Back up stopped working. Got the error message "Cannot find the sector requested.(0x8007001B)". I saw one reply that said to backup to C drive, but this is not an option on the setup page for backup. What next?
View 6 Replies
I've been trying to install First Defense-ISR Rescue on this computer and it won't install, it gets a -11 code and quits. The code means This means the boot sector is not a standard Windows boot sector. I have Windows Vista Home Premium 64 bit. My question is, if I remove the Recovery Partition D will this change the boot sector. I have factory backup DVD's and made my own DVD's, plus I have a TI image of the drive so I'm OK in that department.
View 4 Replies View RelatedI am using Vista Home Premium. I tried to back up my hard drive to a Western Digital removable HD using Vista Backup and Restore. The backup failed and I got a message that read: "The backup target drive G: failed with the following error: The backup disk has a corrupted file system. Fix it using the disk error checking tool or choose a different backup location. (0x81000008)" I cannot find "the disk error checking tool". I have backed up using this removable HD a couple of times already.
View 4 Replies View RelatedI cannot make a backup with Vista Home Premium 32bit. Whenever I try, I get this nondescriptive error: 0x80070002 and Vista claims it cannot find some file (But it doesn't say which one.) Also trying to adjust 'automatic backup' results in the same error. I cannot change anything in my backupsetting, I always get this error. So I cannot start a backup by hand, nor run automatic backup. This has been like this for months. My system has a RAID1 SATA array. I try to backup to an external USB drive (Lacie, formatted NTFS with enough diskspace). Is Vista backup broken beyond repair on my machine?
View 6 Replies View RelatedAutomatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies View RelatedThere is a link for activities on the Registry for XP and previous Windows, but I cannot find one for Vista. Will someone (with more knowhow than I) please advise me either what is the link, or tell me how to make a backup of the Registry. If I make a backup and then whilst removing unwanted files make a mistake, how do I activate the Backup? Will the activation of backup also restore the removed files?
View 9 Replies View RelatedVista SP1, 500GB disk, 3 partitions: system, data & other Used Paragon Parition Manager 8.5 to resize partitions (shrink system, expand data), rebooted and now can't boot. In System Recovery options get "Operating System: Unknown on (Unknown) Local disk". Open a command prompt and can only see the data partition. If I run Startup Repair, I get the following output:
Problem Event Name:StartupRepairV2
Problem Signature 01:System Disk
Problem Signature 02:6.0.6000.16386.0.0.0.0
Problem Signature 03:1
Problem Signature 04:65537
Problem Signature 05:unknown
Problem Signature 06:CorruptBootSector
Problem Signature 07:0
Problem Signature 08:1
Problem Signature 09:FixBootSector
Problem Signature 10:1168
OS Version:6.0.6000.2.0.0.256.1
Locale ID:1033
Looking at http://support.microsoft.com/kb/927392/en-us, if I try 'bootrec /scanos' I get 'Total Identified Windows Installations: 0'. Should I try the /FixMBR or /Fixboot options? If not, what else can I try?
I use a 160 Gb Seagate Momentus 7200.2 SATA HDD (ST9160823AS) in my Asus F3Sa notebook and I have the following problem : For security reasons, the encryption software I want to use check if the last sector of my HDD is readable before installing. As it says there is a problem, I wanted to check by myself using the following command : dd if=[harddrive] of=[output file] bs=512 count=1 skip=[total guaranteed sectors - 1]
Under Vista (see dd for Windows on Wikipedia), it returns an empty file, meaning that the last sector is unreadable. Under Linux, the very same command returns data without any problem. The last sector is perfectly readable. Thinking to a driver problem, I wrote to Intel (ICH8M chip) and they replied "We understand your concern but the problem you described is directly related to the motherboard or hard drive manufacturer, not chipset software". Very strange as the problem does not exist under Linux with the same hardware.
I wrote to Asus and they told to me to ask Seagate... I asked Seagate and they explained to me the problem seems to be software/driver/OS related. So... Now I'm stuck and I can't install my encryption software. What can I do. Could it be a problem of Windows Vista ? I use the latest computer bios, updated Vista and latest Intel chipset driver. The HDD health has been checked with a dozen of Linux or Windows tools. It's in perfect condition.
I run the installation and everything is going fine until I get an error message saying "windows cannot install requested files the files could be corrupt or missing error code 0x80070017" I'm using vista home 64 bit.
View 4 Replies View RelatedI use Windows Vista Home Premium and Int. Explorer 8.
When I sign into my ISP I get the following message: ???The webpage you
requested is not available off line.?
every operation requires UAC and a password (why?) under a domain. when trying to disable the uac i get: the requested operation requires elevation tried to elevate CMD but still get this message: the requested operation requires elevation. i can't login locally because i don't have the user password. any change to get this message out the way?
