I just recently upgraded my XP system to a Vista 64 bit system. I print digital photos using Adobe Lightroom 1.4. With my XP system, I had a good match between my calibrated monitor (NEC 2690) and my printer (HP B9180) working in the ProPhoto RGB color space. I use ICC profiles and let the Lightroom application manage the color. With Vista, I've lost my match. Skin tones look great on my monitor and now print with a red tint. A blue sky prints with a purple cast. I tried Lightroom Beta 2 (64 bit software) but no difference. I played with some advanced settings in Vista's Color Management without success. I'm using NEC's SpectraView II calibration software which is 64 bit compatible. The graphics card that came with the computer is a NVIDIA GeForce 8600 GT.
I want to install sqlexpress which needs at least .net 2 SP2. So I removed my previosly installed Visual Studio 2003 and tried to install NET 3.5. No success. is there any way to install ANY .NET framework on Vista 64?
Vista Home Premium 64bit SP1. When I try to get into Storage -> Disk Management, it just sits there. At the bottom it says "Connecting to Virtual Disk Service".. I see NO disks listed, not even C:...
Having put together a new box and installed XP, it's time to decide how to proceed with Vista 64 in the same box. If you have a recommended approach to dealing with some of the issues for dual booting these two and have come up with a strategy that works (eliminates the restore point issues for example). Also, recommendations on using dedicated drives for eash OS versus partitions in a RAID-10 for each OS.
I am havein Vista Home Premium instaled on mu laptop. there are three partition on my Hard disk C: 31 GB D: 5 Gb (Recovery disk) E : 75 GB I wan to format my system and want to merge C: drive and E: drive as single drive. I have recovery disk with me.I dont bother if data is lost on either drive. I just want to reinsitall every thing and create single drive.
In Explorer I noticed that a folder C:UsersmynameAppDataLocalMicrosoftWindows Live Mail. the name text is a different color than the rest of the folders. The other folder the fore color is black and for this folder it's blue.
i just got a new computer yesterday that was loaded with windows vista home premium i had xp on my old computer i used pumpkin as my color scheme in xp how can i use the xp color schemes in vista
i don't know what happened but whenever i try to rename or make a folder in my c: the font color of name is blue. but in all other drives or user folder there is no problem.how can i change it?
My new computer has a SATA HDD and im trying to put in an old IDE HDD but when I hook it up I get get a blank screen after the BIOS loads for about 5minutes and then windows finally loads. When I do get into Windows (Vista x64) it doesn't see the drive until i go into Disk Management and rescan disk 2-3 times, then it doesn't see its partitions until i scan again, and then it freezes my whole computer and i have to hit the reset button on my case.
The IDE cable is also hooked up to a DVD drive, I don't know if thats a problem or not. Also are their IDE to SATA adapters?
Due to an Office Enterprise issue that can only be resolved with a clean re-install of Vista on an ACER computer rather than re-installing the ACER factory load I have bought a Full version of VISTA Home Preimum so that I can do a CLEAN install. I have 3 partitions on my HD C, D & hidden, the hidden contains the factory load. My plan is to run a full back up to D as well as copies of my files. I will also make copies of my files off computer. I do have the ACER recovery disks but I hope to never have to use them.
When I am all backed up I would like to format C, get rid of the hidden partition, keep D, put the VISTA DVD into the drive and do a clean install of VISTA on C . I could be wrong but I think that it would be best to format before putting the VISTA disk into the drive so there is no confusion between product keys etc. this is not an upgrade it is the same version that ACER supplied.
Do you use the web-based VMWare Management Interface to control your ESX server and have problems opening virtual machines in IE7? Many user have reported that instead of getting the open prompt in IE7 they get a find option instead. To fix this, you need to define the application/x-vmware-console MIME type so IE7 allows you to open the file.
Open up notepad.
Copy the text below into notepad:Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOTMIMEDatabaseContent Typeapplication/x-vmware-console] "Extension"=".xvm" ....
