I turned off User Account Control but in Explorer I still can't open Documents and Settings and a number of other folders. How can I configure Vista so that I can view any folder/file I want , as I could in XP ?
View 4 RepliesI apologize if this is a duplicate question- I have searched this forum and not found this topic. In WinXP, when selecting View Folders, I would see a closed folder, with 4 small images of the folder contents. I liked this as I instantly knew what images were in my folder. I am drilling down as follows: Documents, then the folders come into view. These are the folders I am discussing here. Windows Explorer gives the same results.
In Vista, I get a partially open folder, with the contents partially visible, but cascaded so as to obscure the contents under the first view. I've tried all the possible options I can find withing Vista, including Large Icons, etc. I have searched online for how to make the folders give me the preview pane as in XP, to no avail. I have tried numerous fixes found online, but they do not work. I may be using the wrong terminology, but I have spent two months trying to get the folders to display as in XP. Would someone here know a fix for this?
I have connected my Vista Laptop to my PC by ethernet cable and it does not allow me to view my shared folders on the XP machine. When viewing the network from the control panel the XP PC is listed but I get an error if I try to look at the files.
I get an error message saying MPFP Packet Inbound Filter plus the message also says it has tried to ping the machine but it is not responding. I am currently running McAfee security centre as my firewall.
I'm working in InDesign. I prefer for all my windows to come up in Detail view. When I "Open a File," the window comes up in List view. I can change that specific window to Detail, and it will stay that way, but I can't figure out how to universally change all such windows to open in Detail. Anybody know?
View 3 Replies View RelatedA multitude of files, folders and sub-folders have disappeared (all from my "Documents"). Miscellaneous sub-folders within folders have disappeared, while other sub-folders remain intact. At first I was completely lost, as the files were there not 30 minutes prior... After assuming the worst and thinking that they had corrupted or been deleted due to a virus, I:
- Made sure my folder options were set properly (I can view all hidden files)
- Thoroughly checked the recycle bin
- Did numerous searches
- Downloaded Google Desktop and searched some more
- Ran various "undelete" and "recovery" programs with no results
- Did a system restore...........
I was working on my laptop earlier this evening moving a few files around and organising my folders when I lost a few files from a folder. I don't know exactly what happened, I probably mashed the touch pad. Anyway, now I can't find the files anymore. I've tried running a search but it has come to no avail. How do I find my files? If it makes any difference the files were on a memory stick.
View 9 Replies View RelatedI have cd with all the pics from my son't first year on it. I don't have these files saved anywhere except for the cd anymore. I opened it once today because I got some more files that I needed to see if they were on it. There were some that weren't. So, I went to burn them and noticed that I actually didn't want some of the temp files waiting to be burned on there. So, I canceled it. Then I went to open the cd again to redo which ones I wanted to burn. Now, I can't view the files on the cd anymore. It just says drag files to add them to the disk.
When I right click on the drive in my computer I can browze with Infran that I have installed. But, not even half of the pictures are there. The disk was not made on a vista computer. But, I don't think that is the issue because it opened just before all of this happened. My dh also has vista and I tried to open it on his. It says the disk may be corrupt or needs to be formatted. I tried to format it. But, it says it will erase the files. Not that I know what it was before. But, right now it says that there is 89.9mb used and 612mb free. But, nothing will open when I open folder to view files. Please tell me the pics are not lost.
how is Microsoft recommending I view KHz (sample rate) on my audio files?
View 8 Replies View RelatedI have been having trouble networking my two computers. My XP computer can view files on my Vista computer, but my Vista computer cannot view files on my XP computer. I have been trying for weeks to fix this, but everytime I try to view my XP computer from my Vista computer I get the following message:"\Computer4 is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied.
View 7 Replies View RelatedIt is extremely frustrating to transfer all of my iphone videos taken on my phone to my pc and not have the still first second of the movie as an image so that I can know what they are and organize the movies. view thumbnails of .MOV files with VISTA so that i dont have to click on all of my movies to see what they are and organize them.
View 5 Replies View RelatedIs there any way for my to view 100% of all my files in one list or window?
View 3 Replies View RelatedI have Vista Home Premium and Windows Mail. How can I view multi-part files encoded with yEnc?
View 4 Replies View Relateddoes anyone know of a program that will allow me to view excel files without having to install the full version of office/excel?
