whenever i put the computer to sleep, and when i resume it, the ethernet light on my tower goes off and i m no longer able to access the internet. When i restart, it works fine. I followed this tutorial and its not working.
View 6 RepliesI wonder if anyone can help me regarding this problem. Incidentally I have read and tried the suggestions on the sticky on sleep mode problems but I feel this does not match my problem.
I have the computer booted and then I can connect to the internet OK when I leave the computer and put it into sleep mode this works OK, however when I return and wake it up I cannot get an Internet or email connection and the only way is to restart the system. Can anybody give me any ideas?
I've searched here for this problem, and it seems that others have had it as well. I just got a new PC and it's running Vista. Each time I put it into sleep mode, when I come back, I have no wireless internet. I can either reboot or unplug the wireless receiver, either work, but it's a pain. Repair/diagnose does NOT work. For what it's worth, I had another PC, less than a year old, and it does the exact same thing. I just assumed that the old one was just wierd and my solution was to not put it into sleep. We do have a hard wired one, it does NOT lose connection when in sleep mode. My internet comes back just fine upon unplugging the receiver / replugging it. I have tried the solution I found..by unchecking the 'allow the system to put this device to sleep'..that did not work. the PC's are pretty DISSIMILAR in what they have on them for hardware, which leads me to believe it's a Vista thing. They don't even have the same spyware stuff..
View 7 Replies View RelatedI got a new Dell PC which has Windows Vista home premium, and I have a high speed internet service from AT&T, the problem I'm having is: whenever I put the computer to sleep,when I wakes it up, my internet connection is lost, and I have to restart the computer to get it to work again which so annoying to do.
I tried the: uncheck the (allow the computer to turn the device off to save power) for both the modem and the network adaptor which is Intel 82562 V-210/100, but the problem still exist, does anyone know how to fix this problem.
I want a second computer (which uses XP) to be able to connect to my internet connection. It CAN connect to the wireless network, but cannot see the internet. I have a Netgear wireless Router, and a security enabled wireless network. The other PC can connect to the wireless network with good strength, but cannot see the internet. In Vista's Network Sharing Centrethere is a properties box which deals with Internet Connection Sharing. But when I try to tick the 'Allow other users to connect through this computer's internet connection' box and click OK, I get a messagebox come upo telling me that 'An error occured while internet connection was being enabled'. Should I be trying to enable this? Am I doing this in the right place? if so what else do I need to do to enable the internet on the other machine?
View 9 Replies View Relateddoes creating a network bridge on my computer allow me to connect another LAN cable into a second device straight from my computer? because i want to connect my LAN cable into my PS3, but the cable is too short to reach the PS3. so i wanted to have it so the internet connection goes from my computer into the PS3. if thats correct, what component would i need to make it happen?
View 9 Replies View Relatedmy computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies View RelatedI have a very annoying problem with my Microsoft Wireless Intellimouse Explorer for Bluetooth. When after putting my computer in sleep mode the bluetooth mouse does not reconnect. The only thing I can do is pull the batteries out of the mouse and put them back in and only then it decides to reconnect.
I am running Windows Vista Ultimate 64-bit with the latest 64-bit MS Wireless IntelliMouse drivers. When logging onto the computer after completely shutting down the computer (not sleep mode) the mouse reconnects just fine.
I have an HP desktop running Vista Home Premium 64 bit and every time I try to put it to sleep, it appears as if it will sleep, but bounces back to life after a few seconds. My sleep options are set for "allow computer to sleep when..." And I'm allowing my computer to sleep under any circumstances. I have all the current HP and Vista updates installed and my drivers are all up to date.
View 3 Replies View RelatedSeveral days ago my computer refuses to go to sleep. I click the 'sleep' buttom and the monitors go black and it appears that it is going to sleep, then the motherboard clicks back on and my desktops appear again. This is happening on both of my dual operating systems (Vista and Windows 7). So, is my motherboard defective?
View 7 Replies View RelatedWhen I enter sleep mode my computer goes into sleep mode but immediately comes out of it again. This is both before I followed the steps in this tutorial and also after I have setup normal sleep as explained in this tutorial.
View 9 Replies View RelatedWhenever I put my computer to sleep, it doesn't actually GO to sleep. Rather, it's like if I had just locked it instead. The display stays on and it just goes to the Log In screen for vista. When my computer used to go to sleep, the display would turn off and so would all the LED indicators on my laptop, expect for the power indicator, which would blink on and off. Btw, I'm running a Dell Inspiron 1420 with Windows Vista Basic 32bit.
