In the past I have had problems with Word crashing and was told to change my default HP printer for anything other than HP. I had done so and it still doesnt work correctly. Today I open a document and went to print it. My default was on an Ebson printer but this morning the default had changed all by itself to, get this, a copy of on of my HP printers. I look deeper and all of my HP printers have make copies of themself called (copy 1) I did not do this and I did not change my default printer.
I cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
I just got 3 vista PC into our current SBS 2003 network. What im seeying is that the printers will not stay or can even be setup as the default printer.
That's all Vista says when I print a photo. Why doesn't it see my default printer? I can download a third party viewer and print from it but it's a nuisance and I haven't found one I like.
I added a new printer to my system and now it seems to be the default. I want another printer to be the default but cannot find a means of changing the it. I know I have seen this somewhere but cannot remember where the setting is.
Every time I open Word the default printer has "disappeared". I get an error message saying the printer has not responded and asking whether I want to wait. This makes printing very, very difficult. Does anyone have a solution. I am using Vista Home edition, Office 2003 and the printer is an Epson D78. I have installed the new driver for the D78 and Vista. I have uninstalled and re-installed Word and the printer, but all to no avail
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
Dose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
Just installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
I just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
I have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
i have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
I'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
1 Vista Home Premium 32 PC 1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer: Connected via parallel to Vista 32 machine Printer is configured for sharing and is installed on both machines test pages print successfully from both machines
Additional notes: During printer setup on the Vista 32 machine, I attempted to install additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were identified successfully, and I added the network printer. I was not asked to install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs with normal speeds. Printing from the network computer Vista 64 using the shared printer installed on Vista 32 is extremely slow. Even typing in print job changes in the print dialog window takes 30 seconds or so for each key stroke to register a response onscreen.
I had a virus a couple of weeks ago and had it removed, but since the removal my computer won't open up any programs without going through default programs. If I click an icon on my desktop default programs pops up and I have to find the right program to open the programs with. I was reading some other posts and saw one that suggested that I download PC Medkit, I did it and it did not work. So now I'm out $40 and my computer still isn't functioning properly. Any suggestions would be extremely helpful.
I installed Chrome to give it a try and now when I set the default back to Firefox via: Start/Properties/StartMenu/Customize/Internet Link/Mozilla Firefox Chrome also pops up not Firefox. When I click on a web link from Windows Mail or Start/Favorites, the default web browser is still Chrome. How do I make my default browser Firefox again (Which is still installed as I never removed it)?
My problem is that I have a legal copy of goldmine 5.7 that I installedon this new laptop.In the installation there was a screen to type in my username and passord to access goldmine in the future....and I left them both blank.Now i cannot get into my goldmine program and when I uninstall it and reinstall it does not give me the opportunity to pick a new username and password. Vista has stored some default username.
I need to change the default ICS IP address 192.168.0.1 when sharing my Internet connection with other machines as I have an IP conflict with the cellular modem that I cannot change. Is it possible to assign a new network range for the dhcp server for the local network. If so, probably in the registry. Does anyone know of this?
I've been fiddling with this for more than an hour now and it's driving me nuts. After I installed Vista, I quicky set up WMP cause I wanted to listen to some music. Then a few days later I got around to installing my fav audio and video player (Foobar and KMPlayer). Both work but Vista won't let them open files by default. I tried setting them both as the default program for their respective extensions via in program preferences, but no go. Neither are listed under "Set your default programs". I tried disassociating WMP, but all the boxes under "Set your default programs" are greyed out and I can't change them. I CAN manually set each program (Foobar and KMPlayer) the default choice by right clicking a file -> Open with -> Always use this program.
This way, Vista opens that file with the program chosen every time, the icon changes plus, under "Set your default programs" -> "Windows Media Player" that extension that I changed no longer has a tick next to it. Also, the the empty box is now editable, meaning I can switch the asscociation back to WMP if I want. All other boxes are still greyed out. Both programs can also be chosen manualy for each individual file via Open with. But none of this is a solution. I want WMP to release it's hold on all of its asscociations. So does anyone know, how to disable all asscociations held by WMP so some other program can grab them? I've been at it now for like forever and I'm kinda fed up with it. If anyone needs any additional info, just ask.
Bought the above cable today especially for the UFC. Sorted the resolution out to mirror my laptop but the screen colour is a funny shade of pink! Anyone know of a way to sort this out?
how do i restore dpi to default from large?.my problem is that on large dpi the screen is too big to click on the bottom of the page to activate restore.
It use to be when I would open something it would put icons on the task bar on the right hand side. It would only show two at a time and you could Click the arrow to scroll through. All of a sudden it stopped doing that and it adds them on the left and shows all the programs. Any ideas how to get it back?
Referring to Microsoft Mail on Vista computer: I have two email accounts using MS Mail. A is my default account, B is not. When mail is sent to my B account, I can't reply to it. It sits in outbox with an error message. I can only reply to mail sent to A, the default account. Is there a way to set it up so I can reply to mail using both accounts?
