Restore Computer Last Condition
Jul 25, 2009
I have a problem with my computer, it is not downloading. I was trying to restore the computer to the last good condition and it only shows yesterday's date. No matter what type of document I try to download even though it shows that the file is downloading and I hear the chime when it is complete I don't know where it goes, I try to download the Regcure and samething happens, I don't know where the file has gone and the disk is filling up really quick I had a 1.7g available yesterday now I only have 244mg.
View 6 Replies
ADVERTISEMENT
Apr 5, 2008
I purchased a HP Pavillion DV2222tx laptop computer that came with Windows Vista Home Premium installed on it. I then purchased Vista Business and installed without making a backup/recovery disk. I now want to put it back to it's factory condition and get Vista Home Premium back on it but can not seem to find how to do it. There is still 4.46GB of HP_RECOVERY on D:/ that you can not see what is on it. How get it back to factory. I have tried pressing F11 repeatedly on startup - that did nothing, tried repeatedly pressing F8 as well - couldn't work that one out and just do not know what to do now. When I installed Business it has taken away the Recovery Manager and I don't know what to do.
View 4 Replies
View Related
Jul 29, 2009
I tried running my HP Recovery Manager a couple of days ago and it kept freezing around 77% so I talked to someone at HP and they said I needed the recovery disks, so I ordered them. I tried using them today and HP Recovery manager freezes at 33% during the re-install process. Why is it doing this? It's driving me crazy.
View 4 Replies
View Related
May 15, 2010
Do I re-install *from Dell RE-INSTALL Disk, Vista 32 home basic /or get new install Vista 32>
IMMEDIATE GOAL; clean/factory direct OS condition Laptop
(have corrupt files, missing drivers, my media, data, photo's, operating system, everything is scrambled, basically tossed all over my drive C.
_____________________
currently have Dell Vostro 1000, Vista 32 home basic, bios AMD 6.0.6002 Service Pack 2 Build 6002 - FACTORY INSTALL WAS SP1 VISTA from dell
x86 based PC, Mobile AMD Sempron Processor 3600+200mhz, 1core, 1 logical processor
BIOS version 2.4
Dell Inc 2.6.3, 12/7/2007
C:/Windows
C:/windows/system 32
boot device/device/harddiskvolume3
US
hardware abstractionlayer; version = 6.0.6002.18005
(factory installed operating system, ONLY HAVE DELL RE-INSTALL Vista 2 Home Basic SP1
I use IE7, and don't want IE8 (had too many crashes same pc, last year,
have no outlook or windows mail even accessable - *so called friend fixed/messed up computer, I have MSoffice 2007 word/(need outlook)
have MS works 9, installation cd
missing many drivers,
1/****Need to know....Am I able to download the Complete Vista 32 home basic INSTALLATION SP 1, cd on this site?
2/since i currently have SP2 don't i just install SP1 and then have to download the SP2 again?
3/How do I completely REMOVE everything on the system and keep C/D & E drives in tack/
4/ how can I get a list of ALL the drivers that i have to download from MS drivers & download ?
5/ do i have to go to DELL drivers and downloads also?
6/ is there also a recommended list of additional programs to download for system *(note below)
7/ My kepboard, cd/dvd burner, USB port drivers also bad- need kindergarden list for install please.
8/with my nursing studies and degree programs I have to have the following -
*Silverlight (also have tomy make sure I can see animations, and that my system will be able to "view" PDF ATI Technology Assessment results and create my focused review
*I have many nursing programs, many interact online,
*Palm/skyscape - daily medical updates *active sync
*adobe, reader,air, acrobat, etc...
*PP, excell,
Windows mobile *sync= device manager-
(don't mean to sound like an idiot, but this may be just standard PC stuff, however with the previous pc wrecker' person doing 1/2 installs, wrong programing, no access to view pdf's, no outlook or mail configuration, system set up to scramble" - BACK DOORS, and then the virus's that hit non stop that took 3 days to fix, *(until i did it in 5 hours and havn't had another attack")
I am very afraid, and just DREAM of having my system do what is is meant to do, (simple) stuff- and that's all......no sabatauge}
*oh yes, and actually burn my own CD/DVD in this burner. ?