View 4 Replies View Relatedis there any registry setting to fix the display of picture files (bmp, jpg...) in windows explorer (thumbnail view). I just installed vista and ACDSee (a few days ago) and just today noticed that picture files in thumbnail view have the ACDSee icon. can anyone send me the default (vista) settings for .
View 6 Replies View RelatedI'm facing this issue with some applications that needs to write some files on their installation directory... for example Yahoo Messenger creates some folders and write some files on its installation directory (e.g. C:Program FilesYahoo) for different reasons, like messages archiving.
These files and folders are created somehow and the application is able to access them correctly, but when I use Windows Explorer to see them they are not there! They are absolutely not hidden and even if they are I have the option of displaying the hidden files and folders enabled, and still I can't see them! I don't know if Vista has some way to store these file, but I couldn't even find them by searching!
This problem isn't specific to Yahoo Messanger as I faced it before with other application. One another example is eMule before that create Vista version that stores your settings and downloaded file in your Vista user folders instead of Program Files.
Certain files (like exe files) and folders (if they contain exe files) just can't be deleted. I get "You need permisson to do this". I'm the Administrator and only user of the machine. I tried activating and logging in a the "hidden" Administrator, but that didn't help at all.
I 've tried with UAC on and off. With it on I get the joy of clicking about 6 times before I end up with the "you need permission" (shouldn't that be checked first??) No wonder people turn that "feature" off.
I can rename the exe files and usually delete them after a reboot, isn't that very strange?
- Media Player was broken, but seems to work now, it actaully stops playing when you close it.
- I've been getting a "Parts of Logos has stopped working" or something like that error message at every startup for the last weeks.
- Sleep mode worked the first week only. Now it never wakes up.
- IE7 crashes at least once a day.
I've used XP for years and it was never this broken.
I can't move files(or folders) from one folder to another. I can delete, rename, create, and edit files, but I cannot move them. i.e. I select a file, ctrl x or c or right click and copy or cut, then change directory and paste it, and windows beeps at me and no pasting is done. Drag and drop doesn't work either, as it is the same concept. Now, if I move a file via command prompt as administrator, the file can be moved between directories, but frankly, I don't want to be typing out file names all of the time. My User Account is listed as Administrator when I check via control panel.
I can copy/paste text, so the clipboard is working. The read only box is checked on the folders but as I understand it, that's normal? I am listed as the owner of the files and I have "full control" over them. This problem is persistent throughout my entire computer, including all drives, and even USB flash drives. I have tried booting with the windows cd and repairing the installation.
The problem began because of me trying to tweak my computer using a tutorial. I'm guessing the cause was either disabling UAC or executing the "Net user administrator activate:yes" command in command prompt (probably the latter). I undid all changes I made to try to fix theproblem
I have enabled viewing hidden files and folders. Still, some folders and files are hidden from me! Here is an example: I navigate to eMule folder, which should contain Incoming folder, but does not. I start up eMule, go to Tools and select Go To Incoming Folder and the folder opens up normally showing the files I have downloaded. This problem also exists with a game I own. I'm not able to view the map files I have created with the game. Yet when I start the editor and choose to open a previous map file, it is nicely there in the folder it is supposed to be in.
View 5 Replies View RelatedWe have vista on both desktop (office-pc) and wireless laptop (daniel-pc) and a canon mp830 connected to the desktop pc. Desktop has macafee with firewall off and laptop had pc-cillin with firewall off. Both machines have identical sharing & discovery settings (no passwords), and the printer is shared. Both pc's see the other's files and printer. I plugged the MP830 into the laptop and let vista install the drivers.
When the printer is connected to the desktop pc, and I try to connect from the laptop, I get the 0x00000012 error. I then followed the advice in this forum and tried to create a local port on the laptop printer as \office-pcCanon830 and I get 'access denied'. Now, here's the thing, I plugged the printer into the laptop and tried to connect to it from the desktop. I clicked START, NETWORK, Daniel-pc and then right clicked the printer and clicked connect and IT DID. I then printed a document from the desktop to the printer connected to the laptop.
Next i uninstalled the printer from the desktop and then plugged it back in and let vista install the drivers as I had the laptop, thinking that perhaps there was a snag in the Canon software. I also downloaded the vista driver from Canon as I had done for the laptop. But when I tried to connect the desktop printer from the laptop, I once again got the 0X00000012 error. I've been round and round with this for a week and i must be missing some little thing.
