Migration Of Upgrade Installation To New Drive
Mar 26, 2008
Following an unfixable error with the Vista Backup & Recovery program I've decided that my first Vista installation has reached the end of its natural life.It was an upgrade from XP Home Edition (which came with the PC) to Vista Home Premium on the original C partition. Not ideal, but now I would like to start afresh with a clean install.I have purchased a second faster SATA2 drive, which I have partitioned in two: G drive with 58.5GB (intended for the new Vista installation), and Z drive with 238GB to which I will copy all my data before the reinstall. The drive is formatted as a basic disk and both partitions are NTFS primary partitions (I found previously that Vista install doesn't accept dynamic disks for the OS partition).As my copy of Vista is an upgrade, the reinstall has to be initiated from within the existing Vista installation for the key to work.
My question - will Vista reinstall cleanly onto the G drive without problems? I have found that the install commences properly (I quickly
stopped it from proceeding as it was only a test). My concern is that the migration could fail half way through if the machine reboots and doesn't know which disk/installation to boot to!Anybody with experience of this scenario? Also, if it does install correctly onto the G drive, am I right to assume that the original C drive partition on the old drive then becomes inaccessible? (Hence the need to copy files across before the install attempt).
View 8 Replies
ADVERTISEMENT
Mar 27, 2008
I have windows vista ultimate 64.... its on my Ide Maxtor 200GB... which is very noisy and seems to lock up.... So I went and got a Sata Seagate (my prefered brand)... and downloaded the Disk Wizard software from Seagate to migrate drives.... rather than having to lose all my data and operating system etc. In and Ide to Ide situation, this works fine... you simply swap drives over once Disk wizard finishes....
But, when it finished and advised me to swap drives over... disconnecting IDE drive meant when I powered up PC, it would not boot, and gave me error message... NO IDE HDD Found!!! Obviously the boot manager is still looking for IDE drive.... So I then proceeded to use Vista Boot Pro... but this doesnt seem to want to run on my machine?... it shows in Task Manager, but nothing on screen... Not one to give up, I thought I would simply use the Vista Disc to boot to Repair mode....
I diconnected Ide drive... left Sata connected... powered up, disc started, got to Repair window... and it showed a window for drives which was empty... but had two tabs... install drivers and cancel... I chose to install drivers... from my motherboard disc as this contains the Raid drivers.. I assume thats what I need to install.... Anyways... was a waste of time, error message stating they failed... Chose the right ones...Via x64 etc...
View 9 Replies
View Related
May 18, 2009
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
View 5 Replies
View Related
Mar 23, 2008
I am considering upgrading my motherboard to one that has a higher specification than PCI 2.2 to get over a problem with the new 802.11n Wireless NICs. Can I avoid reinstalling all the system and applications by keeping the existing system partition? Re-activating Windows should be legally possible (even by telephone) because my Vista version is a full retail one. I don't expect it to be that simple, but maybe someone has some advice about using the Vista Recovery Environment to re-build the HAL, or erasing certain registry keys in Safe Mode to force Vista to reinstall the correct system devices. At present, I can not get past booting under Safe Mode, so there has to be more to the process - if one is achievable.
View 7 Replies
View Related
Jun 7, 2008
i want to reformat my laptop. it originally had xp but i upgraded to vista home premium, if i reformat, can i use the vista upgrade again? on the box it says one installation on one pc. anyone shed any light for me
View 6 Replies
View Related
Feb 19, 2009
Is there any way I can move a perfectly working installation of Vista to a new PC? Friend has decided to upgrade hardware at last but doesn't want to lose all he has already installed. As it's really only the drivers that will have changed, is there any way I can get Vista to update the installation. I know in Xp you can do a repair which basically appears to reinstall 'over the top' and leaves everything intact but I can't find the same sort of thing in Viats?
View 6 Replies
View Related
Mar 27, 2009
I dual boot.
C: Xp Pro
D: Vista Ultimate 64
And I'm ready to make Vista my only OS. Is there a way to migrate, r copy, Vista 64 from my D artition to my C partition without re-installing? I have Norton Ghost 14. Which doesn't run in Vista 64, but it does run in DOS. And I suppose I can use the disk clone feature?
View 9 Replies
View Related
Mar 29, 2008
"Microsoft's latest efforts to persuade customers to upgrade to its much-maligned Vista operating system have met with a cool response from users."