? can't this drive E be configured to BURN the following, CD-R/DVD-R & CD-RW and DVD-RW?
right now i can only burn a CD R, and we have a HP home entertainment VISTA 32 (with NO inst disks at all), and it burns all the above..
*We have 2 more Desktop PCs,s that "he" wiped completely clean with no permission, reformatted, and now have Windows 7 OS on them, which are not compatible with many of the school programs, work systems/phones and programs.
View 9 Replies
View Related
Jun 14, 2008
"I am running Vista 32bit. My PC has two hard disks and I backup to the second one driveD.I have had a problem that resulted in reloading Vista.When I now try to restore the backup it says "files made on a different computer - there are no backups on this computer".
View 9 Replies
View Related
Mar 23, 2008
Some how only one of my users whole computer was reset. the other three were untouched. Now my question is how do i restore his computer to a last date. I saw once one of my freinds went to this place in control panel, and he set the date he wanted and he got it back.
View 4 Replies
View Related
Nov 13, 2009
A few weeks ago my computer died from a windows update it automatically did, i managed to get back onto the computer by booting my OS disk to save my files and now i need to completly restore my computer back to factory settings. I Don't want to restore it back to a certain point, or repair my system as i log on, which is all i seem to be able to find in other posts, i just want to completly restore it back to day 1. F11 doesnt work when i turn my computer on (yes im doing it right and ive tried it LOTS of times), F8 brings up a screeen i dont want, booting from teh OS disk just boots the pc normally and alt F10 doesnt seem to be bringing the page that i need up, just an editing page.
View 5 Replies
View Related
Sep 25, 2008
alright so i rebooted my computer a lil while ago, and offcourse it lost a few things i liked about it, any help on how to restore them? first, when i highlight over a minimized windows, i want to view a small miniture window that lets me see the minimized window in my toolbar down below. second, the "switch between windows" button in my taskbar used to pop out all the windows that are up and i would click on a window and it would maximize it, but now, it just shows a few icons, how can i restore it so looks like it did before DONT TELL ME SYSTEM RESTORE, im tired of hearing it lol, everywhere i ask, they tell me "system restore" i dumped my computer, i dont have any saved system restore saves since when did the definition of "reboot" change...restart and reboot are not the same thing, i dont know why people are so hung up on it
View 3 Replies
View Related
Nov 17, 2008
I blew out the keyboard, (thought something might have gotten down there and was the cause of this) but still no change. I tried to restart my Vista Ultimate x64, but because it was keying that letter it just kept trying to search. So I had to hit the power button. This is where it gets weird. Upon restart, it goes to some sort of recovery wizard. No log-in screen, just this wizard. If I cancelled it, my system would reboot. So, after 6 different cancels / restarts, I tried it. It did a recovery that set up two partitions on my HD, but ERASED EVERYTHING. Anything that was not installed originally on the computer was erased. There are no system restore points (Deleted as well) Don't worry, I back-up fairly often. But I'd like to know what the hell happen.
View 4 Replies
View Related
May 26, 2008
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies
View Related
May 28, 2009
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies
View Related
Apr 11, 2008
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies
View Related
May 11, 2009
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies
View Related
Jan 18, 2010
I am running a hp pavilion dv9730 with vista home prem. 32. I need to restore my system but the restore program quits do to a virus in the restore files. As it is restoring Norton sees the virus and removes it from my system but Norton can not see the virus inside the restore files. Right now my system is fine (virus wise) but I need to restore from an earlier restore point because I deleted some files and now my cd/dvd drive is not recognized. But like I said, I can not restore do to the fact that I have a virus buried inside my restore files. I could care less about the virus in the restore files, my main goal is to get my cd/dvd drive working again so I can install my business software.
View 5 Replies
View Related
Aug 28, 2008
I've been facing issues with backup / restore / system restore
View 7 Replies
View Related
Jun 19, 2009
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies
View Related
Apr 13, 2008
Trying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies
View Related
Sep 30, 2009
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
View 9 Replies
View Related
Jun 16, 2009
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies
View Related
Feb 22, 2009
How do I transfer my quickbooks 2007 data on my xp computer to my new vista x64 computer with quickbooks 2007? Can this be done? If so how do I do it?
