One of my computers screwed completely probably due to virus and I need to reformat. The problem is that I don't have the original xp install disk, I only have a copy of xp with dos boot, which does not allow a c: format command in dos environment hence I'm using ntfs for dos..I used to know the commands to the install/repair state this way but now I have completely forgotten.
View 4 Replies
Windows Xp does not recognize the NTFS partition. Any ideas on how to get at the files?
View 4 Replies View RelatedI have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
View 7 Replies View RelatedWith Windows XP using NTFS is it necessary to run Error Checking (Scandisk in Windows 98). I have heard that it's not necessary but articles I read say to do it monthly.
View 2 Replies View RelatedI was under the impression that XP would only work on NTFS? but my dads INstal of XP on his ACER is FAT32 why is this?
View 2 Replies View RelatedWindows XP Pro SP2. Was all the way updated, but I think the last update may have hosed me.When I turn on the PC, it fails to load successfully...eventually it comes up with an error that says that NTFS.sys is corrupt.I tried the last known good...didn't help.I can boot from the installation CD. If I go into the recovery console, it comes up to the c: prompt but it fails to read the directory if I run DIR. When I tried to copy the NTFS.sys from the installation CD, it doesn't allow it.I tried going through the install, but when I get to the point of installing it on the existing partition, it wanted to reformat rather than repairing the Windows installation...I would REALLY like to avoid reformatting the drive before I retrieve data if at all possible.
View 11 Replies View RelatedHad Win98SE FAT32, now have WinXP NTFS Save a lot of data on cd's. copied data to new system, it only reads some of the info??? What did I do wrong?
View 6 Replies View RelatedI'm upgrading to XP Pro from 98se and a question has popped up whether I should leave the current file system in tact or switch to NTFS. Can someone explain to me what the difference is and whether I should switch?
View 14 Replies View Relatedis there any advantage of converting my filesystem from FAT to NTFS?will it cause and problem to the existing data on my drive if i convert to NTFS from FAT?or if i convert back to FAT from NTFS if i dont like it??i want to convert drive e: to NTFS.but since i use both ME and Xp.once i convert to NTFS..i wont be able to access drive e: thru Win ME rite?
View 14 Replies View RelatedIn a Cnet course "Speed up your Windows" I participated, they highly recommend to change from Fat 32 to NTFS files, and I would like to know if its safe for me to do it by my own, and what risks do I could have in doing so
View 7 Replies View Relatedthe Systemax OEM PC we bought in 2006 had its Windows installation on a FAT32-formatted C: partition by default. I only noticed it this month, and after backing it up, I tried convert.exe based on what every-website-ever agreed on was the right instruction. Since it was running off of the partition it needed to convert, it asked me to run on the next restart, which it did. The process took at least 2 hours, but sometime in between the last time I checked up on it and when it finished, it apparently *undid* all the conversion it was doing, because the C: partition still read as FAT32.
View 8 Replies View RelatedI recently upgraded the hard drive on a pc that I had built and I am sure when I installed windows it was formatted with ntfs, when I installed and cloned to the new drive I noticed it was fat 32, is it possible for windows to change its format?
View 12 Replies View Relatedmy computer at the start up screen runs the check disk tool from windows.It should only try to run the tool once but when it starts up it says connot open or access the ntfs file.Also I tried to start my computer in safe mode today and it pulled upall the way to the black page where it displays the file names but it froze and never went any farther.
View 2 Replies View RelatedI recently switched back to XP after using Ubuntu for a couple years. I had no problems reformatting back to NTFS from XFS, no problems on install, but when I start up I have no sound, and no connection to the internet or to my other machine (which is also an XP machine).When I check the hardware my audio and ethernet come up yellow. I think the audio gives me a code 10 and the ethernet gives a code 28 (I could be wrong about the code 28 I didn't write it down). Now the really odd thing about this is that I put in my Ubuntu live CD and booted Ubuntu up, and right away I had audio and internet running straight from the live CD so I know the hardware must be good. I'm actually posting this from firefox running off of my live CD.I even tried installing a different ethernet card (the one I am using is integrated on the MOBO) and it recognizes it but won't let me get a connection.
View 1 Replies View RelatedI'm trying to convert my external hard drives to NTFS from FAT32.I have used convert f:/fs:ntfs.I am getting this message:"The type of the file system is FAT32.""Enter current volume label for drive f:"
View 10 Replies View RelatedXP installed recently is working well, but there's a problem. Startup was taking a long time, and once the black screen w/ XP logo came up, it soon went away and just left a blank black screen. This time I waited, and window came up saying system would do a disk check. It did so quickly, and message said "F" drive (external Seagate 160MB HD), is FAT32. When installing XP, I chose NTFS. There are many docs & files on the external HD. In addition to installing XP, also installed Office 2003, a newer version than what the word & excel docs on external HD were created in. Previous OS was WinMe, current RAM is 512, 1 MHz processor, Dell desktop. Once system did the disk check, it stayed on that screen, so I shut down, turned off the external HD, and restarted. Everything came up fine, and very quickly. Is it possible to convert any of the files on the external HD to NTFS? Or is there a way to access, edit those files that won't conflict with my new OS?