View 9 Replies
View Related
Mar 23, 2008
I would like to copy all the contents from my boot drive to a new hard drive recognized by the BIOS. Easy Transfer Wizard works between two systems not a single system... I want to copy all my data including the hidden and system files to the new drive and then reconfigure the boot sequence to boot from the new drive... Western Digital has a utility that works with XP but not with Vista... what is the best way to move this data... will drag and drop move everything?
View 5 Replies
View Related
Sep 16, 2009
I have an eSATA drive formatted NTFS from my XP installation. Drive works fine from either XP or Linux (multi-boot machine) I had previously tried Vista on the machine but it saw the eSATA drive as unformatted. Gave the message "Do you want to format this drive?"
Very dangerous as an unknowing person may have actually formatted the drive and lost all their data. Interestingly enough, any time I've tried to access the drive, Vista ran a chkdsk on it at the next boot up. CHKDSK from Vista saw it fine and reported no errors. but could not read the drive once booted to the desktop. I eventually gave up on Vista and just did a Win7 install yesterday.
View 9 Replies
View Related
Jun 23, 2008
I have been having issues with the .NET framework and my V-Ultimate 64 machine. I essentially can no longer sync with my ZUNE. (I do not want an IPOD, forget it). I wasn't able to do a machine repair I believe because of SP1... so I went out and bought another hard drive to put in the machine. I tried the following sites suggestions to install the new OS on the blank WD320 HD and had no luck. I had my machine stripped down to just the video card, an old plug style keyboard, no mouse and nothing USB plugged in.
NO LUCK either. My machine is AMD 6000+, two 750GB hard drives, Vista Ultimate 64, 4GB RAM, one new 320GB hard drive, all sata, two DVD roms (one disconnected) and dual NVIDIA Fatal1ty 8600's in SLI (one disconnected for the new install). Essentially when the installer finishes and attempts to restart to finish its install I get a blue screen? What is the issue?
View 6 Replies
View Related
Aug 17, 2009
My husband and I just bought a brand new Toshiba Satellite A505-S6965. It comes installed with Windows Vista Home Premium 64-bit (SP1). We tried installing an upgrade of Windows Ultimate using the 64-bit disc. It crashed our hard drive. We took it back to Best Buy and they told us that the computer just had a bad hard drive. They gave us a new computer (exact same model). We went home, tried installing, same thing happened. Called Toshiba. They don't know why it would be doing that. Called Microsoft. They don't know why it would be doing that either.
View 6 Replies
View Related
Jul 2, 2009
I bought Ultimate w/SP-1 OEM 64 bit. I currently have Home Premium 64 bit. Can I just install Ultimate on top of Home Premium---or should I uninstall it? If I uninstall Home ver during installation of Ultimate, why would I need to keep the recovery copy of Home ver on "D" that came with the computer?
Shouldn't I get rid it and free up that partition for other use... then just make a complete computer recovery copy and store it on the USB external drive? I like what I have read a litte about the Maxtor One Touch backup--- but have never used it. I presume it will do a complete computer back up?
View 8 Replies
View Related
Mar 15, 2009
I am trying to import an OE6 Identity from a second hard drive that had been previously used as the boot drive for my computer, on which I was running XP and using Outlook Express 6 (OE6). I rebuilt the computer with a fresh installation of Windows Vista on a brand new hard drive. Now I am trying to set up Windows Mail and tried "File | Import | Messages | Outlook Express 6" to transfer the old files over, but on the "Specify Location" window the "Import mail from an OE6 Identity" option was greyed out and not given as an option. So it won't let me point to the old hard drive Itentities folder to import the old folders and message files.
I couldn't load Vista as an upgrade to XP because I was going from 32 bit to a 64 bit sytem. So during the installation, Vista didn't recognize I had a previous load. I think Vista is too smart thinking I don't need the option so it isn't offering it.
View 7 Replies
View Related
May 22, 2009
My computer just died, with a complex Vista installation on a 250 GB drive. I have a replacement unit on its way, but is there any way to transfer the drive with the Vista install to the new computer and get a working system? My Vista is a full retail copy. I'm now working on XP from my backup machine, an old Dell Optiplex GX200, with a 733 MHZ P3 that's not capable of running Vista. I could reinstall Vista, but would lose an awful lot of data and installed programs.
View 9 Replies
View Related
Feb 13, 2009
I'm new to the forums and the reason im Posting is i have a older (2004) Modle Alienware Laptop computer witch i upgraded to Windows Vista Ultimate.
