I have a long list of codes that appear under Start-up in MSCONFIG, and suspect they're slowing up my computer. Examples are CFSServ, ctfmon, and quttask. I used to know a website that lists such codes as things to keep or things to remove, but can't find it. Can someone tell me the name of sites that will do this for me?
View 3 RepliesTry making my laptop less slow and not freeze all the time when doing the simplest of tasks.
However, my problem happens after trying to disable the Startup Items from the MSconfig dialogue.
-After I have unchecked the boxes I don't want, I click OK or Apply;
-It then tells me I have to restart for the changes to take place, so I do this;
-Then after completing its restart a message says that "The System Configuration Utility is in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts up."
-it then opens the MSconfig dialogue box again.
If I just close the utility or click ok, sure enough it keeps on opening every time I startup. Or else, what it's trying to convince me to do is to start up in Normal Mode. But I won't do this because then all the Startup Items I'd disabled become enabled again and the whole lengthy task was a waist of time!
In my WinXPSP2 In msconfig, I have several items ticked and several items unticked. These unticked items don't load at startup, but I'm guessing the system still spends time checking that they DON'T need to be loaded. The system takes long time to start up. (Dont need to check hijack this & viruses, we've been through all of that on here already).
Nomally, in the Windows Current Version registry key there is an entry "Run" for those items ticked to start up and a key "Run -" where the non-starting up items are listed. However I don't have the Run - key, therefore I can't delete these items.
I suspect that previously when there were some items I wished to delete, I might have deleted the whole key rather than the individual items in it.
I thought this key would automatically be regenerated - but obviously not.
Can anyone help me - I'm not sure whether it's Run- or Run - with a space - and should it be in the local machine set, the local user set or both? Do I just type it back in & will these unticked items then appear in it? Or would only newly unticked items appear in it? How else can I delete these items that are unticked in msconfig which I wish to remove?
Do you ever uninstall programs and they are still listed under startup items in msconfig? Personally, I found myself with 30 such items from old installs. Microsoft leaves you no way to clean up this list, but have no fear, I have figured it out for you.1. Open MSconfig and click on the startup items tab2. Open Regedit and navigate to HKLM/Software/Microsoft/Sharedtools/MSconfig3. Compare the list of registry keys under startupfolder and startupreg with their counterparts in msconfig.4. Delete the keys which are no longer valid.5. You've cleaned up msconfig. they always tell you to back up your registry before doing stuff so I suppose I should say the same, although I assume most of you are somewhat proficient in windows xp it never hurts to be safe.
View 9 Replies View RelatedNeed Suggestions on Which Applications Can be Un-Checked (as listed by: MsConfig.exe application) for Windows - XP Pro
I installed Windows XP Professional on my unit and then ran the MsConfig.exe file, to check which processes / applications got loaded at Start-Up. The list is too big and quite difficult to figure out as to which items are good and which are useless.
I have created a WordPad file, wherein image files of Screens have been pasted. The two files are
MSConfig (Start-up items), Win 98 Pro, File 1.rtf 5,689,450
MSConfig (Start-up items), Win 98 Pro, File 2.rtf 4,734,281 ....
My OS: WinXP Home/SP2. How can I disable the following from loading at startup and appearing in my system tray: 'Vinyl Deck/S3tray plus utility/Windows Messenger' . Also how to disable 'Safely remove hardware' from startup. Msconfig does not show these items in Startup.
View 1 Replies View RelatedI have XP Home and am trying to delete some startup items using msconfig. Even tho my user account is the administrator account, it will not let me make any changes. It says I am not the administrator. I don't have any idea why it is saying this. I have tried to do things like this before and always get the same answer.
View 6 Replies View RelatedWhat I want to do is this:
When I go to START>RUN>"msconfig">startup tab I have many listed entries that I know are no longer needed on my computer, but have yet to find a way to delete them.
For example: My mom wanted me to download this TalkingBuddy program for my son, I did it, thought it was stupid so I uninstalled it. To me all components should be removed from the computer. However, when I go to START>RUN>"msconfig">startup tab I still see an entry for TalkingBuddy that can be checked to run at startup.
There are several other entries like this that I know I don't need and would like to know how to remove them. I also suspect that there might be some entries on there that look like they are needed but actually belong to other uninstalled or deleted programs.