View 4 Replies View RelatedI was doing a sfc scan and this was what the screen said: " Verification 45% complete. Windows Resource Protection could not perform the requested operation " (end of quote). what are the possible reasons of only 45% completion, and what I should do to correct that.
View 5 Replies View RelatedI boot up with cd and do a Starup Repair but it stll gives me black screen with the mouse arrow. The details of the repair is of root causes 1 and all the error codes are 0x0 The last sentence it says Root causes found:- Boot status indicate that the OS booted successfully Reading throiugh this forum I also do a scannow at c:>sfc /scannow but it gives me a message that "Windows Resource Protection could not perform the requested operation" Just wonder what can I do next to get my vista going as it is still giving me the black screen with the mouse arrow.
View 4 Replies View RelatedI have the following problem which cannot fix for a few weeks now and growing increasingly frustrated: Sending emails always generates the following message: 'some errors occurred while processing the requested tasks'. The message then stays in the outbox and the contents of message are deleted. I then need to delete the message which goes into the deleted items folder.
However, the email does actually get sent which I've verified by i) checking on send server of gmail and ii) sending/blind copying myself which comes into Windows mail inbox in the normal way. I would greatly welcome advice on how to remove the error message such that outbox messages automatically go to the sent folder rather than generating the error message and the message contents completely disappearing.
The only workaround is to bcc myself on outgoing mail so that I have a record of what I have sent from WM which then appears in the inbox with the text intact. As background, I have installed the Vista and WMutil patch and run all the checks and tabs to no avail. I have had AVG anti-virus installed for over 1 year. The problem manifests itself consistently in different countries and for both ADSL and wireless so i've discounted this as an ISP issue.
I have used programs from MSDOS to Vista and by far Vista is the worst program of the lot. Maybe I am doing something wrong. Without exception, everytime I attempt to open a window, it takes for ever for the progress bar at the bottom to fillup and more often than not, I have to give up and start over. It is like it is stuck in a perpetual loop and just can't finish the requested task. I am paying for a cable modem and getting dial up results with Vista. This is fleecing of America. I recently had to purchase a new laptop and of course it had Vista. If the service pack does ever come and does not fix the issues with this crappy program, I would be in favor of filing a class action suit for Microsoft to either fix the issues or replace the program with XP which was great.
View 9 Replies View RelatedRunning under Vista Home Premium SP1. I just loaded Adobe Photoshop Elements 2 (which had been running previously under WinXP with 500MB RAM) into my new PC with 3GB RAM. It would not run and requested that I increase Windows Virtual RAM! Task Manager shows RAM with Total=2939MB, Cached=2080MB, and Free=20MB. My first guess is that the problem has to do with having an administrator and five standard users, four of whom are minimum-user kids and should be removed (along with the kids).
View 9 Replies View Relatedi was on Internet earlier today when i noticed that the videos were already completed buferring, but the videos were lagging; and firefox was performing kind of slow. i decided to re-start my computer. after re-starting the computer the logon process took extremely long, then an error message appeared: logon process has failed to create the security options dialog. failure - security options. i waited for the desktop to appear, then re-started again. but the perofrmance of the logon is still extremely slow. any suggestions?
View 9 Replies View RelatedI did a complete PC backup of my system onto an external USB HDD using the backup facility in VISTA Ultimate. When I went to do a complete PC restore I am told form the Help info on VISTA Ultimate to restart my computer, push F8 and choose the 'repair' option to run the restore. WHen I do this I get the safe mode options, debugging mode etc etc but there is no 'repair' mode. How do I get to the repair mode??
View 9 Replies View RelatedI have a 720GB internal drive that I've maxed out with automated weekly backups. I have another drive with a lot of space, and my question is, can Vista backup be set to continue the existing backup onto an additional drive. In other words, the backup files would be spread over two drives?
View 5 Replies View RelatedI have a HP M9200t running Home premium 64 bit that has a "HP Easy Backup" button on the front panel. When pressed, it runs a HP backup application.
View 8 Replies View RelatedI always use vista complete backup (Disk Image) to backup both my hard disks, but I am a bit confused as to the restore options. Basically, I have a sneaky suspition that one of the drives is going to fail in the near future, so I backup quite regularly, but when I replace it, I want to get a bigger drive, as it's only a 150gig raptor, and I really would prefer a 500 or 1TB 7200rpm drive for storage.
Can vista restore the files I backed up on D: (the 150gig) to a new D: which would be a large disk ? If it can, could I also do the same for C: which is where vista is located? If that doesn't work,
I have a simple text file with a certain word in it. I try to find this text file, but vista won't find it. Windows 2000, linked by network, finds it within a second.