View 9 Replies View RelatedIs there a high quality free software that will safely shrink a NTFS harddrive partition? Please point me in the right direction.
View 8 Replies View Relatedi have an old computer that has xp pro and i would like to put windows 95 on it but i can not because the file system NTFS is not supported by win 95 how can i convert the file system back to FAT32 to be able to use windows 95 is there any free programs or something that can do that?
View 14 Replies View RelatedYesterday I upgraded my old computer to Xp, but I did so on only one partition, and I left It at FAT 32 just to see if it would work. Now Iam going to convert to NTFS because everything went fine and now I just want to free up space and reformatt the hard drive, basically getting rid of all the information on it and starting fresh. I just want to know if I can reformatt, and the steps for doing so if I can.I only have one partition on this computer that is why I am concerned about the reformatting thing. I tried to formatt when it was still FAT32 but it was saying that i needed to close all remaining things that were using this system.? I am going to convert to NTFS reguardless I just want to free up all my disk space that is being stolen from the old 98 system files.
View 7 Replies View RelatedHaving read the article found here...http//aumha.org/win5/a/ntfscvt.php I made the bootable floppy ( I hope) with BOOTITNG.EXE as suggested. The article then says I should boot this floppy...this is where I am stuck. I am a little hesitant as to how I can do this. I don't want to mess this up. The remainder of the instructions in this article seem so simple once I get past the 'boot this floppy' part.
View 11 Replies View RelatedConvert from fat32 to ntfs:From the command line: CONVERT C: /FS:NTFSHowever, the best way in my opinion is a 3rd party product such as Partition Magic (version 7.0 or later). Lets you do everything from within the GUI and it's a delight to work with. Without Partition Magic, this is a one-way process (you cannot convert back to FAT without a reformat)
View 9 Replies View RelatedIm doing a clean, brand spanking new install on a machine that has no floppy drive. I have switched around the boot sequence in the BIOS to boot the CD ROM first, and that recognizes the disc ok. Windows formats the unpartitioned hard drive to NTFS. At first I got an error saying the NTFS.SYS file was corrupt, so I wiped everything out, and began again. This time I partitioned the hard drive first, and it seems to want to go futher, and I no longer get the NTFS.SYS error, but when it begins copying files, it hangs at about 18 percent when it starts copying 'driver.cab' and I get a Blue Screen saying PFN_LIST_CORRUPT.
I already converted my HD from FAT32 to NFTS. I ran the "fsutil fsinfo ntfsinfo c:" and it shows my cluster size of 4096 KB. BootIT NG also confirms the 4KB cluster size.So..Is that all I needed to do? Is there an advantage of formatting a HD directly as NTFS? Is the convert command (with the 4KB cluster size) enough or will a re-format give better security, performance etc.
View 7 Replies View RelatedI've got a corrupted load of XP that will not boot up. Is there a way to boot into a DOS shell with NTFS support so I can see my files and then copy them to a second hard-drive. I used to do this often with 95/98, just add in a second(slave) hard drive and then boot with a DOS disk and copy the files to the second drive then I could format and reload the original HD. I haven't been able to do this with NTFS volumes, if you boot from a DOS disk you don't see anything
View 12 Replies View RelatedHow do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
View 3 Replies View RelatedBeen trying to reformat my harddrive, format goes well but it will only format it to the fat32 and i want it in the ntfs. now i have tried to convert using the cmd command butit tell me it will convert then restart and for a few seconds it will tell me that it is going to convert may take a few minutes then a few seconds later windows will start and its not converted over. i have the windows xp service pk 2 upgrade cd i tried using that but it never gives me a choice on wwhich file system to use. i know the option is there thou because i installed xp on my mother's as an upgrade from win me and it ask me if i wanted to convert.
I am using Win2000 on both my business laptop and my home desktop. On the desktop, because I loaded Win2000, I chose to use NTFS ... I was told that works better with a home network. The laptop came loaded and is using FAT32.Is there a benefit to switching the laptop over to NTFS and can it be done without losing all my files and being a hassle?
View 7 Replies View RelatedWhich one is better(overall performance,stability....) for installing WinXPsp2 ?
View 14 Replies View RelatedI am running XP SP1 with Fat32 and having a dickens of a time getting a full back up, I mave an 80gig hard drive backing up about 65gig to an external 80 gig with usb.If I want to sit in front of the screen for 5 hours, I may be able to get it done when I'm prompted to go to another media because of file size limitations.I have in the past used Ghost but have never had confidence in it and now get errors with it; something about files are not the same size. Recently bought Backup My Pc and babysitting it is the problem there.If I change my file structure to NTFS without a back up, is there any risk and will this solve my back up problem. I'm nervous without a backup.
I'm just curious if what is ideal for file system when formatting a hard drive is it NTFS or FAT32 the OS is WinXP Pro. Please explain it to me in a way that I can easily understand the difference and importance of the two. Many thanks for any replies.
View 4 Replies View RelatedI'm running XP Pro; recently acquired a new LaCie 500Gb ext. HD and trying to convert the thing from FAT to NTFS.Keep getting message"Incorrect Volume Label"
View 5 Replies View Related
