I have 2 HD's. One has XP Pro, the other Vista Home Premium. I want to dual boot. I got Acronis and installed it's OS Selector. It only seems to recognize the OS on the first drive. I tried making another partition on the XP drive (since that is the one I am not wanted to reformat at the moment). I have enough space showing, 63GB but I could only get it to make a small 7GB partition
View 6 Repliesi just got my 500gb Seagate drive back after it bricked from the little firmware issue they had. I also just purchased a 1TB WD drive. I don't really trust the Seagate any more and want to use the 1tb drive as a backup. I had backed up everything 6 months ago but it's amazing how much stuff you accumulate in 6 months time.
I am not too knowledgable in hardrives. Not enough to do anything complicated. Right now i am running Vista Ultimate 64 on the Seagate. Could i put another copy of Vista on the 1tb drive and just copy what i want over to it? That way if the Seagate dies again i can go right to the other drive. This will not be an external drive, just another bare drive in the bay. I realize i'm not going about it the best or most efficient way. Some people have explained better ways but most of it was over my head. I just want to be able to unplug the bad drive (if it goes bad) and continue with the other drive. So, would i run into any problems with Vista (not dual boot of course)on both my drives? Does it sound like this approach would work?
I have been loking but not finding instructions to install 32 and 64 bit Vista ( yes I have 2 seperate licensce -am not trying to cheat Microsoft). I had bought & installed 64 bit vista ultimate-however many devices and programs not compatible. So I bought the 32 bit version as well (i have an individual licensce for each version). SO in stalled the 32 bit version (wiped out the 64 as it interfered with the install). After a week of being on 32 bit, I find that I would also like to install the 64 bit version on a hard drive other thatn the 32 bit install.
I have scoured the Inet and MS sites but only see references to XP and Vista etc. Can anyone really help or point me to install instructions that will guide me on how to now install 64 bit vista so I can enjoy dual booting into either at BOOT? Please don't flame me for not being a genius...... but evrything I find is vague or does not adequately address the question.
I have been loking but not finding instructions to install 32 and 64 bit Vista ( yes I have 2 seperate licensce -am not trying to cheat Microsoft). I had bought & installed 64 bit vista ultimate-however many devices and programs not compatible. So I bought the 32 bit version as well ( i have an individual licensce for each version). SO in stalled the 32 bit version (wiped out the 64 as it interfered with the install). After a week of being on 32 bit, I find that I would also like to install the 64 bit version on a hard drive other thatn the 32 bit install. I have scoured the Inet and MS sites but only see references to XP and Vista etc. how to now install 64 bit vista so I can enjoy dual booting into either at BOOT?
View 7 Replies View RelatedI have built a new system to game with and have 2 new hard drives, on one I put XP Pro and then on the other I loaded Vista. I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular
Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while. I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there.
I am curious if Vista can be run from one of those portable external hard drives that I see in Staples, etc. rather than have to install another internal hard drive. I want to dual-boot with XP (already installed on an internal HD) and it would also be great if I can bring that external HD with us when we travel and hook it up to my wife's XP laptop and be able to boot up in Vista too. We need something for testing our software in Vista.
View 7 Replies View RelatedThere are many articles on how to dual boot Vista and XP, but I want to dual boot Vista and Vista, with an existing installation, on 2 Hard Drives. Currently I switch these in the BIOS, but I'd much rather chose at a later stage, can this be done? Why? Because I keep one of the drives for random software that I rarely use.
View 9 Replies View RelatedHad vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies View Relatedis it unheard of to dual-boot Vista x64 on a dual-core computer with x32 on an external drive (same software package)?
View 7 Replies View RelatedI have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedI built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies View RelatedI searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies View RelatedI have an Existing Vista install on HD1 and want to install Windows 7 on HD2.Was going to make HD2 the Primary Drive. Is there a way I can alternately boot to the HD1 Drive if I need to?
View 9 Replies View RelatedWant to set up Raid 1 for two identical drives, not boot. One has some data on it, other empty. Have vista ultimate 64. Do I have to reinstall?
View 4 Replies View RelatedI have a few laptops part of our domain. They are connected to a few network printers and mapped to a few shares. When the laptops are connected to the domain network they boot just fine. But when they are unconnected to the network the time from power on to login screen triples. And the time from login to functioning desktop also triples. I am thinking that this is a timeout issue where windows is trying to connect to shared resources that are unavailable. Is there ways to reduce the timeout threshold for these services? If so where?
View 5 Replies View RelatedI have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies View RelatedI wanted my computer do dual-boot with XP, so i made a new partition called F, and then i ran the XP CD and installed in F the CD. But now, when booting, it only shows Windows XP Professional. Have i accidentally formatted my VIsta? Because my programs from Vista are still there.
View 4 Replies View RelatedI would like to dual boot im running xp pro at the moment and wanted to add vista to. But i have never tried it before
Can somone show me a easy guide to do this please i have Symantec Norton Partition Magic 8.
I have Vista Home Premium on C:. There are a few programs that
won't run under Vista, and I've read that dual booting in easy under Vista.
