I regularly need to delete very large backup files or move data around my hard drive. Copying or deleting files or folders still takes and absolute age. I'm still resorting to having to reboot back into Windows XP to undertake file management. This is quite disheartening to say the least. Anyone else had a better experiences of SP1 regards this? Don't get me wrong, it hasn't made things any worse.. it's just not made things any better. Surely this is a pretty fundamental thing for an OS to be able to do.
I'm a new Vista user and I've been struggling with extremely slow file copies between my Vista 64 Home Premium SP1 system and my XP SP3 system. I've searched and searched and tried a number of suggestions in posts that I have found. None have worked. I'm running a Wireless G (54mbps) network. My Internet access from both system is very fast (FiOS 20mbps download), so no issues there.
When I say extremely slow I'm talking less than 200 KBps. I get the same slow response using Explorer and Robocopy. I have disabled autotuning and RSS with these commands.
netsh interface tcp set global rss=disabled netsh interface tcp set global autotuninglevel=disabled
Just wanted to know if anyone else is having this trouble. I have a NDAS network media player, my speed sending files to the drive are 4.1 mb/sec. Copying files from the drive to the computer is 10.1 mb/sec. I have tried every patch or fix I can find. Nothing works.
My old Windows XP PC died months ago (motherboard problems) and so I took out the hard drive (which still functions fine) and put it in my new PC, but I can't seem to copy any of my files in the My Documents folder from the old drive to my newer larger drive. I've had this drive in here for the last several months and have had no problems writing other files to this 'older' drive (250 gig Maxtor 16mb cache, 7,200RPM drive (btw it's only a year old), but when I try to copy files to another drive I get the following error message: "You'll need to provide administrator permission to copy to this file." This only happens with files that are in the My Documents folder. My current login has administrator rights, so I'm thinking some how this has something to do with this drive being from a different computer's installation of XP.
A few days ago I upgraded my system to aforementioned specs. I needed to copy data from old Seagate 80 GB IDE drive to my new 160 GB SATA drive. What was really annoying that when I tried to copy a file from IDE drive to SATA drive for example a file of 650 MB started with great copy speed but gradually slowed to a crawl and it took a long time for me to transfer data.
Vista SP1. It took over THIRTY FIVE minutes to copy 2.4 GB of files to a pen drive. Copying the same 2.4 GB of files from the pen drive to my Linux Netbook took less than FIVE minutes. Why is Vista so appallingly slow at copying?
-- Asking a question?
Tell the version of the application you are asking about, your OS, Service Pack level and the FULL contents of any error message(s).
Just wondering if anyone else is experiencing Vista's complete lack in ability to move, copy and delete files in a timely fashion? It's a well reported bug, but just wondering how many *real* Vista users see it. Basically Vista takes forever to delete large quanties of files, or even movecopy them. Aparently there is a fix on the way.
I let Vista do all it's "upgrade". I also downloaded and installed SP1. Still, Vista takes forever to delete a simple shortcut from the desktop, or to create a folder (when trying to save a file to a newly created folder). The "calculating time left" is still alive and well. Any clues, aside from throwing it out the window?
Having a new PC with Vista Business edition, 2gb ram, dual core 2mhz, I connected to my wireless LAN & found that file copy / transfers were appallingly slow. So much so that I had to use an external usb drive.
The same process is of no problem on my WinXp & Win2k PC's.
Am I missing something? other than that I dont seem to have any other performance issues (I have checked updates)
as you can see by the headline, i am having trouble with copying files to my mp3 player. I have done a search on this forum and found that someone last year had the same problem, but the problem wasn't solved for that person, so i thought to start a new thread. My problem started a couple of days ago, up until then everything was fine, i could copy files to my mp3 player with no problems, sometimes i would've got the messge 'Are you sure you want to copy this file without it's properties?', i'd press yes and it would copy the files ok. But now the same message comes up, and it doesnt copy the properties. I actually tried playing my mp3 player and it crashes (restarts), until i remove the file that doesnt have the properties. I know my drive is supposed to support NTFS, my mp3 player is fat32 format and it did copy files for me up until a few days ago.
I've been around here a couple of time in the last couple of years with my Vista machine and you all always seem to have the answers for me. So here I go again. Now I'm sure there is a simple fix for this, but I can't seem to find it. I happen to have two files now that I can NOT delete. I keep getting the message; Could not find this item. This is no longer lacated in C:UsersRoyBoyFavorites. Verify the item's location and try again................
I have a 40 GB vmware file that I am unable to copy from an XP SP3 laptop to a Vista x64 Ultimate desktop. Its a fairly new desktop, I'm copying to 2 raptor 500GB raid drives over a GB network through dlink xtreme router. I tried using resumable FTP, teracopy, and robocopy. With robocopy it stops at 79% and says "cannot copy file due to an I/O error" (same thing on attempt to resume). And teracopy was unable to resume either. Don't know where to start.
when I copy a url from a draft file storage, and enter it to create mail, and then send it, the url doesn't activate in the received version. I need to retype the url in the create mail stage in order for it to work for the recepient.