I have tried all available options.
"include non-indexed"
"always search file names and contents"
"find partial matches"
"include subfolders"
etc
etc
It just doesn't work. Why is there not a simple search function that actually works like in windows2000? I am using Vista Ultimate 64 bit. But not having a working search function doesn't look that "ultimate" to me.
I've moved from Outlook Express on my XP desktop to Windows mail on my Vista laptop. I plan on moving to Outlook on both computers, but not until I get this folder thing straightened out. I was able to import my OE mail into Windows Mail ok. Then I had a hard drive failure on my laptop. I had backed up my mail files and I was able to restore my Windows Mail ok.
I had several "Recovered Folders", but they included everything. I moved all of my folders out of the recovered folders and placed them once more under the Inbox. Then I deleted the empty recovered folders.
Now I want to backup my mail, not using the Vista backup, but with a third party. So when I go into my Windows Mail folder in Windows Explorer, I find all of the "recovered folders" are still there. Now they're listed as Local Folders. I can't find the configuration of my folders as I see them in Windows mail at all. I have a "Backup" folder with a "new" folder inside of it with a windows file that is unopenable.
I'm using Vista Home Premium - I generally use Outlook 2007 for my e-mail and organising but recently went to Windows Mail to find a Newsgroup (unavailable in Outlook). However, no Newgroups were visible. Unable to find a way to find them I clicked on "Help" and the advice includes "Click the Tools menu, and then click Newsgroups." However, there is no "Newsgroups" option in the Tools menu that displays. The Windows Mail I have is version 6.0.6000....
View 9 Replies View RelatedWhen will Microsoft fix sfc /scannow? SFC (system file checker) returns a corrupt files found but cant fix message on new PCs. I reformated the HD and restored my Vista OS to factory. I tested a number of new laptops from various manufactures and they all have the same error message. I called Microsoft support and tier 2 support spent days then told me that the OEMs are messing up Vista. Did the OEMs add some spyware or modify the SFC utility? Why isn't there a fix for this very important repair utility?
C:Windowssystem32>sfc /scannow
Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 99% complete.Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log
I have two 500GB HDD's. I have installed vista on first one and I am using the second one for just storing my data. Today, I wanted to unplug the second HDD [depot disk] but after unpluging it my sistem gave me an error: "Disk Error: Please Insert System Dısk" Why? My OS is not instaled on that one. Then I pluged it and opened vista and saw the following picture:
Vista sees my second HDD [D:] as a system disk. What is the problem? Was vista installed on the other HDD also when I installing vista since they were both connected?
The connection to the server has failed. Account: 'pop.earthlink.net', Server: 'pop.earthlink.net', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 9 Replies View RelatedI getting a notification on the bottom bar right hand side saying backup failure. When i click on this, "Backup status & configuration" window appears, which says
The Backup did not complete succesfully
CATASTROPHIC FAILURE (0x8000FFFF).
So then if i try and do a a back up from control panel. a green bar appears and then go's red completely.
Finaly i get the same message on the bottom right hand side.
I have a 2 month old HP tx2 notebook. It activated fine when first booted. Used it abouy a month and IE crashed with a BSOD, and upon recovery I have a notice on the bottom of the desktop that it says this copy of windows in not genuine. When I reboot it says I must activate. When I try it fails and the only options are new product key or contact HP. I called HP and they said to use the key off the bottom of the computer which does not work. They then want me to do a complete reinstall which is quite unacceptible with all the work it took to get this new machine loaded to work with.
Can i buy a new license and be sure it is going to take. Buying a new copy of home premium unfair but is way better than all the work I would have to do otherwise. The OS is home premium 64 bit. I would not want to install a new copy because of the driver issues (touchsmart), I just want to use the key. When I try to activate I get: Buy new product key online. Try a different product key Contact Hewlett-Packard to help resolve this proble Have tried option 2 and 3 to no avail.
I would try option 1 if I could be assured it would work without loss of data. HP says to reinstall the OS. They told me Microsoft does not support OEM installs. Why not? There is no phone option. when I try to input a new key I get an 0xC004E003 error. Updates work fine and all my software works as well.The desktop background does not work and it has the not genuine at the right bottom corner. There does not seem to be a count down timer either.
I'm currently having a problem with my bosses PC. It will not boot into Vista. I have booted into safe mode and tried to rool it back to a restore point. This has not helped. I have also tried using Startup Repair on the Vista DVD which fails.....
View 6 Replies View RelatedWhen downloading video from a file sharing program, vista 64 will only allow 29 files to download all other files are blank ( ussualy 40 ) this program worked well and long with XP.
View 6 Replies View Related
