My 2005 hp pavillion is very slow. Slow to startup and slow internet connections.
I ran msinfo32 and looked at the Startup Program list in the Software Environment. There are too many things to list in this post (must be a couple of hundred items listed). Not sure how to determine if these items can be deleted or not. The list is too long to show here. Any suggestions? Thanks...
Here is a partial list .......
My startup time went up drastically.
I have disabled all but two of the automatic startup items using msconfig. My system used to start in less than two minutes, easily. Now it takes a more than a minute or two longer than that.
I know what the problem is; the only three items that show in the system tray after startup are:
1) The AVG Antivirus icon .
2) The Spybot SD Resident icon.
3) Local Area Connection (This is the icon which shows two computer monitors with screens that light up and go dark periodically)
Now, after the problem started, the last item, the Local Area Connection icon is the one that doesn't load, for VERY long. So it may be something to do with that. Also, just before the icon finally shows up(after which point the computer is fine to use) I've notice that a Windows security notification icon appears...it flashes, for just a second, and then is replaced by the Local Area Connection icon. For the record, these are the two icons I'm talking about:
http://i131.photobucket.com/albums/p282/sw1sh1/LAC.jpg
http://i131.photobucket.com/albums/p...tification.jpg
I have had my automatic updates disabled for a while now, so you might think that that's the reason the notification is showing up but I've already disabled that notification using Windows Security Center.
Try making my laptop less slow and not freeze all the time when doing the simplest of tasks.
However, my problem happens after trying to disable the Startup Items from the MSconfig dialogue.
-After I have unchecked the boxes I don't want, I click OK or Apply;
-It then tells me I have to restart for the changes to take place, so I do this;
-Then after completing its restart a message says that "The System Configuration Utility is in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts up."
-it then opens the MSconfig dialogue box again.
If I just close the utility or click ok, sure enough it keeps on opening every time I startup. Or else, what it's trying to convince me to do is to start up in Normal Mode. But I won't do this because then all the Startup Items I'd disabled become enabled again and the whole lengthy task was a waist of time!
How do you remove the "Common Startup" items from the startup list in msconfig for Windows XP? I did locate and remove the "Run" items that are located in HKLMSoftwareMicrosoftWindowsCurrent VersionRun.
View 6 Replies View RelatedHow do I create folders and combine like programs that show in "All Programs". I want to put all the various utility programs I have into one folder called "Utilities"?
View 1 Replies View RelatedWhen I log in to my computer It takes long time load up......the problem is that after everything is said and don I have aprox. 56 processes running. I do not have any programs in my startup folder. I know there is a way to stop all of these programs from starting up. So my questions are 1. How do i stop all these programs from loading? 2. What are the programs that have to run for windows to work?
View 2 Replies View RelatedI have a few unknown items in my Programs list. I am afraid to launch any of them to see what they are.
Acez SiteError
I.R.I.S. OCR registration
Remote Assistance
Software Setup
Printme Internet Printing
OS XP Home. How do you remove items in the add and remove programs section? Specifically I have a notification utility in there and I can't get rid of it!
View 14 Replies View RelatedI have a question about one of my startup items which is the rundll32.exe bthprops. I did a search but am still not sure whether I can uncheck this or not.
View 2 Replies View RelatedIn my laptop (Thinkpad R50e), I have my windowsXP preinstalled by IBMThinkpad but I noted that its quite slow, so I decided to check which s/w is running and so I goto start/run msconfig/startup , and I see the following but I do not know what are they. Can members tell me which startup items appended below that I can uncheck in startup tabs
ccApp
pwrmonit
BMMLREF
BatInfEx
tfswctrl
EzEjMnAp
hkcmd
ibmmessages
ibmprc
igfxtray
msmsgs
NeroCheck
QCtray
QCWLICON
S3Tray2
SNDMon
tp4ex
TPHKMGR
TpkmapAp
tp4serv
sgtray
Adobe Gamma Loader
Digital Line Detect
Microsoft Office
Windows XP Home, SP2
In the startup folders of the start menu, if the items are in the user's startup folder, they don't start up. If the item is in the All Users startup folder, they open twice. This is evident as well when looking at startup items in msconfig. If the items are in the user's startup folders, they don't appear in msconfig, but when they are in the All Users folder, they appear twice, once as "Common Startup" and once as "Startup"
When I boot up my computer, my startup items are not always starting up. I have checked the settings in msconfig and the ones that are checked are still not starting up. Any ideas why and what can I do to remedy the problem. I am running XP Home sp2.
View 4 Replies View RelatedI try going to msconfig and uncheck some things but could not do that. How to do this with xp home???
View 7 Replies View RelatedI have some startup items that I want to remove on my computer. I have used the msconfig to uncheck the boxes for these startup processes, but I then get a message when I startup about running in diagnostic mode. How do I permantly disable these processes?
View 1 Replies View RelatedI have a program 'stuck' in Add/Remove Programs.There is no button to remove it (no buttons at all actually).The program is Business Contact Manager for Outlook 2003.
View 1 Replies View RelatedIn my WinXPSP2 In msconfig, I have several items ticked and several items unticked. These unticked items don't load at startup, but I'm guessing the system still spends time checking that they DON'T need to be loaded. The system takes long time to start up. (Dont need to check hijack this & viruses, we've been through all of that on here already).
Nomally, in the Windows Current Version registry key there is an entry "Run" for those items ticked to start up and a key "Run -" where the non-starting up items are listed. However I don't have the Run - key, therefore I can't delete these items.