I sell a program that I wrote in Access and have had a couple customers with 64 bit versions of Windows Vista where if I send them an updated file, via email or download, it appears as though the file has copied over the old version but when they run the program it is still the old version of the program. Is there some underlying copy protection that is preventing me from copying over the file yet does not report any error or security warning?
Here are a couple details
* The original install program installs the Access runtime, my program and related system files. The program itself is made up of two files. one Access MDE (like a read-only Access file that contains all the coding) and a database file.
* I then sent them an update which consists of a zip file that contains a new MDE. They are to copy that over their existing MDE in order to use the new version.
* In one instance I was able to remote into the customer's PC and do the file copy it myself. I can see the file copy, the file size and date appear to be correct for the new version but when I would run it it would run the old code. Ths PC was an HP laptop if that makes any difference.
I have a 4gb Kingston Flash Drive, and when i try to copy some file which are large in size such as anything greater than 400 mb (movie) i get an error: "Could Not Find This Item. This item is no longer located in (directory) Verify the Items locations and try again." However i have verified that the file (movie) is there and works, however i have gotten this error after several attempts, i have tried reformatting the flash drive. Also i have changed the security settings for the that folder and have checked the Full Control icon, however i still get the same error.
I would also like to mention is when i copy something such as some pictures which are less than 100mb they do transfer fine. Also when i transfer something from my external hard drive to the flash drive such a Movie (does not matter the size) it also transfers, so there is something wrong with the settings on the computer, however i am unsure what it is.
I started a file copy from one drive to an other using Total Commander, then I cancelled in the middle of the operation. However, when I checked in the Resource Monitor svchost.exe was still reading the file for an other ca. 5 minutes with Background Priority, so the speed was only 15-20MB/s, but still annoying... What could cause this? ImageBam - Fast, Free Image Hosting and Photo Sharing
Since June 2008, I have had a Windows 2000 system connected to a Vista system thru a router. I have several shares defined on the Windows 2000 system. No shares are defined on the Vista system. On 28 April 2009, I replaced NIS 2008 with KIS 2008 on the Vista system. On 23 June 2009, I noticed that the Vista system could no longer COPY files from the Windows 2000 system to the Vista system, tho Vista could still open the files.
I know that, on 19/20 June 2009, the Vista system copied files from the Windows 2000 system. So something broke after that. As I recall, there was a Windows update installed on 23 June 2009. Perhaps, that update changed some settings?
I have encounter the following problem. I have 4.5 GB file siting in Vista drive (NTSF) which I want to copy to external 14 GB hard drive which has FAT 32. Vista refuses copying that file saying that the destination is too small.
I have an odd situation on network copying from my Vista X64 Ultimate PC to a Windows XP Pro PC. I suspect it is something I have altered in the settings / registry whilst I was trying to overcome network copy problems. I am using Directory Opus 9.1 as my file explorer but I don't think this is the problem.
When I copy a large file (say 1.0GB) then the copy progress bar quickly goes to 100% and then remains at 100% for a period of time before completing. If I look in the Performance tab of the Task Manager I can see memory use quickly increase by 1.0GB and then slowly start to reduce. The peak is achieved at about the same same as the 100% is shown and the progress bar remains stuck at 100% whilst the memory reduces (presumably as the file is copied over the network).
I suspect I must have set a cache figure at 1.0GB because if I copy a larger file then the memory increases and then flat lines for a period and then start reducing. In this case the progress bar will speed up to say 60% and then track slowly to 100% and then get stuck whilst the memory reduces. I am up-to-date will all MS Updates
so this is probably hugely naïve, but I would like to make legitimate, playable versions of music and other videos that I have downloaded as Flash Video Files [.flv] to Real Player, and copy these to a CD/DVD. I do have NTI CD&DVD-Maker 7x. Platinum Edition, and have tried to do this, but it does not recognise the .flv format. Is there a simple way of copying the video clip and changing the file extension of the copy so that it will be recognised by NTI CD&DVD-Maker? I stress, that I want a legitimate way to do this. If it can't be done, then so be it, and I'll forget all about trying to do it.
I do alot of file copy and move between HDD and external and network machine. Everytime I want to paste a file, I have to drag the name column in explorer left to give room on right then move the last column left also to touch screen and paste. On XP I can touch anywhere. I can save layout and selected views of folder but not the thickness of the columns.
I was reading about an application that comes with Vista,that make a copy of the files that the user saves, this copy is saved by AutoVer in some part of the hard drive, is like a shadowed copy of the file the user is saving
I have a Windows 2003 R2 x64 (all current SPs and updates installed) and 3 Windows Vista machines (also al X64 versions). When trying to copy a (large - maybe 50MB +) file from the Windows 2003 Server to the Vista Machines (the Server Shared folder is mapped to a drive in Vista) - I will get an error like "There is a problem access I:igfile.txt - make sure you are connected to the Network and try again" Once in a while I will see "Error 0x8007003A" I can copy those files just fine from Windows 2003 to another Windows 2003 machine or Windows XP machines...