View 6 Replies View RelatedHow can I make my computer go to sleep. The option in the start menu is grayed out.
View 8 Replies View RelatedI'm trying to find out why my computer keeps waking up from sleep. Unfortunately I've not been able to track this down. I leave the house around 9am, don't get back home till 8pm, and the computer has turned on while I've been at work. My fiancee can't ever remember to check right when she gets home to see if it's on then or not, so I have no other time frame to deal with at the moment except for what happened today.
View 7 Replies View RelatedComputer refuses to go into sleep mode. When I force sleep by clicking the power button on the task bar the computer goes to sleep for about 5 - 20 seconds and then wakes up and stays awake. The cause; Installation of a gateway router from AT&T to provide TV and internet service. AT&T tech support claims no known issues with this router, yet the computer slept just fine prior to installation of this router, and if I power down the router the computer sleeps with no problem. This is not a solution since the router must remain powered up to provide TV service to my home. I have searched the internet for a solution, and have performed all the steps in the tutorial authored by Brink to no avail.
View 9 Replies View RelatedMy laptop has the same problem. I think it's something to do with the internet because when switch my wireless off it's going to sleep like it should be. If I'm connected to the university wireless it's waking up immediately. The same if I'm using the LAN cable. I suppose you guys will know what exactly causes it to wake up and tell me what to do so it wont be necessary always to switch wireless off when I want to put it to sleep.
View 5 Replies View Relatedwhen I'm trying to shut it down, my computer walks into something like sleep (tho I can't wake it from it) what exactly happens is: my monitor lets "beep" 3 times and goes black (as it usually does when it's turned off), but power LED on monitor stays green (after turning it off should be yellow) on keyboard num lock/caps lock/scroll lock legs keeps blinking power led on PC stays green all fans are working and I hear that HDD has stopped working (at least I think it is)
I've run safe mode and tried to shut it down from there, everything stays exactly same, with one exception monitor doesn't "beep", isn't going black, but stays on "shutting down" screen which is frozen (animation of "work in progress" circle has stopped) rest is as described above..............
The 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.
Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.
My computer (HP m9000t) freezes up after coming out of sleep mode. I have tried turning off sleep / hybrid sleep / hibernate, but the computer still goes into "sleep" of some kind. When it comes out of sleep, I can hear a whirling sound, which could be the harddrive starting up, but moments later it sounds like it spins down and stops, and then the whole computer freezes up, and I have to turn it off and then turn it back on in order to make it work again. I've tried to make it (using power options) so that the harddrive does not power down, but
that doesn't appear to do anything either, because the drive still turns off when the computer sleeps. Before this problem developed, I was having problems with the Media Center remote not working after sleep, and was also having problems with the usb ports, and the sound turning off.....................
My vista home premium workstation when sleep is selected the computer basically re-starts and does not go to sleep....I have no idea where to start looking for a solution.
View 8 Replies View RelatedI've found a few issues regarding sleep mode, but none that seemed to directly address my problem, so here goes: In the last two weeks or so, I've noticed that when I close my laptop's lid, the computer doesn't go into sleep mode, but instead hangs with a blank screen, and is completely unresponsive when I try to wake it up. The only way to fix it is to hold the power button to get it to shut off. However, this only seems to happen when my wireless network card (internal) is switched OFF. Even then, it doesn't happen all the time (i.e. sometimes it successfully goes to sleep, and wakes up again when I open the lid). It hasn't been a problem at all when the network card is on.
This started happening in late April, when two things happened (and they both happened at about the same time). First was that Windows Update automatically downloaded and installed a hotfix (946776) related to the computer crashing when the network status is changing. For what it's worth, I had never experienced the problem that the hotfix was supposed to correct. The other thing that happened was that I uninstalled McAfee and installed ZoneAlarm antivirus and firewall. I haven't been able to reproduce the problem 100% of the time, so I haven't figured out what sequence of programs running causes the problem (though it seems that iTunes and/or Windows Media Player is usually running when it happens). The first thing I tried was to use system restore and went back to before I installed zonealarm and the update. When I reinstalled ZA, Windows Update decided it was going to hurry up and download the hotfix before I had a chance to tell it not to. I uninstalled the hotfix (though it still shows up on the update history page, but not the list of installed updates), and the problem still occurred.......
so often I'll leave my computer on for several hours and come back to it and notice that the screen has turned off but it hasnt gone into sleep mode. this doesnt always happen there are time when my computer will sleep when its suppose to but I just cant figure out why it doesnt always do it. I have my screen saver to come on after 10 minutes the screen to shut off after 30 and its set to go into sleep mode in an hour but like last night when I went to sleep with my computer on and woke up hours later only the screen was off. does anyone know the cause of this?
