I have bought a new laptop which has VistaBusiness and is in my office domain. I am trying to access my outlok from home by connecting Cisco VPN but outlook shows disconnected. The same i do on my sony Vaio old notebook and it works fine.
View 4 RepliesI have a windows vista laptop. It connects to a linksys wrt300n router, which in turn connects to my dsl modem (speedstream 5200). DSL and internet connectivity is all working fine. I was able to establish my cisco vpn connection and interact with the remote machines up until apr 2, first thing in the morning. Today, I can still establish the cisco vpn connection, its just that I cannot get to anything on the remote network including the default gateway for the remote network.
View 7 Replies View Relatedmy work allows me to vpn in from home to remotely access my network files. unfortunately the cisco vpn software we have available to us does not install on 64 bit systems. and i've also heard does not even work on any version of vista.
View 6 Replies View RelatedI downloaded the NCP and Kaspersky detected it as a trojan. installed it anyways, as I need it and there is no way to configure it for my NAT/PAT network that we use. I am using the Cisco VPN on my lappy but I need it for vista x64. Cisco is NOT supporting it and the only VPN I have been able to try is NCP. Searches all over the net yield 0 results or bad bandaids like running VMs and rerouting everything. Is there a way to successfully connect using Vista's Built-IN VPN or do i have to downgrade to x86 and loose 1gb of ram?
View 5 Replies View RelatedI installed Cisco VPN Client 5.0010600 on my vista ultimate PC. No problem but when i try to maken contact with my work i get the error message: Secure VPN Connection terminated Locally bij the Client. Reason 418: Unable to configure the firewall software. Even disabling the windows firewall gives the same error.
View 4 Replies View RelatedI am trying to back up the configuration of a Cisco switch. I am using TFTP. After accessing the switch I try to ping and telnet to my Vista Business PC. I can't do either. I have Windows Defender turned off and I have shut down my Symantec Endpoint Protection. Under Windows features I have Simple TCP/IP services, Telnet Client and Telnet Server turned on. I also have TFTP client turned on. What might be stopping me from accessing my PC??
View 9 Replies View RelatedFrom what I am told, Cisco VPN client will not work with Vista and it is Microsoft's fault. Can you shed some light on this? Cisco is pointing the finger at MS, but it is their software that is causing the problem. Start Before Logon and Microsoft Certificate with Private Key Protect Fails Trying to connect the VPN client using Start Before Logon (SBL) and Microsoft Machine-based certificates fails. This is a Microsoft issue, not a VPN Client problem.
View 5 Replies View RelatedHas anyone seen or heard of a fix for the VPN client in x64? We had an end user at our office purchase a Vista Home Premium x64 laptop. Pretty nice machine but it fails when attempting to install the Cisco VPN Client. From what I understand, the only fix is to run a VMWare XP in 32 bit mode and install it there. At least this is what we had to get it up and running. This was several months ago and I'm hoping that Cisco has released a patch or new release for this.
View 9 Replies View RelatedI have downloaded the cisco vpn client v 5.0.03.0390. I have a secondary internet connection at work which is wireless. When my laptop saw this connection it came up with a pop up that asked me if i wanted to connect, i did then it asked me if this was a work, home or public connection i labeled it as work. I have been testing on this work wireless connection and ran the cisco VPN client and it was able to
connect.
Now i got home and the same wireless configuration pop up came on, i setup my home wireless and it again asked me if it was a work, home or public connection i choose home. Also, i have WEP running on my home network. My cisco VPN client keeps coming back with the following error: "Secure VPN connection terminated locally by the client. Reason 412: The remote peer is no longer responding"........
From what I am told, Cisco VPN client will not work with Vista and it is Microsoft's fault. Can you shed some light on this? Cisco is pointing the finger at MS, but it is their software that is causing the problem. Start Before Logon and Microsoft Certificate with Private Key Protect Fails Trying to connect the VPN client using Start Before Logon (SBL) and Microsoft Machine-based certificates fails. This is a Microsoft issue, not a VPN Client problem.
View 5 Replies View RelatedI try to access folders under my name (set up as administrator), most of the time I get access denied. It is driving me nuts. I want to change the start menu and get rid of a bunch of garbage but I can't enter the folder to do so. When I use the start menu program, it only has a few basic folders. This happens frequently, even when trying to view pictures or video in the folder. What do I need to change to remove this very annoying problem?
