running Vista Home Premium (32-bit). When you log into Windows, you immediately get the error "Windows Explorer has stopped working". Then it says explorer is restarting, restarts your desktop, then is ok for about 3 seconds. The error then pops back up and it is stuck in that loop.
It started when he clicked on some popup he shouldn't have. I removed a trojan identified by Mcafee as exploit-byte verify. I have also disabled all startup programs and services (except windows services) through msconfig. However, I am still getting this error popup. Unfortunately, he had previously turned off the system restore option and got rid of the recovery partition.
View 7 Replies
View Related
May 26, 2008
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies
View Related
May 28, 2009
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies
View Related
Feb 16, 2009
For some reason OneCare is not allowing me to restore to the latest backup (7 days ago). I can only select the main OneCare Backup folder, so I decided to allow this restore. It took quite a few hours and now I'm in shock! It actually restored everything from the beginning of 2008; there are thousands of files everywhere and some of my programs are not working correctly. How can I setup OneCare properly to restore to the last backup? I've spoken to Onecare support twice today. I guess my settings are messed up as well ecause we were not able to allow support to access my computer. It's wierd that at 8 a.m. both the phone agent and later the chat agent said they would send me a step-by-step 'how to' email but I've not received either of them.
View 5 Replies
View Related
May 11, 2009
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies
View Related
Mar 23, 2010
I am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies
View Related
Oct 26, 2008
I wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
View 8 Replies
View Related
Jul 29, 2009
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies
View Related
Apr 25, 2008
I am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
View 4 Replies
View Related
Aug 28, 2008
I've been facing issues with backup / restore / system restore
View 7 Replies
View Related
Jun 19, 2009
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies
View Related
Mar 21, 2009
It keeps freezing and has to be re-started using restart switch. There does not seem to be a pattern to the freezing that I can spot. It happens at least once a day, sometimes 4-5 times and the longest without was nearly 2 days (when I thought the problem had gone!). It can happen when browsing using firefox or IE. It can happen when using documents or playing PC games (A Vampyre Story and The Path) Initially after re-boot the system had to be repaired using the Vista CD but now it simply boots to option for safe mode or start windows normally. The perfromance monitor simply shows system not shut down properly,Have removed u-torrent, and peripherals except broadband connection (BTHomeHub 2) and wireless keyboard and mouse but to no avail.
I use McAfee for security and since most recent upgrade have to manually start windows defender using command prompt. BTW by freezing I mean that everything suddenly stops responding and nothing works including any key combos or mouse. Therefore can't access task manager.
View 8 Replies
View Related
Feb 6, 2009
Que tal foro, perdon por el [OT] pero me han solicitado una unidad DVD-ROM con esa caracteristica y segun busco con varios fabricantes, pues a 20x escriben pero lo mas que leen es a 16x, alguien sabe algo al respecto?
View 4 Replies
View Related
Apr 13, 2008
Trying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies
View Related
May 12, 2008
I was wondering why my new Vista system would only hold eight restore points. I recently used up that space very quickly when I instaled a bunch of my old programs that I used in XP. Turns out that my Vista restore points are about TWO GIGS EACH, compared to 200MB beach in my old XP system. By default, Vista appears to allocate a maximum size of 15% of the drive's total space for restore points. Or it might be a fixed number, I'm not sure. On my system disk, it's currently a tad over 16 gigs. That much space would've stored 80 restore points in XP! To change that space allocation requires some command line hoop jumping, rather than just moving a slider in the GUI.
View 9 Replies
View Related
Mar 23, 2008
1) System will not awaken properly from sleep mode even with Power Options set to default. Often must re-power up yet computer resumes Windows after going to on/off switch rather than moving mouse which often results in nothing happening, other than the computer stalling, or appearing to stall.
2) Also USB devices are having drivers reinstalled from awakening, printer in particular. What are best settings? For example? Device manager> USB root hub> do I set power management to allow computer to turn off this device to save power Do I check this allow box?
View 4 Replies
View Related
Jul 6, 2009
I've recently installed AoE3 on my computer and it works fine, I can start it and all that. Though then I ran into some trouble. I can't make home cities! When I click the "create-button" it freezes for a while and then I come to the menu which is supposed to let you handle your cards and all that. Though there is no city chosen, and when I try to choose one the only option I can click is create new home city. I simply don't get it. One would assume that it's something wrong with the game, and yeah. Of course there is, but I tried reinstalling it and that didn't resolve the issue..! Then I installed AoE: Asian Dynasties thinking that a later update might have a fix, but nope. Problem remains. This is really starting to get to me... I'm at a LAN and I'm the only Vista user you see, though I've had it installed on this computer before so...
View 9 Replies
View Related
Dec 4, 2008
Ive got vista ultimate 64. With a standard computer. My problem is that I cant configure my mouse buttons. After I install the latest 64bit mouse driver, and click on the mouse icon to configure the mouse buttons, an error pops up that says - 'Some mouse settings might not work until you connect a Microsoft mouse to a USB port on your computer or set up a Microsoft mouse that uses Bluetooth technology'.
The problem is that I have a microsoft mouse that is connected to a USB port. The mouse works fine on my spare XP computer so its not the mouse that's faulty. I tried separate microsoft mice - wheel mouse optical and the intellimouse optical, both by microsoft and both have same issue.
I tried different usb ports and same happens. I tried the ps2 port and same happens.
I uninstallled all mouse drivers and reinstalled but no help. Basic left and right click works but cant configure the wheel button. It was working a week ago, but I went for a holiday and when I came back it was faulty. All vista updates are installed, security is the windows firewall, AVG free antivirus, and windows defender, but none of these have been a problem before
View 9 Replies
View Related
