Local Access Only, Unidentified Network: Disabling IPv6, Updating Drivers (there Were No Updates)
Jul 29, 2009
I bought a Vista back in 2007 and the internet has been working great until recently. I got a rogue on my laptop and ever since I only get local access. I've been googling this thing for around 3 ~ 4 days now and I've tried just about everything I've come across and nothing seems to be working. It says I'm connected to the router with excellent signal strength but then it says the router isn't connected to the internet and I'm sure that's not the issue because the computer I'm typing this on is connected to the router fine and it's a Vista as well so I'm sure it's not a router-Vista compatibility issue.
I've tried ..
- disabling IPv6
- updating drivers (there were no updates)
- multiple scans
- disabling firewall
- uninstalling norton (with the removal tool download)
- deleting my router profile and trying to connect again
- connect via ethernet cord (doesn't work)
When I do IPCONFIG /ALL, I get .. I've tried manually putting in the IP stuff, but I didn't know the gateway and DNS details so I couldn't really do it.
** I DONT have the reformat disks. When I bought the laptop they didn't provide me with one and when we asked for one they said they'd send us one but never did. Now they're closed (nationally) and I'm not sure as to where I could get one...................
I was online yesterday all day. I put my rig to sleep last night. It powered off during the night. I turn it on this afternoon. No internet access. Every other XP machine is online fine, wireless and wired. I have tried just about every fix I have seen:
Disable DHCP Flags no firewalls blah, blah, blah. Restarted router, modem, car, dog, etc.
What can I do or try? A list would be nice. A chatting support option would be nice. A little instant messenger like device with a tech on the other end.
I'm aware that this is quite a common issue and i apologize if it's been repeated hundeds of times, but it's driving me crazy. I have an acer 8920g laptop with an atheros AR8121 pci-e ethernet network card. On my older laptop, the internet connects fine via cable modem and an ethernet cable (this has a broadcom network card). On the newer laptop i just seem to get local access only, with a 169.x.x IP address, no default gateway or DNS server addresses. Both laptops run vista home premium, and i'm totally lost and confused as to where it's going wrong.. Ive been searching a few sites and there doesnt seem to be any definitive answer to this problem. Does anyone know how to fix this before i throw my laptop out of the window?
I have scrolled through pages and pages of posts here and tried to find my solution. I must repost this issue for me. I had this issue after building my rig and it miraculously fixed itself one day when I powered the computer on. It worked for a few months. Then I inadvertantly put my computer into hibernation or sleep, instead of powering it off, like I normally do. Vista didn't like that. So now I am offline again.............
I'm posting this from another laptop using the same router. It seems this is a common problem without any certain resolution. I've tried most of the plentiful suggestions on the web without success. I obviously don't want to flatten the laptop and re-load just to get internet access back.
My friend, who now does not have a connection to internet with a wired router, has asked me for help. His connection is showing "local access only" . He runs Vista Premium on his desktop and was connected yesterday. Vista updates installed automatically, and after restart he only had " l. a . o. " connection.
i just got a new PC last friday with 64bit vista ultimate and i have been having alot of problems with hooking it up to my home network. At first, i would plug it in and it would only let me get into "local area connection" local access only. I did a repair install which got rid of all updates that the company had put on, so its a fresh SP1 install. Now i can sometimes get it to connect to the internet, but the speed is ridiculously slow, like if i look at the antivirus updaters for speed (i cant access speedtest.net cuz it says i dont have flash or w.e. and it wont let me download it cuz the site wont load) i get max speeds of...4 kb/s.
The network icon shows access Local Only. The network and sharing center shows a red X to the internet. However, I have internet access. It's just reporting that I don't. This is intermittent. Sometimes rebooting solves the issue but the Local Only icon can come back shortly afterwards.
I copied the "dbx" files from Outlook Express 5 into a temporary folder on the new machine.
I imported them into Windows Mail (correcting the path error in the import wizard).
Windows Mail crashed, and when I reloaded Windows Mail all of the local folders had vanished except for the Inbox, which was inaccessible. After restarting it again a few times, nothing changed.
Eventually I went to the folder store in AppData, and deleted all the files in the Windows Mail folder, assuming them to be corrupted in some way.
When I restarted Windows Mail, it recovered and recreated the Local Folders structure for me again.
Back to square one.
I tried importing the "dbx" files again, and this seemed to work,appearing under "Imported Folders".
All seemed well, but now for the problem.
If I want to create a folder, or delete a folder, or move a folder,the change does not show up live in the folders list in the left pane.