I suspect that previously when there were some items I wished to delete, I might have deleted the whole key rather than the individual items in it.
I thought this key would automatically be regenerated - but obviously not.
Can anyone help me - I'm not sure whether it's Run- or Run - with a space - and should it be in the local machine set, the local user set or both? Do I just type it back in & will these unticked items then appear in it? Or would only newly unticked items appear in it? How else can I delete these items that are unticked in msconfig which I wish to remove?
Do you ever uninstall programs and they are still listed under startup items in msconfig? Personally, I found myself with 30 such items from old installs. Microsoft leaves you no way to clean up this list, but have no fear, I have figured it out for you.1. Open MSconfig and click on the startup items tab2. Open Regedit and navigate to HKLM/Software/Microsoft/Sharedtools/MSconfig3. Compare the list of registry keys under startupfolder and startupreg with their counterparts in msconfig.4. Delete the keys which are no longer valid.5. You've cleaned up msconfig. they always tell you to back up your registry before doing stuff so I suppose I should say the same, although I assume most of you are somewhat proficient in windows xp it never hurts to be safe.
View 9 Replies View RelatedNeed Suggestions on Which Applications Can be Un-Checked (as listed by: MsConfig.exe application) for Windows - XP Pro
I installed Windows XP Professional on my unit and then ran the MsConfig.exe file, to check which processes / applications got loaded at Start-Up. The list is too big and quite difficult to figure out as to which items are good and which are useless.
I have created a WordPad file, wherein image files of Screens have been pasted. The two files are
MSConfig (Start-up items), Win 98 Pro, File 1.rtf 5,689,450
MSConfig (Start-up items), Win 98 Pro, File 2.rtf 4,734,281 ....
I have a long list of codes that appear under Start-up in MSCONFIG, and suspect they're slowing up my computer. Examples are CFSServ, ctfmon, and quttask. I used to know a website that lists such codes as things to keep or things to remove, but can't find it. Can someone tell me the name of sites that will do this for me?
View 3 Replies View RelatedMy OS: WinXP Home/SP2. How can I disable the following from loading at startup and appearing in my system tray: 'Vinyl Deck/S3tray plus utility/Windows Messenger' . Also how to disable 'Safely remove hardware' from startup. Msconfig does not show these items in Startup.
View 1 Replies View RelatedMy computer boots really slow, and when it's finished booting up more than half of my startup items have not started up. I'm running XP Home SP2.
View 4 Replies View Relatedwhen I went to MISCONFIG/System Config Utility, under the startup items, there are a lot of items, but few, if any, of the items I, in fact, have in my startup. My items still startup when I boot, but the list is not in Sys Conf Utility!
What happened to them? How do I get my working startup items bacK? I recently installed Process Explorer, a program which I found of no use to me. I have uninstalled it, and still the problem persists.
I have a crapload of services, and a about 20 startup items, but I don't know what to disable .
have a look at my hijack this log, and tell me what you think i should do.
I am using a pre-installed windowsXP in my Thinkpad laptop. I want to have a speedier start up and so I decided to goto start/run/msconfig/startup, to unchecked many items that are not used by me. However the start is still slow and I dont know much about services thats why I wont dare to touch "services".
View 6 Replies View RelatedI can delay the running of some startup items? As an example, MSN messenger runs and attempts to log in before my internet connection is active and therefore returns an error everytime I turn on my PC.I would have thought that theres a switch I could add after the shortcut command.
View 2 Replies View RelatedI know that when you have windows 98 and you type msconfig in the run then you click on the tab saying startup you can remove unnecessary things from loading that will only slow down your computer.But on windows 2000 pro when I type msconfig it says it is not there - what do I use to remove unnecessary things from starting up that are not kneeded to run the computer ?And what should stay there and load at startup so the computer has no problems ?
View 3 Replies View RelatedWin XP Home edition. I'm in the Speed Up Windows Startup class. I currently have a very long list of startup programs running. Is it safe for me to disable all except security programs (Symantec Norton,AdAware,Spyguard)?Charles
View 6 Replies View RelatedI have XP Home and am trying to delete some startup items using msconfig. Even tho my user account is the administrator account, it will not let me make any changes. It says I am not the administrator. I don't have any idea why it is saying this. I have tried to do things like this before and always get the same answer.
View 6 Replies View RelatedMy computer is really slow and it takes hours just to get to the screen where the User names are. Also when i enter my password and try to log in. The computer usually freezes after showing my wallpaper of desktop items. This is probably because I had installed a few programs.Is there a program or something to that I can use to boot my computer faster? I'm desperate also I really need to keep all the files on my computer on my computer. I have been having problems with my cpu being overheated. The CPU fan makes alot of noise.
View 13 Replies View Related http://www.bleepingcomputer.com/startups/
Check it out, this website has over 16306 startup items listed in it's database and gives you in depth details about each file and if it is needed or not. I feel it's a valuable resource for the moderators and any user here at techguy.org. It also has a lot of other useful information as well. BTW, this is not advertisement. Just a reference guide for anyone here who wishes to continue their education with helping each other.
When I uncheck items in my startup items list (start>msconfig>system configuration utility>startup) and reboot my system (running windows XP home edition) it comes back up with a message that it started in 'Selective mode' and to undo changes and start in normal mode. If I select normal startup the items are back checked. There are several items in my startup that I don't want started. How do I accomplish this ?
View 6 Replies View Related