Installing Business OEM 64-bit Over Home Basic Trial?
May 30, 2009
already has a Vista Home Basic trial installed but it has ended by now. It also has a couple of drivers already installed. However I have an OEM CD of Vista Business 64 that I'm going to use and I also want to have Vista to be in it's own partition. It's been a long time I had to format and create partitions so I don't remember much. And it was with XP then, not Vista. I was planning to format the drive and then install Vista Business 64, but I've been told I can simply select an 'upgrade' option from Home Basic to Business and keep the rest as it is. Is this true?
I also know you can create a partition in Vista, but can it be created in the drive where Vista is already installed? Like for example it's installed on a 640GB drive. Can I split it and have Vista be in a 80GB drive while the other 560GB are in a new completely empty partition? Also, in case I decide to format instead, should I do Quick Format or Format? I've been told the only thing normal format does is check for errors at the end. Taking in consideration that Vista Home Basic is currently installed is Quick Format acceptable?
I got a pre installed version of Vista home Basic. Now i just purchased an upgrade disc to Business. I cannot do the upgrade, the computer tells me that i need to get e newer version. what do i need to do.
I understand this can be done online. The information says that I need the Anytime upgrade disk to complete the process. Is this so? Sorry to be stupid but need to know the steps involved. If I dont have an anytime upgrade disk, how do I get one?
I bought a new laptop with Vista Home Premium and was told that I could install office 2003 without a problem. I have the disc for small business office 2003, that I have installed on my PC with windows XP pro. I load the disc and the wizard opens and starts the download but stops about 1/4 of the way through saying there is an error- a file is missing and to use the disc ( which I already have in the drive).
I am confused. I recently purchased a brand new Toshiba Satellite laptop (from a very well known retail vendor). I have Windows Vista Basic running on it. For reasons I won't go into right now (but perhaps in a later post after this), you might say I was forced into doing a little research on my laptop in order to determine whether it is a 32 or 64 bit operating system. Well I found out that my version of Windows Vista Home Basic is 32-bit. However, I am also aware that it is available in a 64-bit version. I also found out that there is such as thing as Windows Vista Starter Edition, which supposedly is the ONLY version of Vista which is NOT 64 bit. If this is true, then why does my System Information tell me that I am running a 32 bit version of Vista Home Basic edition? I do not understand this.
Let me clarify something very quickly here. I am a Computer Networking major at the present time. I do not need someone to speak to me in terms which only someone who doesn't know who to turn on a computer would understand. Lastly, let me also clarify one last thing (hopefully). If there is such as thing as a 64 bit version of Vista Home Basic, then why does my laptop only have the 32 bit version? Is this because I have the "starter" edition, and in order for me to get the better one I would need to actually PAY to upgrade? But why in the world would I need to actually have to PAY in oder to get nothing more than yet a DIFFERENT edition of the exact same OS that I am already running on this laptop of mine? To me, either Windows or Toshiba would have made this a whole lot easier to understand if they would simply have made a DISTINCTION between Vista Starter edition and Vista Home Basic.
I am wondering if it is possible that I could create a new partition on my Vista home basic just for storage for pictures and document files mainly. If I could do this, would it help the speed of the computer? If so, how would I go about doing this? And, once stored in the new partition, would I be able to open them as normal? I already use flash drives, etc for storage, but have run out of room on both of those, and just cant afford to buy more right now. I need to speed up this pc, and I know the vast number of pictures and documents and scans I have on here are probably the main culprit for slowing it down. (I do genealogy, and ebay- and have huge number of pictures relating to both, as well as text documents, .rtf files, .pdf files, .doc, etc).
many websites show the minimum system requirements for vista home basic: they say 512 mb ram will do. i have this "old" pc (p4 1.7 ghz, 3 x 256 mb ram, geforce6200 64-bit), a "siemens scenic t", and i am wondering if "home basic" will run smootly on this machine. although it meets the minimum system requirements, i need to know if "home basic" _will_ run smoothly on this computer. nothing "special" will be done on this machine, just internet, some basic word processing ?? la ms word, opening photographs, listening to music (mp3), watching the average online movie like on Internet. before i spend money on vista (home basic) for this computer, i sort of need to know if it will run "normally" with the above mentioned specifications.