View 4 Replies View RelatedI left my comp on overnight and now it has either gone to a deep sleep or hibernation and it wont come on now. I have an Acer Aspire L320 running on windows vista. Wheb i tried to wake it up nothing happened and now comp wont work. I have tried restarting, unplugging then starting, i thought i had tried everything but i am missing something. When i do try to switch the comp on again the fans make a noise then nothing, does this mean that something really bad has happened?
View 9 Replies View RelatedI have an old Dell Inspiron 2200 laptop running Windows Vista Home Premium 32bit, and I recently replaced the battery that originally came with it.
The new battery is good, it lasts about 4 hours on a charge, but Vista seems to be reacting to it very strangely. Immediately after I take it off AC power, Vista will alert me that my battery power has reached 99% and is critically low.
After that it'll run fine for about an hour, then when it hits 75% or so it will put itself into sleep mode automatically as if the battery was dead. After it's asleep, I can turn it right back on and it will run for an additional 3 hours before shutting down again (this time because the battery really is dead).
I've tried full-discharging the battery to calibrate it a couple of times, but it made no difference in the behavior. As far as I can tell the battery is fine otherwise (the percentage and time remaining that Vista tells me seem to be accurate), and the computer has no problems when it is plugged in to AC power.
This strange behavior happens exactly the same way every single time I run the computer on battery. Low Battery warning at 99% and false shutdown around 75%. After that it's fine. Any ideas what could be causing this problem?
whenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?
View 9 Replies View RelatedDuring inactivity my computer goes to sleep, actually it goes into a coma and can? it be awoken until I turn it off. And not by just turning it off at the switch, I have to unplug it and then restart it. At that point I get this message: The last attempt to resume the system from its previous location failed. Attempt to resume again? And then I have two choices; continue with system restore, or delete restoration data and proceed to system boot menu. The second choice is the only one that works. Why is my computer going into a coma, and how can I fix it?
View 5 Replies View RelatedI'm so glad i've found these forums, I just recently got a dell inspiron 530, Windows Vista. I recently did a factory restore on my computer and now everytime i put it in sleep mode, it wakes up after a few seconds without me touching it and I want to prevent it from waking up without my command. Also when I view videos in full screen on the internet, I have these two black bars that appear on the left and right of the screen, how can I get that off?
View 4 Replies View RelatedI have a laptop running Windows Vista Home Premium x64 with 340gb of extra memory, and 4gb of ram, and out of absolutely nowhere, I started to get this problem. I am the only user of this computer, guest account is disabled, and I'm the administrator.
Basically, I turn on the computer.
I login to my account. Great. Computer loads up as normal.
I close the laptop to put in my bag or something. By default, I have required to reenter the password to log back in once I open the computer again. BUT if when I type in the password to log back in, I get a message that says "Your Account Has Been Disabled. Please See Your System Administrator"
This happens if I log out of my account, or if I press switch user, and go back in my account.
I don't use internet on the laptop so I know I do not have any virus issues...I did run my virus scan once to make sure and it got nothing...
I suppose I could just require my computer to not need a password if I wake it from Sleep, but still, I shouldn't have to resort to that.
Does anyone else know what I should do? System restore maybe?
I'm having problems with Aero themes in 32 bit colors after computer resume from sleep/hibernate. Screen is messed up (see screenshot at [url]). I have NVidia GForce 6200 chipset card, and now I have Windows 7 Ultimate x64, but I had the same problem in Vista x64. If I move to 16 bit colors it solves,also with basic theme without Aero. I tried many drivers updates but nothing changed.
View 9 Replies View RelatedI put my computer to sleep it immediatley wakes up without pressing any keys or moving mouse. Same with Hibernate... I press hibernate it starts saving all info shuts off (power light off) within 5 seconds it is starting up again.
View 9 Replies View RelatedI have had a problem keeping my connection to the Internet. when I connect everything is OK until I want to use my browser and then I lose the connection from my server to the web (dialup connection)I am still connected to my ISP but cannot access anything from the Internet zone,It is shown only that I have a local connection only. I can ping my ISP and Ping the ISP's website. so it seems that I have a DNS misconfiguration, question is what do I start looking for?
Netcomm internal modem IN5920 and have tried a swansmart internal modem and a webexcel external modem with the same results. I can start to download virus defs Etc but will drop the Internet connection as soon as I touch the browser and be just left with a local connection. I have had this problem for over a month and have greatly increased Telstra's Australian coffers