However, if I click on local folders, the change shows up in the right pane, which lists the local folders tree in expanded form.
To repeat, Windows Mail seems to make the change to the folder structure, but does not update the live folders list in the left hand pane.
However, if I restart windows mail after creating, deleting or moving, the change is visible in the left hand pane.
I seem to have one of those 'bad' drivers that stop SP1 from updating via WU. I spoke to a tech support agent for MS last night and they said it's not the drivers that cause the fault, merely re-installing them after SP1 installs. I installed the SP1 standalone and have had no problems since. Is this a safe alternative to use? They also said this problem was with WU and would be fixed on the 18th of this month (April). Is this meaning I can get SP1 with the Creative drivers installed fine via WU?
I am new to Vista, and definitely not in league with the pros, but I have gone through all the gaming posts, and followed the suggestions for downloading updates, especially the SP1. Here is my issue: Despite troubleshooting; updating all drivers; downloading and installing SP1, and performing all automatic updates, I still receive a critical error message regarding virtual memory, which crashes the game after the first level, when loading the second level of the game.
My system is a HP Pavillion dv9500; windows vista home premium 32 bit OS; AMD Turion 64x2 1.90 Ghz; 1938 MB RAM; I changed the compatibility to those recommended for win 95 games; have increased the virtual memory via custom settings to the maximum of (1938 x 3) allowed per system. I love this game, and really want to play it on my laptop, but at this time, I do not have any free money to upgrade or purchase or make changes in hardware, etc. Does anyone have a fix for this?
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
I keep getting reminded by the automatic updating that I have updates. Many of them lately have been for Office which I don't have. How do I get rid of these from the list of updates? They don't go away.
I Have An HP Dv5t Pavilion With An Intel Pentium Dual CPU T3200 @ 2.00GHz, My Wireless Internal Network Card Is A "Broadcom 802.11b/g WLAN".I Have Been Using This Laptop For 2 Months With No Problems At All. And Just On Thursday My Norton 60 Trial Ran Out, So Of Course I Deleted It From My Control Panel. And After That, Is When I Started Getting This Problem. I Have Looked Around The Web And Tried A Dozen Different Solutions That Do Not Work For Me. And It Has Been Pissing Me Off So Much To the Point Where I'm About To Format The Hard Drive. I Do Not Wish To Take Such Drastic Measures.
This seems to indicate that perhaps there is a way to allow identified programs to access the computer. After all, Microsoft Office suite does not trigger the UAC and it read-writes to registry, etc... So, what is available to allow Vista the "Identify" my program as safe, leaving UAC alon.
Before Installing Vista Ultimate X64 SP1 my wired (crossover cable)lan was working fine. Network identified as private Home network. Settings below with static IP
Vista Ultimate x64 IP 192.168.0.1 Subnet mask 255.255.255.0 Default gateway 192.168.0.1 Default Dns 192.168.0.1
Mostly, when I install programs in Vista, there's no problem starting them. In a couple of cases, though, whenever I run the program (whether from the Start menu or by double-clicking a data file), Vista posts a message: "An unidentified program wants to access your computer." It gives the options "Cancel" and "Allow". Well, obviously I want to allow the program; I've just started it! And the programs were installed through a normal installation process. I've tried uninstalling and reinstalling those specific programs, but I get the same results. How can I tell Vista to stop asking me and just allow it?
Mostly, when I install programs in Vista, there's no problem starting them. In a couple of cases, though, whenever I run the program (whether from the Start menu or by double-clicking a data file), Vista posts a message: "An unidentified program wants to access your computer." It gives the options "Cancel" and "Allow". Well, obviously I want to allow the program; I've just started it! And the programs were installed through a normal installation process. I've tried uninstalling and reinstalling those specific programs, but I get the same results. How can I tell Vista to stop asking me and just allow it?
I use my laptop both at home and at work. I have mapped a network drive to a shared folder on one of my home computers. Now, logically, every time I use my laptop at work, I get a balloon message saying not all network drives could be restored (or similar, I'm translating from dutch). I know that, and I'm not expecting it to be. I just don't want to do it by hand every time I log on to my home network.
Is it possible to disable that balloon? I've found this old (2004) article for XP that allows disabling ALL notification balloons: but most balloons actually contain useful information. I only want to disable this specific balloon tooltip. Using: Windows Vista Ultimate 64-bit, without SP1 (haven't received it through Windows Update yet, and I'm not downloading it manually).