I have a Dell Inspiron with Windows Vista. I logged in one day and found that all the zipped folders on my computer had turned into mp3 files. This includes all that I had created to store and send files via email and all that I received via email. I know that my son was using my computer and had accessed my Itunes. I have tried everything, including system restore, but nothing has worked. Can anyone tell me what happened and how I might re-convert these files to zipped folders?
View 9 Replies View RelatedI am having exactly the same problem as Thumbnail problem. Computer not generating them or something. - I have done all the things list here and I still cannot see any preview icons for any files or folders. Unless I use the list view which doesnt show previews anyway for picture or movie files. I have done a repair of Vista and that didnt fix the problem. I really dont want to start from scratch. I also cannot change my desktop image, and any file I try to upload wont change it.
View 9 Replies View RelatedI can't modify any files or folders anywhere on my computer. For example, if I create a new folder on my desktop, when I try to rename it the name still stays at 'New Folder' which I can't get rid of. Also I can't encrypt any files or folders. I am the administrator of the computer and there is no other users. I have tried taking full control of the files/folders on the security tab on properties and also using software like 'Unlocker' but nothing seems to work.
View 9 Replies View RelatedI'm trying to reorganize files, folders, and new drive and cannot find any way to move files from one drive to the new one. I've tried everything and a couple of new little programs that are supposed to give me "ownership". Nothing will work for me. Right now I'm trying to move my Audible Books from old to new drive and cannot. I can't even delete them! I've turned UAC off and no change. Vista has me stumped.
View 9 Replies View RelatedI am unable to view Hidden Files and Folders,From Control panel I have set the flag to show hidden files and folders, click apply and OK but when I go to the folder where there should be another folder with my files in it there is nothing, If I copy this folder to my USB hard drive and then look at it with another computer it shows the folder and files.
View 9 Replies View RelatedI have googled this to death and I have also search here and I have not found an answer. I am ready to migrate to Windows 7 and I am trying to move my wife's desktop items to another folder on another drive but I am finding this simple task annoying and impossible since all it wants to do is place shortcuts on the target folder.
I am trying to do this as an Administrator but no matter what I try, I get the same results. I am sure there is a simpler way to go about doing this but... I am also sure I can't find it!
id like to know how i may add my own thumbnail images to files / folders. example: i have a few folders with movies - i would like each file or folder to display an image of my choice of a relevant dvd cover or movie poster for easy navigating & aesthetics.
View 5 Replies View RelatedI am trying to find out how much disk space the various files & folders in my 'Documents' take up. I know how to get the size of individual files, and individual folders, but is there a way of showing the folder tree with the sizes of all files , folders, sub-folders ate the same time?
View 5 Replies View RelatedThey are connected through a wireless network set to private, with file sharing and network discovery and no passwords required. Both users are set to administrator with no password required. What I want is permission to transfer files or folders between the C drives of both machines.
I get as far as seeing these drives when I click on the computer's network location but then cannot gain access to the drive itself. I feel as if I'm close. I've trying playing with the permissions on both C drives and it looks like I've set everything I can.
I have Vista x64 Ultimate on my desktop and Vista x64 Home Premium on my wireless laptop. I’m trying to share files and folders. I believe I’ve done everything I needed to enable file sharing on both computers. All my Sharing and Discovery buttons are turned on except Password Protect Sharing. I added “Everyone” to my sharing list on both computers. Both computers have the same Workgroup name.
I don’t know how to access the shared files/folders from either computer. All the web sites I’ve visited tell me how to enable sharing but none of them tell me how to access them. It’s probably a simple process but I can’t figure it out.
I am not trying to move system files or folders. I am trying to move folders/files I created and copied over from my XP machine. When I check the properties they are read only. So I unswitch them get warned and as soon as I look at them again they are back to read-only. I have admin permissions so not sure what the problem is. I can delete the folders/files but I want to reorganize them. Is there a "Not a Newbie" version of Vista or maybe a tweak?
View 8 Replies View RelatedI have about 3,500 files, spread between about 1,500 folders, and I want to view all files at once in one big list. I was wondering is it possible to extract all the files from the folders and put them in one big list. I have windows xp.
View 7 Replies View Related