Eveything is working great thus far except after the install my DVDRW Drive witch is a SlimType DVDRW SOSW-852S ATA Device. it dose show up in my computer if i insert a disk it dose not tell me what hte disk is and dose not boot the disk. I can hear it spinning. the Drive dose show up in my BISO aswell. it can also boot from the vista CD and Format and Re Install windows Vista ( i tried to boot XP Pro and no luck on hte drive working) i called alienware they said it MIGHT be a incompatable hardware issue.. Any ideas on this would be great i have read meny fourms on this issue with this drive and they all seemed to just not work in or out of the windows OS but mine DOSE work outside the OS.
View 9 Replies
View Related
Mar 29, 2008
The motherboard on my old computer died. Hard drive was still OK, though. Have put it in an external HD enclosure and hooked it up to the new Gateway - running Vista. I don't have the disks for Office XP, it came pre-installed and I purchased it, but no longer have the product key. I do NOT want to upgrade to Office 2007, I want to use the Office XP I paid for, and was happy using. I can't transfer programs using WET or WETC - at least, I haven't been able to figure out how to do it, with both drives connected to the same computer. How can I configure Vista to run my the copy of Office XP currently installed on my old HD?
View 9 Replies
View Related
Mar 23, 2008
Do you have to have XP fully installed on your computer before to install upgrade Vista? Can you in install Vista on a blank Hard Drive and then when Vista asks for XP just put your XP CD in and then continue with Vista. That way you don't have to over lay Vista with XP which is just more garbage on your computer.
View 8 Replies
View Related
Mar 29, 2010
I have XP Home (32bit) in finnish. Can I buy a Win 7 UPG (in finnish) and upgrade to 64bit in the same process? I know I have to make it dual boot, as I wouldn't have a printer under 64bit Win, as Canon fails to provide 64bit drivers for most of their stuff, like my LBP-2900
View 5 Replies
View Related
Jun 21, 2008
I have full version of windows Vista Ultimate installed on a 250gig Western digital hard drive and I want to upgrade to a 500gig Seagate, reformat the 250gig and move it to another older xp machine and am not able to find any info on how-to-do this procedure of moving all the contents from the 250 to 500.
View 6 Replies
View Related
Jul 16, 2009
Ive been using my 500gb hitachi hard drive for along time now and its just about full, i have a new 1TB hard drive which is also more powerful.M Does anyone know how i can transfer all the contents from my old 500gb hard drive onto this new 1TB hard drive, as its running slow with only half a gb free space on it. I want to sell my old 500gb hard drive after i have transfered all my data from it to my new one.
View 8 Replies
View Related
Jun 13, 2008
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
View 9 Replies
View Related
May 11, 2009
does anybody know the date of Windows 7 free upgrade for Vista?
View 9 Replies
View Related
Mar 14, 2009
I have a Aspire AM5620-E5301A Acer computer. On Acer it has Windows Vista Premium Home. I bought Windows Ultimate software to put on my Acer computer. It starts to load up OK, put in the key number in than next step is. To pick custom install or upgrade install, but upgrade choice is grey out. It is disable from using the upgrade choice, I want to choose to pick. I did not purchase Windows Ultimate through Acer anytime upgrade option. It was a store bought software it was cheaper than Acer price they offer. What is the problem with installing Ultimate with Acer computer?
View 9 Replies
View Related
Jun 16, 2009
I am trying to clean install Windows Vista Home Premium 32 bit. If you read my other post, I got around the blue screen about page in non paged area. I got the bad ram stick out and got a new one for my computer. (Toshiba Satillite). And I install it and it goes good until completing installation then it hangs.
View 4 Replies
View Related
May 2, 2008
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
View 9 Replies
View Related
Mar 26, 2008
I have been trying to upgrade from Windows XP Tablet Edition to Vista Ultimate on my Travelmate C300 laptop. I have found the following error file after the install fails in the location: C:$WINDOWS.~BTSourcesPanther. The file is called: setuperr.log. The content is quite long but i will post it here - advise how i can upgrade to Vista?.................
View 5 Replies
View Related
Jan 2, 2010
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies
View Related
Apr 27, 2009
I have a laptop with 64-bit Home Premium. The warranty expires in June. I want to upgrade to Ultimate. I haven't checked out the Anytime Upgrade yet. Will I be able to get the 64-bit upgrade to Ultimate or is a 32-bit upgrade to Ultimate the only upgrade path?
View 9 Replies
View Related
Mar 23, 2008
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies
View Related
Jul 2, 2008
Does 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies
View Related