View 9 Replies View RelatedI have my laptop connecting to a server under AD control. My laptop is not joined to AD by design. I set up some files using 'Sync' to have them available to me offline. My AD password has since changed and I cannot connect to the server to have access to other files set up for offline access. When I attempt to remap the drive, I get an error stating I am already connected using the credentials provided. This is not true, since I cannot access the server. What do I need to do to fix this problem?
View 4 Replies View RelatedI think I might have a good one for you.. I am working on an Acer 5610z Notebook for a friend of mine. He was setting the parental controls and managed to control his account which had admin access. the user listing has the account listing as an admin but he only has standard user access. His was the "only" admin account.. While he was doing this he managed to deny access to the boot drive. The drive reads as "Access Denied". The machine boots up and a person can play games etc.. but network access is restricted.
View 8 Replies View Relatedi have recently tried to access Documents and Settings but am getting ACCESS DENIED for some reason yet i have done NOTHING to change my admin rights yet there seems to be an option for EVERYONE to access it but admin is not allowed to and it wont let me configure it that way. i have deleted EVERYONE from the properties and tried to revert to normal ADMIN user rights but it wont let me view docs and setts folder at all
View 9 Replies View RelatedOur Vista laptops (& my Xbox) access our basic Windows Home Server system through a Netgear router. It's all fine, but I want to (easily & quickly!) restrict & control when some laptops can access the internet while allowing free access to the server. (For instance, so children's internet access can be monitored but they can always get to photos & backups, etc. on the server.)
View 5 Replies View RelatedSearch tells me the file exists but will not tell me where. Access denied. "To access, click Security Tab"
Security Tab shows permission granted for Administrator and [User]. I am both User and Admin.
I ran Spybot S&D, got rid of any viruses it got and Mallware Bytes, again, removed everything. Even ran McAfee and got rid of whatever. But each time i run the scan on Spybot S&D it finds site that redirect me. I press fix selected items but it responds by saying "cannot access hosts file. Access is denied" I tried to untick the "protect hosts file form hijackers" in IE tweaks but keeps getting checked. On top of that the Hosts file is missing.
View 7 Replies View RelatedJust upgraded the computer by adding new motherboard, RAM, CPU and installing Vista 64 Home Basic. I cannot access my 2nd HDD in windows but windows can see it in the Device Manager and I can see it in my motherboards BIOS section also. Can anyone suggest a fix? I don't want to format the drive because I need all the info on there, that's why I had the second drive for storage.
View 9 Replies View RelatedI've developed an application that runs great on 32-bit Vista. But a user reports that when launched on 64-bit Vista it exits immediately with no error message. I don't have access to a 64-bit Vista machine to test with. Any ideas of likely places to look? I make many calls to the Windows SDK via [DllImport(user32.dll)].
View 7 Replies View Relatedi get the error message:
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'drivers license', Account: 'rlhenslee@yahoo.com', Server: 'plus.smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL): Yes, Socket Error: 10053, Error Number: 0x800CCC0F
i tried changing the outgoing mail port from 465 to 25 cause i think i saw in another persons post they were told to use that one, but i get the error message:
Subject 'drivers license', Account: 'rlhenslee@yahoo.com', Server: 'plus.smtp.mail.yahoo.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
I have 2 networked hard discs acting as fileservers in my local intranet. I have no access issues on any of my machines except the office PC running Vista (Home Premium 64)... on the Vista machine, even though I've added the IP addresses of the networked drives to my trusted zone, they show up in Windows Explorer as being in the "Internet Zone" and I can't seem to change that.
View 4 Replies View RelatedSo I turned on my PC this morning ( vista 64 bit ) and I could not connect to the internet. I hover my mouse over the little internet connection icon in the botom right hand corner and it says local access only. Has anyone else had this roblem? Is more information required (more than likely) jsut let me know. This is jsut another reason to have vista.
View 9 Replies View RelatedI just installed Norton Internet Security 2008. Now I can get into my
favorite URL but when I try to go back to the last page it locks up every
time. How can I get my favorite website with full functioning back again?