I keep seeing great Vista security tutorials in which they use GPEdit.msc to change a setting. Unfortunately, I'm running Vista Home Basic and have yet to find this program.
Having checked I cannot find an upgrade path from Home to Business. I have a client with 5 Vista Home PC's which need to be moved to Business in order to connect to SBS2003. What options are available?
After activating the pre-loaded applications on my new notebook Acer Extensa 4220, it broke down. Error: C:Windowssystem 32dfrgui.exe, - 1073741502. I tried to press alt+F10 and F2. Tried to boot it with recovery disc and to get into bios. With no results. The screen remains grey and dead. Can anyone tell me whats wrong? I can't get an answer from Acer Aspire support and there is no warranty for software-errors.
i recently had to take my dell dimension c521 back to factory set, using repair my computer on the f8 key advanced boot options (basic installed). everything loaded well and running basic no probs!!however i have an upgrade disk for home premium when i install it, it has disabled option to keep original settings and files and performs to install home premium and moves my old settings to (windows old folder). when i first got disk it just upgraded to home premium with settings and files no problem.have i done something wrong at factory set or is there a way to upgrade keeping my settings.
I know that upgrading from Home Premium versions to Business versions is not directly supported (I don't think it is, anyway). I have 10 licenses for Business and I wish to join a domain. Is there a way I can load Vista Business and apply my Business licenses to sort of "quasi-upgrade" my newly purchased machine which came with Home Premium to Vista Business? That is, other than a clean install (I'm trying not to have to track down all the drivers). There is no data on the machine now so I don't have to worry about data. I was thinking maybe a "repair" install or something? Or an "overwrite" install?
I am running rdiff backup (Not that this makes a difference for the problem) on Windows that runs fine on Windows XP and Windows Vista Business N. But it doesn't run on Windows Vista Premium because of the junctions that exist in Vista. The difference is that in Vista Home Premium you can't follow the junctions but in Vista Business N you can. Meaning, in Windows Explorer running Vista Business N if you browse to a location with a junction (say Documents and Settings) and click on it, it follows it to it's new location (Users) where in Vista Home Premium, when you click "Documents and Settings" you get the "Permission/Access Denied Error" Anyone know why? Or better yet, how to fix it? Or is this just a difference between Business and Home?
I am currently using my Dell Inspiron in safe mode as I cannot use it in normal mode without freezing soon after loading. For some reason, the Ms Help page says there is a prob with my Product ID so I can't get help there unless I pay for it. I have just had Service Pack 2 installed but the problem started before that upgrade. Also, in device manager, under Network Adaptors, I have 6TO4 adapters 'unable to start' and also ISATAP adapters similarly unable to start. Would these events be the cause of the freezing? I don't have more than 1 anti-virus running.
What is VIsta Basic (as opposed to Vista Home, Pro, or Ultimate)? A local retailer has the ACER 5516 laptop for less than $300, but it says it has Windows Vista Basic - that makes me wonder what features you don't get. Wht features will Vista Basic not have that Vista Home would?
In our Language School we have a Multimedia Language Lab (allowing the school students to access through user name and password an internet platform to do the exercise work after each class lesson). This system uses Windows Vista Basic as operating system and is based on a 802.11a/b/g Wireless LAN.
1.It is possible to create a Vista Install DVD allowing ??? in case of serious problems with the hardware on one PC ??? to format the hard disk and reload the Operating System, Configuration, Programs and LAN configuration (not exceeding 2 or 3 GB of disk space for the image) just by loading the Install DVD, without the need for calling any expert to solve the situation. I have to explain that recently a similar situation occurred and it took three hours of an expert???s time to reload the whole configuration and programs on the PC concerned.
2.If the answer to the above point is yes, what are the simple steps to follow to achieve what described at above point 1.