I have a spare drive so I'm wondering, can I mount the spare drive and
install XP on it and use it to dual boot?
I first had Windows Vista installed on my "C:/" disk. After that I immediately installed Windows XP on my "F:/" disk. Remember that "F:/" is an whole other drive then the "C:/" drive! So all this went well without trouble. But then, as soon as I rebooted my PC I couldn't boot into Windows Vista and only Windows XP worked. Guess what; The bootsector of Windows Vista was either damaged or missing, I restored it using the 'restore-bootfiles' function from the Windows Vista DVD.
After doing so, I restarted my PC again, now Windows Vista worked fine but Windows XP didn't. The reason for this is kinda logical, Windows Vista uses another BootLoader than Windows XP does. The BootLoader of Windows Vista recognizes Windows XP but that's not the same the other way around. So basically it should work with the needed configuration. For (*trying to set up*) setting up a Dual Boot I used EasyBCD 1.7, but it simply isn't working. I made the following entries:
There are a total of 5 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Microsoft Windows Vista....
From what I am told Vista Ultimate's retail packages come with both 32 and 64 bit in the box. Is it possible to have these concurrently installed as a dual boot, or would they conflict with eachother. What if I were do do it on separate physical drives, disconnecting the other one before each install so that they don't detect eachother?
View 7 Replies View Relatedim trying to dual boot windows xp and windows vista when i start up my computer there was a screen that asked which OS i wanted to run and i had 2 options "Earlier Version of Windows" (WIndows XP) and "Microsoft Windows" (Windows Vista) But now my computer boots directly to vista without even asking me which OS i wanted to run. People are saying that Vista overwrote my MBR (master boot record) and now i have to modify the bcdedit.
View 4 Replies View RelatedApplication compatibility remains one of the most annoying issues for Windows Vista users. The ability to upgrade the software to a new Vista compatible version is not always an option. The company that developed the application may no longer be around or the cost to upgrade is too high. In my case, I have a lot of classic PC games that will not run at all under Windows Vista no matter how I configure the compatibility options. In order to play my old games I need to install Windows XP. However, I am not exactly ready to give up all of the advances in Windows Vista just so that I can play my old games once in a while. The answer is to dual boot Windows Vista and XP.
Dual booting Windows XP and Vista on the same computer will allow you to select from a boot menu what operating sytem you want to run. This menu is shown right after you power on your computer. Setting up both Windows XP and Vista on one computer can be a little ticky depending what operating system you have installed first. The next two sections will help you configure both versions on your computer, depending on what OS you have installed first:
Windows XP is installed
If you want to dual boot XP and Vista and XP is already installed on your computer you will not have to do much work to dual boot vista. Just boot to your Windows Vista install DVD, select a custom install and install Vista on a separate partition or physical drive than where XP is installed. This will leave your XP install intact and automatically install a boot menu with both XP and Vista listed.
Windows Vista is installed
If you were like me and compley reformatted your hard drive and wiped out XP when you installed Vista, your setup is going to be a little more complicated. Follow these steps:
Boot up your computer with a Windows XP install CD and install Windows XP to a different partition or physical drive than where Vista is installed. When the setup is finished, your computer will automatically boot into Windows XP. Don’t worry, Windows Vista is still on your computer if you correctly installed XP to a different partition or physical drive.
When you installed XP, the Vista Boot Manager was replaced by the Windows XP boot components. The Vista Boot Manager needs to be fixed by using the Windows Vista install DVD. Boot your computer to the Windows Vista install DVD , click Next on the regional settings screen and then click on Repair your computer in the lower left of the window. Select your Windows Vista install and then run the Startup Repair. This will fix the Windows Boot Manager and Vista will once again startup automatically....
I have 2 SATA 200gb hard drives and one is running vista premium and the other has nothing on it. I wanted to try the windows 7 so can I just install the windows 7 on my other HD and when I shut down my PC will it ask what HD operating system do I wnat to run? Is this how it works?
View 6 Replies View RelatedI'm wanting to create a dual boot for my PC. I would like to use 2 separate HDDs. One HDD has Vista Business (current) and the other proposed HDD will have XP. I would like to locate some good user-friendly instructions on how to do this by downloading from a web site, or maybe someone on the group has a set of instructions. Could someone assist please? Is there a good site on this topic?
I have tried Virtual PC 2007 but I cannot get the screen to enlarge to any extent. Full screen mode fails every time I try it. Anyway, I figure the twin HDDs would be the cleanest way to go. One more thing, I plan on upgrading the Vista installation to Windows 7 when released, would there be issues with the dual boot when installing Win 7?
I dual boot.
C: Xp Pro
D: Vista Ultimate 64
And I'm ready to make Vista my only OS. Is there a way to migrate, r copy, Vista 64 from my D artition to my C partition without re-installing? I have Norton Ghost 14. Which doesn't run in Vista 64, but it does run in DOS. And I suppose I can use the disk clone feature?
How do I make a dual boot drive for vista and windows 3.1?
View 9 Replies View Related