View 5 Replies
View Related
Apr 7, 2010
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies
View Related
Apr 8, 2009
It seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies
View Related
May 5, 2008
I would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
View 9 Replies
View Related
Jul 29, 2009
I have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
View 6 Replies
View Related
May 16, 2009
Does any one know how to restore the restore point from dos in Vista Ultimate 64 bit. I need to know the steps and directories in how to restore any one of them listed. For some reason the restore points are not listing. When I use Vista restore program I think it's a big bug that Windows need to fix in vista.
View 9 Replies
View Related
Dec 11, 2009
I have a problem: I have a Windows 7 computer that is part of a Domain. By using System Restore, Windows has managed to ruin the trust relationship with the domain. I use a domain logon and am the only administrator on the machine (the Local Administrator is disabled). I cannot log in normally, due to the trust relationship issue. If I disconnect the network cable while logging in, I can (cached credentials), however I cannot change any UAC-protected settings because if I enter my credentials into it, connected to the network or not, UAC will simply show an error "This operation requires elevation". Nothing I try will work.
I cannot disjoin the domain, because those controls are protected by UAC. Logging in from a remote machine using my credentials will give me "Access is denied". Resetting the computer account in AD has no effect. I cannot format and reinstall because this laptop does not boot from CD by default and requires me to install a program to change BIOS settings (don't ask, it's a Toshiba, the usual way is broken). I cannot install this program because I am faced with yet another UAC prompt. I cannot remove the harddrive because of the laptop's design. how to salvage this computer?
View 9 Replies
View Related
Oct 27, 2009
I have been searching far and wide for a solution to my networking problem. I have 2 computers that i connect directly to each other by ethernet cable. Both computers also connect to the internet via wifi. So, on each computer, I have my Wireless connection, and the 'unidentified network' link between the two computers. The problem is that the 'unidentified network' settings never save, so when ever i restart either of the computers, I have to make the unidentified network private again, and there is no way that i can see to actually save the unidentified network settings in a profile. Also, to prevent the computer to computer connection from broadcasting over the wifi connection, i have to disconnect the wireless from one of the computers. I have tried making the wifi a public network and the ethernet connection private, but it never seems to work. anyone out there know what i can do?
View 4 Replies
View Related
Apr 14, 2008
I'm running Vista Ultimate on my present computer, have full installation dvd. I'm buying a new Dell computer that comes with Vista Basic installed. Can I move Vista Basic from the Dell computer to my old computer and install my Ultimate on the Dell?
View 9 Replies
View Related
Jul 29, 2009
- 2 Vista computers with Windows mail, networked through the internet;
- I get all the emails at my "main" computer but the other computer only gets email periodically!
View 5 Replies
View Related
Sep 8, 2009
I am stumped as to an issue I am having using remote desktop. I have several machines in the office that have been using RD for a while without issue. All are XP SP 3 machines. I have a new Vista Ultimate machine that I am trying to remote to with an XP machine. I have set up RD on the Vista Machine, Firewall is checked, forwarded to the correct port, set the port rule on the router...all the typical issues I am aware of. Everytime I try to connect I get "This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator." I can ping the Vista machine and I can remote from the vista machine to any RD enabled machine.
View 9 Replies
View Related
May 18, 2010
Daughters laptop was reporting that the HDD was about to fail, should backup and repair.
The concensus of opinion suggested a new HDD was the answer.
Have done that and created the restore disks from the original HDD.
Started the restore and went ok until nearly at the end of formatting the new HDD when I got the message
"error if it happens again contact HP" it did not happen again and appeared to restore files ok, did a verify and no errors.
Trying to boot from the HDD it now fails. Errors report registry incorrect plus others.
Cannot load my Vista version as is 64bit.
I cannot obviously send the errors to MS as the thing will not boot.
Any solutions obvious apart from getting a disk containing Vista 32 bit system
Laptop is an HP Presario running Vista HOme Premium 32.
View 9 Replies
View Related