A friend found out that I have a Vista computer so he brought me his wife's computer to find out why it is so slow. I have no problems with mine but this Vista Home Basic PC is ungodly slow. Just to open an Explorer window takes over 90 seconds. I scheduled a checkdisk and ran it on the next reboot. I defragged and ran the disk cleanup wizard. I downloaded and reinstalled the ATI video drivers after seeing an eror message about ATI. It is slightly faster but not enough to make any difference to the user. Where do I find the diagnostics, or logs or something that can tell me what is slowing it down so that I can fix it? I couldn't find a diagnostic on the eMachine site. My last option will be to reformat and start over but I'd rather not do that if there is a way to fix it instead. It's an eMachine with only 512 MB RAM, but it did run much faster when new. Intel Pentium 3.0 GHz, 160 GB HDD. Also the wireless card is very slow, but the wired connection is pretty fast for downloading.
I've been browsing the forum watching several posts on Windows Vista and 4Gb memory issues, but couldn't find a solution. I have a Sony Vaio NR210FH. I upgraded memory to 4 Gb (2 x 2Gb). BIOS recognizes ok, but Vista Home Basic doesn't start. If I only use one 2Gb, it works ok.
I have a friend with Windows Vista Home Basic on his HP laptop, he has a valid key in the back of it on a sticker, it worked before, but after a reformat and reinstallation of Windows, it keeps bugging him that it's not genuine. We tried various command prompts found online to reset validation keys or stuff like that, we passed the phone activation successfully, but still there's no change.
Our family has 3 laptops running Vista - 1 basic and 2 home premium. One of the home premiums will not stay sleeping. Sometimes I have to make it sleep twice or even 3 times before it will appear to stay sleeping. But the next morning it is no longer sleeping. I have to unplug the Ethernet cable to be assured that it is not doing anything on the web. How can I correct this problem?
Is it possible to purchase a windows vista home basic product key on line? I'd like to validate an illegal installation (inherited). Couldn't see the facility on the MS web site. Or would I be better just to go to the store and buy the package (solely for the product key)
CANNOT SIMPLY UPGRADE WITHIN VISTA??? FIRST TIME ISSUE EVER POSTED! I have a question that I cannot make sense of. I have Windows Vista Home Basic with SP1 installed on my computer. I have a copy of a legit retail version of Windows Vista Ultimate Upgrade SP1 DVD-ROM. I want to upgrade my current Vista Home Basic to Vista Ultimate. Sounds simple enough. I have read everywhere on the web and it can upgrade easily as long as you upgrade within Windows Vista and not a reboot installation. Okay, but when I get to a point in the Vista grade process, I CANNOT! During the installation process, when I get to the screen that states, "Which type of installation do you want?" AFTER INPUTTING THE VISTA ULTIMATE KEY CODE ON A PREVIOUS SCREEN, the option should be "Upgrade" ONLY and NOT "Custom (Advanced)" since the key code is set for upgrade option only. I GET THE TOTAL OPPOSITE!!! I only get the option "Custom (Advanced)" and the "Upgrade" option is grayed out. WHAT??? NO "Upgrade" option??? I SHOULD BE GETTING THE "Upgrade" OPTION!!! This does not make any sense!!! It states at the reason at the bottom of this screen, "Upgrade has been disabled. - The upgrade option cannot be started, to upgrade, cancel the installation and then choose to upgrade to a version of Windows that is more recent than the version you are currently running." This does not make any sense, does it??? I should be able to only upgrade since I only have an upgrade disc. I am upgrading from a lower edition of Vista to a higher edition of Vista, therefore I should ALSO have this feature to upgrade enabled too when it knows my CD key is a higher ("upgrade") edition. I have spent several hours searching and read around the web and cannot find my same or similar case scenario. A first time! People who have upgraded between different editions of Vista with either the Windows Anytime Upgrade retail package or (mine) the Windows Vista Ultimate Retail Upgrade box (includes the Windows Anytime Upgrade anyways on it) say it is a breeze! What is going on with me??? I should not be having any problems what-so-ever!
I'm considering formatting my hard drive and then installing Vista. But during a test run I booted to the installation disk. After entering the Product Key I was told I needed to install form the operating system. So, I restarted and ran setup from my existing Vista install. I got to the 'Where do you want to install Windows' there was no selection at the bottom of the screen for Drive options to allow me to format. All that was there was saying 'If you need to make changes to this partition reboot to the installation disk'
