Is there some software that I can use to check my system for software/hardware compatibility? And/or is there a way that I can find out if there are software/hardware conflicts within my system?
View 3 RepliesAt least I'm pretty sure there's a .exe conflict issue here.
My explorer.exe does not start up when I restart the computer, then when I run it through the task manager it starts up for about three seconds then the desktop items and everything disappear again. I also never receive an error message with the explorer.exe crash. No "sorry, but the explorer.exe must close ect ect."
I just recently installed a new DVD burner recently and now when I run my BackUp program, it crashes. I checked and it said both the BackUp program and the new DVD burner are both on the same driver. Does this make sense?
View 5 Replies View RelatedI've joined a bulletin board for financial stuff, and they're starting a chat room using something called OmNovia, which requires downloading Microsoft's Activex program. I vaguely recall people having nightmarish conflicts and difficulties after installing Activex, but that was a while ago. Does anybody have any feedback? I need to keep my regular chatroom (the popular Hotcomm program) functional, so if there Activex has the tendency to usurp your computer's resources or prevent competing software from running, I'll just pass on the OmNovia/Activex.
View 3 Replies View RelatedAfter 5 hrs, 40 min. of updating today, MS tells me there are still Hardware and Software conflicts regarding SP3.
View 14 Replies View RelatedMy PC is having serious problems every time I try to do anything with bitmapped graphics--even using emails that require downloading graphics.
View 3 Replies View RelatedI am using windows XP home edition with office 2003 professional on a Toshiba dynabook. I want to uninstall or disable the Microsoft movie maker, as it is interfering with my professional Adobe Premiere Pro software. I have found no say to this. Every time I plug in my i-link DVD tape drive, I get the absolutely annoying, pop window that asks which software I would like to use to capture from the DVD device. Unfortunately the software I want to use is not listed! I have selected no program and the use for every time check box.
View 5 Replies View RelatedIf you have Internet Explorer 8 and Service Pack 3, can you get conflicts if both are installed? I have had lots of conflicts, like freezing up and slow loading. To fix it, I had to revert back to 7.
View 1 Replies View RelatedI was reading about some of the built in diagnostic tools in winxp and found out about msinfo32; I ran the program and found that some devices are either sharing resources or are conflicting with each other.
Is there any way to tell whether or not it is ok for these devices to be sharing resources
here is another a high jack log. Im curious what you all think. my friends computer is acting strange and here is his log file. sometimes the keyboard doesnt work . then a reboot fixes that. every time he starts up the norton go back program tries to ask if it can repair the drive
View 1 Replies View RelatedGot to device manager in safe mode and video adapter appeared to have conflicts with USB device. Attempted to resolve. Must have done something wrong, can't get close any more Normal boot gets ''1. Analog Input - can't display this video mode Safe boot gets hung at multi(0)disk (0) rdisk (0) partition(2) windowssystem32driversagp440.sys Dell Dimension 8300 SeriesDell 1901 FP Color Monitor 1 SATA drive, not partitioned Windows XP Home Naturally,not backed up!
View 2 Replies View RelatedI'm not sure if I'm posting this in the right section or giving too much information at once. I have several issues that I need assistance with so I'll post them and you can take it from there and let me know where to go or post differently. I apologize for all of the questions. If you would like for me to break them up and post differently
View 13 Replies View RelatedI am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies View RelatedI am listing my Conflicts/Sharing, I am having a problem with my IRQ's has you can see, namely 16 and 18 and it wont let me assign IRQs in the Device Manager, its an ACPI, and its set to auto everything (pretty much) - So I write to you for help, how can I fix this
View 2 Replies View RelatedI have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedMy computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies View Relatedi have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies View RelatedThe system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
View 9 Replies View RelatedOn reinstalling my Windows XP x86 and using Windows Update to get everything back uptodate to the present day. I am having serious problems getting my sound drivers to install. I have tried everything under the sun, also tried a few things which i found while roaming the internet (Mainly google searches for the problem).
View 6 Replies View RelatedI have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
View 10 Replies View Relatedi rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
I am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens.
View 9 Replies View RelatedHad problems with virus, couldnt update Virus or Malware Protection. I did full shred System Recovery from partition ( HP- A1130N -Windows Media Edition- Version 2002 Service Pack 2. Dowloaded AVG Virus and ran scan, all OK.Went to MS Dowload center and downloaded and installed 87updates to include IE8,started computer, all OK. Then updater said needed to download SVC Pack 3- took a loooooooooooooong time. THEN COMPUTER WOULDNT START- tried the two options it gave me but no go back to same black screen with boot options-- regualar- last working point- safe mode etc. no go.
At this point I did a full System Recovery again and downloaded virus protection again.
I'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
View 5 Replies View RelatedWhen i startup my computer i get this message.."WIndows cannot start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEM"
I have a laptop, a Dell latitude d610 that says:Windows could not start because the following file is missing or corrupt: windowssystem32configsystem I attempted to try the fix listed here:http://support.microsoft.com/kb/307545 but when I went to copy using the command: copy c:windowssystem32configsystem c:window mpsystem.bak into the tmp directory I created it said: File could not be copied.
View 4 Replies View RelatedSo i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
View 1 Replies View RelatedWindows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is the error message i have. I have a copy of windows xp pro. i have no backup disk.
View 13 Replies View RelatedI have a Windows XP Pro box (named Shadow) with shares set for the root of each drive. I also have one external USB drive J:. I have used the Disk Manager, Add drive letters, to mount this drive as G:Shadow-J. I have set share for G:Shadow-J as Shadow-J. (I use this mount point approach to avoid the problem with the NET SHARE disappearing from J: when I turn off the drive.)From another machine, either one running XP Pro or a laptop running XP Home, I do NET USE for five different shares on Shadow. NET USE works fine for the shares for Shadow hard drives (C:, E:, F:, G but fails with error 1130 "Not enough server storage is available to proceess
View 1 Replies View Related