I recently set up WM on my desktop using my AOL email account information. I can view email in AOL until WM refreshes and the emails are visible there as well. However, if I read the AOL mail first, it doesn't make it to WM. I also set up my laptop with WM using the same AOL account but I can't seem to see my emails there, unless of course, I intercept them just as they come in. Is there a way to see ALL my emails on WM on either computer? I don't care if I can't use AOL anymore but do want the ability to see my emails regardless of which computer I'm using. Am I supposed to save to a server? If so, which is considered the server?
View 9 Replies View RelatedI read the "answer" post about UAC, and was wondering why when I set something to "run as administrator" in it's Properties it does not do so on an Administrator account? On the Guest account I have set up the program runs without asking for any kind of verification or admin password, but it always asks for such when run from the administrator account. What has gone wrong here? Is there some way to make a program "trusted" (like all Microsoft products) so that it doesn't ever need verification for all accounts on a system?
View 9 Replies View RelatedI'm about to get a new computer and I was wondering if there is much advantage to getting Vista 64bit over Vista32/or XP32 ? I would like to run extra RAM in my system and I know 32bit OS wont access 4gig or more but other than addressing more RAM what esle is a plus? I'm a litle worried as all the people in the computer shops tell me I have to stay clear of 64bit OS as there is too many problems and I can't use any of my current software/games. Can you put a little faith into my thoughts/choices. Also is Ultimate really worth more money than Home premium for the average person?
View 9 Replies View RelatedI installed Windows 7 on my laptop and realised my personal files were still encrypted using EFS.
I imported the EFS cert but its not letting me decrypt the files. It is telling me the users who have access is "1" which was my vista username.
How can I use the private key to decrypt the files?
I have looked at help files, I have searched all over the microsoft website, I have looked at previous question/answer topics from this section, but I cannot find out the answer to my problem. I have a laptop with Windows vista home premium, and a desktop with Windows XP Home. They connect through a wireless network. vista can access XP no problem. XP cannot access Vista with no problem: vista shows up in the
network places, when I turn the password requirement to share off in vista, I
can even access Vista from XP.
BUT: when I turn the password requirements to share on in vista, I cannot access my vista PC from my XP PC. HOWEVER: the original accounts on both computers have the EXACT SAME name, AND the exact same password, even the password hint is the SAME! STILL I cannot access my Vista PC from my XP PC.I have tried creating another account on both PCs with the exact same specifications, but even then as long as the password requirement to share is set as on in Vista, I cannot access the files on my Vista PC. Always, the error message that pops up is:.....
I own a website that has been transfered to a different hosting account however I still cannot access the site - everyone else can, including my partner (we live together and share the internet) but I still get the page that we put up saying that the site will be back soon, just changing servers etc. I'm using firefox - I've cleared my history, the cache and even deleted my bookmarks. I've cleared the cache using the command prompt and I've cleared out all temporary internet files. I've run out of ideas as to why I still cant get onto the site (which can be found here).
View 9 Replies View RelatedI can't get access to certain folders, everything was fine until my HD went KaPuT, so I installed a new dual 160GB raid system so I won;t lose it all again, the only problem is now that I reloaded Vista Ultimate I can't access anything, I have turned UAC off (my god what a mess that is, who thought up that POS?) and gave permissions and turned over ownership of everything to me, there is nobody else listed as a user in my system, yet when I use my AutoCad LT 2008 and try to access files, when I click on the directory I need to get into, it does nothing, I can get into other ones, but not any of the ones with little tiny curved arrows in boxes on the lower left. I have access of them in explorer, but not through LT 2008, HALP !! I need to get back to work and this is killing me, I am fairly knowledgable in puter stuff, but Vista is insane. up until now I have liked it, but XP is looking better all the time.
View 4 Replies View RelatedI don't know why, but I can't get microsoft.com to load. I keep getting this message:
Address Not Found
Firefox can't find the server at 'Microsoft Corporation'
[url]
The browser could not find the host server for the provided address.
* Did you make a mistake when typing the domain(e.g."ww.mozilla.org"insteadof "www.mozilla.org")
* Are you certain this domain address exists? Its registration mayhave expired.
*Are you unable to browse other sites? Check your network connection and DNS server settings.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I don't know how to fix this problem because it's never happened before.