Secondly, if anyone knows how to find and remove files that go to programs that linger around after you have uninstalled the program can you please tell me how to do that also. By this I mean for instance, that I have uninstalled Norton and now use Mcaffee, but there are still files that belong to symantec on my computer. I suspect that there are many other useless files from programs no longer on my computer that can also be deleted as well.
Running XP-Pr0-SP3 on a standalone home PC with 4GB RAM, 300 GB HD split 3- ways with OS on the 'C' drive, a 64- bit processor and TELUS high speed Internet.
Recently having replaced the mouse with a Logitech Wireless and not having had it start up, I read in the Logitech forum that a workaround would be to go to MSCONGIG and uncheck everything, re- start, then re-check the items I wanted to start up and re-start.
i then check all items in the startup tab and run a normal startup instead of selective.
I did this and now both Logitech and my Webshots program do not start at startup. Is there a workaround or possible change of permissions that I need to do to resolve?
I know that when you have windows 98 and you type msconfig in the run then you click on the tab saying startup you can remove unnecessary things from loading that will only slow down your computer.But on windows 2000 pro when I type msconfig it says it is not there - what do I use to remove unnecessary things from starting up that are not kneeded to run the computer ?And what should stay there and load at startup so the computer has no problems ?
View 3 Replies View RelatedI want a program to run at startup and I want to be able to change what I have done at any time.
There are a number of unchecked entries in msconfig and I have to use Selective Startup all the time.
If I want to revert to Normal Startup under the General tab instead of Selective Startup, the program's box automatically rechecks itself in Startup.
The Startup tab gives me a handy record of what I did and allows for an easy change of mind so long as I continue to use Selective Startup.
If I edit the Registry to stop programs running at startup, they won't show in msconfig and I lose the handy record of how it was and I may have to reinstall the program to go back to it running at startup.
I would like to accomplish this:
1. Use Normal Startup instead of Selective Startup.
2. Have some programs not run at startup, but be able to easily change back to having them run at startup.
3. Have a readily accessible list of those programs and the details as shown under the Startup tab as a reminder of how it was without having to manually enter it all into a text file or keep a notebook or reinstall.
Is there some way to use Normal Startup, stop programs running at startup, but retain or find a list of those programs (including the details under the headings Startup Item, Command, Location) that is shown when using Selective Startup with unchecked boxes under the Startup tab?
To put it another way, use Normal Startup but somehow retain the convenient flexibility of Selective Startup.
I think I might need to do this.It's now impossible to click or d/click on a programme or even an email and have it open I have to click 6-10 times before the little hourglass appears.I think I need to change my startup : what do you think? Msconfig shows my startup options to be -Normal Diagnostic Selective
Ought to to choose diag?Or Selective?because I can't decide which programmes I ought to remove and which to leave in, but I'm sure I have too many.
My startup time went up drastically.
I have disabled all but two of the automatic startup items using msconfig. My system used to start in less than two minutes, easily. Now it takes a more than a minute or two longer than that.
I know what the problem is; the only three items that show in the system tray after startup are:
1) The AVG Antivirus icon .
2) The Spybot SD Resident icon.
3) Local Area Connection (This is the icon which shows two computer monitors with screens that light up and go dark periodically)
Now, after the problem started, the last item, the Local Area Connection icon is the one that doesn't load, for VERY long. So it may be something to do with that. Also, just before the icon finally shows up(after which point the computer is fine to use) I've notice that a Windows security notification icon appears...it flashes, for just a second, and then is replaced by the Local Area Connection icon. For the record, these are the two icons I'm talking about:
http://i131.photobucket.com/albums/p282/sw1sh1/LAC.jpg
http://i131.photobucket.com/albums/p...tification.jpg
I have had my automatic updates disabled for a while now, so you might think that that's the reason the notification is showing up but I've already disabled that notification using Windows Security Center.
How do you remove the "Common Startup" items from the startup list in msconfig for Windows XP? I did locate and remove the "Run" items that are located in HKLMSoftwareMicrosoftWindowsCurrent VersionRun.
View 6 Replies View RelatedI am trying to clean up some startup items and when i go to run msconfig the hour glass comes up for a second and then it goes away but nothing happens
View 3 Replies View RelatedDell XPS T450, 576 MBWindows XP Pro OSI'm trying to make some startup changes using msconfig.exe and services.msc from the run command line. Despite running under an administrator login, I get a message to the effect that I don't have administrator privileges to run these commands.