I have (vista home perimium) my internet connection shows unindentified network,i am not able to connect any wifi connections.but on my friends who are who are using the same wifi connection ,has no problem in the connection.
On my new laprop with Vista Home Premium I have several network connections for the different locations at home. Beside the wireless internet connection I have a wired and a wireless connection to my local network,, which ends up in a proxy server for the internet connection. My wireless connection directly to the internet (IP=3D192.168.1.51) is correctly identified with the name of my wireless router. The other network connections (IP 10.1.1.x) are identified as "Unidentified network" and declared as "Public". I always have to manually redefine it as "Private" but did not find a possibility to change the name. Is there a way to permanently set the desired values?
I also have a problem that the connection to my XP business desktop breaks down after a while. I have a mapping to a share (c$) which works prefectly for a while but after some time (don't have enough experience yet how long it actually takes) copying files from vista to XP is not possible anymore, while the opposite direction is still OK. I guess it cannot be a fierwall problem, I have turned off the Windows firewall and use a desktop firewall that works OK all the time.
I recently moved my wireless router and cable modem away from my Vista PC. It was always configured wirelessly, as I knew I would have to move it at some point. I left the computer on when I unplugged the router etc. and then set them up downstairs. When I tried to access the network after everything had been set up again, I noticed that Vista thought my home network was an "Unidentified network" but still had my ssid in (___). Only problem was that now my network is "local only". I am connected to the router as local-only, and tried to adjust my router setting via the router page at 192.168.1.1 It was returned as page not found. Is Vista confused? If I was truly conncted to the router and even if internet was not working I should be able to adjust the settings on the router,right?
I can access the internet just fine with all of my other devices in the house, such as Tivo, Ps3 and Windows mobile cellphone. All of these are able to connect to the internet through my router. There are other networks available around me, so I tried to connect to one of those. Same thing, local only. I cannot confirm that internet works on this other network. But I have narrowed it down to a problem with my Vista computer.
I just installed an OEM windows vista home premium onto my computer so that I could take advantage of my 6GB ram. Unfortunately I don't know too much about building systems and I have an internet problem. After I installed the OS, when I plug my computer into my router, I always recieve "unidentified network..limited or no connectivity". I've done everything that the internet company has asked me to do as far as my modem/router is concerned, and Acer wants to charge me a buttload for their help.
Am I missing something simple that I need to do with my 64 bit software? I downloaded the 64 bit drivers for my LAN, audio etc from the acer website but it seems to still do no good. I even downloaded the driver directly from my Lan ethernet controllers brand website. I've been stuck here for days without much help and the wierd thing is that my girlfriend can plug her computer (32 bit vista home premium) right into the router and it connects fine. I'm downloading SP2 now if that makes any difference.
I lost connection thinking it was the laptop i tried switching off the wireless card and deleting teh settings however it did not help. I only realised i had just lost connection completely. Now every time i connect i get unidentified ntework limited connectivity.
It all started with failed updates. Then I discovered that I couldn't run the check disk utility. A friend finally gave me a solution sfc /scannow in DOS which told me I had some corrupted files that windows couldn't fix. It told me to check out the log - but I couldn't find it. Now I discover (Having read a thread in VistaForums about the update error code 80070652) that I no longer have tabs in my Task Manager. aaaoorrrgh! I going nuts. how to restore these functions without losing all my data and updated drivers etc. (I'm not a beginner but I'm a sort of low level intermediate)
So I turned on my PC this morning ( vista 64 bit ) and I could not connect to the internet. I hover my mouse over the little internet connection icon in the botom right hand corner and it says local access only. Has anyone else had this roblem? Is more information required (more than likely) jsut let me know. This is jsut another reason to have vista.
I upgraded to Vista a while back, and since then I can not access my webcam. The only option is to uninstall it. I have downloaded all drivers, but I still can't access it. It is a built in webcam for HP Pavilion dv2000. This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane.
I have 2 laptops both running vista home premium and both have been working perfectly until recently. I use 3 mobile broadband and this worked fine until i upgraded the hardware to a faster version. When i did this i could not connect to the internet on my 2nd laptop. I was getting the message "local access only". My other laptop still worked fine on the new dongle so I could live without my 2nd laptop on my home internet as i primarily use this one for college anyway. However, i then decided to get a mobile broadband router. When i connect this up i can detect the network on both laptops and connect to it but i am now getting the message "local access only" on both computers.
I have spent literally hours of my life on the phone running through every kind of test with my isp and still have gotten nowhere. They cannot identify the problem and are telling me that there actually isn't one and can't understand why its not working!