I recently installed Vista with on this machine with this new HD deatched though it had previously been used in this computer running xp. It is a IDE hard drive and although device manager recognizes it as a disk drive I cannot get windows explorer or disk management to notice it. It has a ntfs format.
when I go into Disk Management, my interal hard drive, external USB harddrive (Western Digital) and Disk Drive are all unreadable. I am certain it was fine when I first installed Vista as I formatted and partitioned both the internal and external HD. I have tried rescanning and resetting my computer, both to no avail. It is interesting to note that Memory Diagnostic Tool doesn't seem to want to work either...Microsoft only suggested rescanning and resetting, so I'm at a bit of a loss as to what to do.
I have a newly installed Vista64 Ultimate system. After clicking Disk Management in the Computer Management window the service never starts. Instead, the following launching information is displayed: Loading disk configuration information…..Any idea what might cause this strange behavior.
By a process too tedious to recount I've wound up with the following primary partitions on disk 0 of my laptop, a Compaq Presario R3275US with a 75-gig hard drive:
C: System (43 gig) D: Local Drive (15 gig) G: New Volume (15 gig)
Is it possible to combine the empty G with the non-empty D without erasing the latter in the process? If so, how can that be done?
In the past I can change the color of the fonts (red, blue..) with the color icon on the right of the fonts. (fat, italic, underline). Suddenly, now when I select a color, the color of the text do not change (black). I have verify the parameter, normaly they are good. For the text it's in HTLM.
I was wondering if someone could help me. I can't figure out how to make my color scheme stay in any particular setting. IE. I use WMP classic and it (I think) is not compatible with Windows Aero color scheme, so it changes automatically from Aero to Basic, then back to Aero when WMPC is closed.
That is not the problem, my problem is that I would like to just put the scheme back to Window Vista Basic, thus avoiding the need to change back and forth all the time. Everytime I reboot the scheme comes back as Aero.
This seems so simple, just select desired scheme, apply then once I logout or reboot those settings should save.
I have just recently installed Age of Empires III on my gateway vista laptop and the install went fine but when I play the game all the colors look like camera film negatives. Is there some setting to change to make the colors look normal? BTW it is an XP game if that has anything to do with.
i open a picture the display around the photo and picture have a noticeable yellow hue. All my drivers are updated, no conflicts. I'm running two displays and occasionally one of my displays is noticeably brighter than the other also. Not sure if its my graphics card acting up, driver issues, or an inherent vista FLAW.
I want know how to change the color of telnet client program. I tried to change the color by using the command . But the color f0 command change only the cmd windows, that is dos prompt window. By the command , the colsole color changed. But when I connected telnet server in the colsole, the color of it did not change. I tried another method to change telnet color, for example, , but only to fail. Is there anyone who knows how to change telnet client color when connected telnet server which supports IAC or ANSI. If there's any, let me know it. Anything is welcomed. If you use registry or by command argements, it will be helpful for me.
I created a new volume fron unallocated space. The volume seems to work fine. However in windows explorer the font is blue, not black. For all other volumes the font is black. Is this a problem? Why is the font blue? how can i chabge it to black?
My eyes are tired of this white-backgrounds-overdose in Windows Vista, and I would like to make them black. I think I can do it if I switch to "Vista Basic / Windows Standard / Windows Classic", but I would like to keep the Aero effects (transparency, etc.). Do you know if this can be done, and how? I've tried some visual styles, but all of them have white backgrounds. I guess a nice visual style with a black background would be the best solution, but I can't find one.
I can't remember how I changed the color in my received message from a specific sender. I was playing around and changed the color of my received messages from a particular sender. I would like to change other received message.
i want to put linux on my computer as a stepping stone leading towards my career and want to dual boot vista with linux unfortuneately i got 3 partitions in total. 1 that has EISA Configuration and an unknown 4.73GB (Healthy) partition, that i am unsure of what purpose it has because it has no info on it. I want to get rid of it so i have more space forlinux
I want to know that how can i increase my C drive. In the disk management it is showing 23.75 G.B. but in my computers it is showing 12.74 G.B. and apart from this i have F drive which is fully empty can i utilise it?