View 2 Replies View RelatedI open the System Configuration Utilility, go to the "Startup" tab, click on a program I no longer wish to run at startup and get an error message stating: "An access denied error was returned while attempting to change a service. You may need to log on using an Administrator Account to make the specified changes".I then click on OK to the error message and then the text box pops up stating the usual "You must restart your computer for some of the changes made by System Configuration to take effect". "Restart" - "Exit without Restart".
View 8 Replies View RelatedWhat do I need on startup list at msconfig What needs to be running It takes to long to load at startup
View 8 Replies View RelatedI have got windows xp.I don't seem to have all the necessary things in my startup menu. In fact I've only got 4 things in there and they are programmes I have installed. This I think has resulted in me having "no audio devices" in the control panel.
View 8 Replies View RelatedI have a Windows XP Home installation and the main account is set as an administrator account.when we log into this account the command prompt window is displayed, but not with a c prompt and there is nothing we can do to exit it (i.e unable to type exit)
On looking at the startup options in msconfig, which is what's causing the command prompt window to open:
Startup Item: svchost
Command: C:windowssystem32driverssvchost.exe
Location: HKCUSOFTWAREMicrosoftWindowsCurrenVersionRun
So using the account that is in the administrators group I tried to deselect it but when clicking Ok or Apply I get this message:
Error: An Access Denied error was returned while attempting to change the service. You man need to log on using and Administrator account the make the specified changes.
But I am using an Admin account...!?!?
So I tried rebooting into safe mode, then as the 'Official' Admin account to change it but when I login as the Administrator the svchost isn't in the start up options?
There are a couple of other accounts that are just standard accounts and they don't have the svchost on their startup.
I recently began having problems when restarting- 90% of desktop icons were gone,replaced with generic program icons then, after a few seconds, windows explorerwould crash. When starting in safe mode the icons reappeared , so I used msconfig /selective startup to quickly determine the cause. It's in a file called *[annie] with the item *'Frame Rate=666666' the apparent culprit.
View 3 Replies View RelatedIf you have too many things checked on the startup menu when you run msconfig it will slow your computer down.While I can figure some of those things out, there are a lot of them I have no idea what they run. How can I find out what is neccessary or not?
View 4 Replies View RelatedTwo of the entries right before the unchecked items are in another language. It looks like japanese code to me. How do I get them back in english so I can see what they are.
View 14 Replies View RelatedWhen I log in to my computer It takes long time load up......the problem is that after everything is said and don I have aprox. 56 processes running. I do not have any programs in my startup folder. I know there is a way to stop all of these programs from starting up. So my questions are 1. How do i stop all these programs from loading? 2. What are the programs that have to run for windows to work?
View 2 Replies View RelatedI am having a problem accessing startup (msconfig). I am running Windows XP Home SP2. I had this problem once before in the past and I reinstalled Windows to fix the problem. Is there any other way to fix this without having to reinstall Windows again? Error Message: Windows cannot find 'msconfig'.
View 2 Replies View RelatedSystem Configuration Utility (startup tab) I have an entry, which specifies a location of HKLM SOFTWARE Microsoft Windows Current Version Run There is no startup item or command visable, what is it and how do I get rid of this entry if it's invalid. Or is this a valid entry?
View 5 Replies View RelatedWhen i try to use msconfig to turn off several startup programs, no matter what I chose, when I click apply and ok, and close msconfig, and then open msconfig again, all the programs i tried to turn off have a tick by them again... there seems to be some junk programs there - i use AntiVir Guard as virus protection, so I guess it's unlikely to be a virus
View 1 Replies View RelatedWhen i try to use msconfig to turn off several startup programs, no matter what I chose,when I click apply and ok, and close msconfig, and then open msconfig again, all the programs i tried to turn off have a tick by them again... there seems to be some junk programs there - i use AntiVir Guard as virus protection so I guess it's unlikely to be a virus
View 5 Replies View RelatedI am using Netflix's new media player to view flix online.Problem is, my CPU usage is hovering at round 90% as I watch them.I know that there are unessential services in XP that start at boot time and was wondering which ones I could disable so as to avoid crashing my laptop while view a movie.
View 3 Replies View RelatedI want to free my computer of unwanted startup items, BUT, I can't tell what these things are? Is there a way to get more information other than what is shown here?
View 9 Replies View RelatedI have a question about one of my startup items which is the rundll32.exe bthprops. I did a search but am still not sure whether I can uncheck this or not.
View 2 Replies View Related