I am running Windows Vista Ultimate with Windows Defender Disabled and Norton Internet Security 2009 installed. Someone who is completely trusted sent me an email with an attachment. The attachment was defined as a ZIPP file. I copied the file to my desktop and renamed it to a ZIP file to access the enclosed files. Within the ZIP are four OCX files which I need to copy to my System32 directory.
When I attempt to copy the files to any location in my computer, I get "Windows has found this file is potentially harmful. To help protect your computer, Windows has blocked access to this file." When I click on the "How does this help protect my computer." link it takes me to Windows Mail help. This has nothing to do with Windows Mail. Where can I adjust the Security settings in Windows to fix this problem
I've been pulling my hair out trying to figure out why I can't get decent file transfer speeds between my two Vista machines (Home Premium x64 SP1 and Ultimate 32bit SP1). If I attempt to transer a 1GB file between the two Vista machines I get about 14MB/s, however if I transfer the same file between either of those machines and my Mac laptop it get about 40MB/s. So far I've tried the following to no affect: the steps mentioned in the Window Auto Tuning tutorial but it didn't seem to help. tried transfering the file between the two Vista machines using FileZilla (a free FTP server) and that showed the same slow network speeds. changed over the network cables to brand new CAT6 cables but that didn't help.
I am using vista without sp1. It takes about 6 minutes to extract a 900kb file. This is consistant with any zip file I try to extract. Another example was a file that was 1.7mb which took almost 30 minutes. I do not use any 3rd party programs currently for dealing with zipped files and this was a clean vista install. I thought maybe there was a coflict with the file being virus scanned as it was extracting. I was using AVG but I have it disabled so that it doesn't launch at startup. Please note that is not the most current version of AVG designed for vista. I recall this being a problem even before I installed AVG antivirus however this may still be some part of the issue. I wanted to check for other suggestions before I completely dumped my virus program
I downloaded a demo called Overclocked using ReGet Deluxe. When downloaded it comes as a Zip file which also had a file accompanying it. This is the file that I cannot delete. The extension says it’s a zip file but in properties it just says File as a file type & a size of 0 bytes. It’s located in my storage drive “D” When trying to delete the message I get is: This is no longer located in D:. Verify the item’s location and try again. Cannot move, rename or send to? It just comes up with the same message as above. UAC is disabled. Tried Unlocker but doesn’t work on Vista x64. (worked superb in XP) Used Regseeker and removed any traces that came up with. (Works ok in Vista but not 100% stable?) Tried Regedit and removed all traces of Overclocked in there. here is got to be a way of removing files like this without everyone’s solution of formatting. Surly it’s not as drastic as that?
I have a Vista Ultimate x64, which I reinstalled a few days ago. I also have a large drive(D:), where I keep some of my software, which i don't use regularly or which does not require a performance of my main RAID 0 (C:) setup.
Before reinstallation I didn't remove old software from drive D:. Didn't think I had to, afterall it's not the first reinstall that i'm doing and it would be kind of stupid. Anyways, to the point...
I have a folder "D:Program Files (x86)" with a bunch of software. I was able to delete all of it manually, but a few folders, created by adobe acrobat.
I am logged in as Administrator (actual administrator, not user with admin. perm.)
UAC is disabled
Drive is owned by this acct.
I was able to delete everything manually inside "AdobeAcrobat", but "D:Program Files (x86)AdobeAcrobat 9.0ResourceCMap" just would not delete, getting a "You need permission to perform this action" message.
Folders and Files are set as "Read Only" and when i'm trying to uncheck, i'm getting "You will need to provide Administrator permission to change these attributes" message, after clicking "Continue" i'm getting "An error occured applying attributes to the file" "...filename..." "Access is denied".
I have an Acrobat 8.0 folder from like a year and a half ago, which does the same thing......
All Files have "RA" in the attributes section of the details tab and Owner is "SYSTEM"
im having a similar problem but nothings working so far a) cant delete it - says "could not find this item. this is no longer located in _____. Verify the items location and try again. b) downloaded the take ownership reg and i right click, take ownership, try to delete, gives me same error saying cant find file c) i right click, properties, go to security, and it says "the requested security information is either unavailable or cant be displayed"
Windows Vista Ultimate 64.I right click and hit delete on a file and I get Item not found This is no longer located in C:UsersJustinDownloads verify the items location and try again.
The file is a MS Word docx, downloaded from my college's Blackboard system.I booted into safe mode (under the admin account) and ended up with the same message.I was told this could possible be an issue with Temporary Internet files and IE - I use Firefox. I cleared out the TIF on both browsers and the file is still there.
