I want to add more memory ram to my lap top. I went to best buy a couple of days ago and the sales person told me that I had to add two 512 sticks of ram into my computer.It is a gateway laptop that I bought in 2003.
View 6 Replies
I have a Ecs P4vxasd Motherboard, Pga socket 423. The mainboard accomodates 2 DDR 184 pin 2.5v + 2 SDR 168 pin 3.3v Dimm sockets with a total capacity of
etting various blue screen errors, to go along with several reloads. I downloaded a memory diagnostic program from this site. My computer didn't pass the test, so I removed on stick and it passed this time. I assumed that the memory stick was my problem, and ordered a DDR 512 mb pc3200 stick from Curcial.com. I installed the new memory and got the same error from the diag. test. I began swapping memory around. all three sticks worked fine by themselves in either slot, but put two together & I would get a bad diag.
My computer say "limited or no connectivity" when I startup my desktop PC. I have reset the cable modem. I have called my cable company and they tried to do a remote reboot of the cable modem. I have uninstalled software I recently installed in case of a conflict with applications. My cable company also walked me through doing ntsh, I think it is, in the run box to try to reset my connection. I have disabled and re-enabled my local area connection. I have run chkdsk and it "found one or more errors on the volume", which it repaired. All this and I still have no internet connection. I'm entering this from a remote terminal so I'll download HijackThis to my memory stick to run a scan. I'm also going to do the Network Diagnostics. If you have any suggestions in the meantime, feel free to suggest.
View 13 Replies View Relatedon a lap top, where can I tell someone to look and verify how many memory sticks they have ( 1 or 2) without getting inside pc
View 3 Replies View Relateddear guys my sound sticks for a few seconds when playing music, and watching videos, it sticks for a few secs every few mins. i have downloaded the latest drivers and updates for both sound card and graphic card, its making me crazy,
View 11 Replies View RelatedI got a message about my DIMM configuration being arranged in a way that was not optimal, that it needed to be installed in a parallel way to work the best.
I called the guy who gave it to me and he came to look at it, he removed one of the 3 sticks of RAM, and left. And that fixed NOTHING. So I booted the computer from Last Known Good, I uninstalled SP3, then reinstalled it. And that seemed to fix it. Except now, the computer shows that I'm running SP2, NOT 3, and I can no longer open Internet Explorer. It won't open at all.
I have just purchased an off-lease computer from an online warehouse company. The computer is a Dell Inspiron 530, with integrated graphics and 2gb DDR2 Samsung RAM. Once my computer has been running for about half an hour or so, it will lock up for about 7 seconds, then unlock for a bit, repeating this process. A reset will fix this problem temporarily. In between lockups, I managed to get into the task manager and under the "Performance" tab, every time it locked up, the usage of my first core would skyrocket to 100%, the second core showed no jump in usage. I could not pinpoint the process which is causing this because each time a lockup would occur, under the "Processes" tab, it would read no spikes in CPU usage.
I have removed one of the sticks of RAM to see if it was the culprit. If the lockup occurs again, I will try to replace the stick
I currently have 2Gb (2x 1Gb sticks) DDR2 800 RAM in my system and saw an offer for the same RAM for 1/3 off the price I'd paid before so I decided to grab it while it was there. However, when I install the extra 2x 1Gb sticks the system won't boot fully and I don't know why. When I took them out and left the original 2x 1Gb sticks in the system works normally. I'm going to switch the sticks around to see if it's faulty RAM or bad RAM slots but it works fine in the BIOS and booting up. As soon as I enter Windows and login it the keyboard LED goes off, the mouse LED stays on and the system freezes. than switching the RAM out to test the slots on the motherboard?
View 9 Replies View RelatedI went to play a game and then when i got in it was all red (not totally just a tint of red was over my screen) so i ctrl + alt + deled out and now its stuck like this......i donno how to get it back to normal
View 1 Replies View RelatedRunning System :~ WinXP SP3 My 1st ( <- Can't count ) post so I d/loaded ESET security suite on 60 day trial without any problems whatsoever. When it came to remove it 48hrs ago I discovered I couldn't re-start my Win F/Wall due to missing ICS (module?), I gave up on that for a while and tried a couple of 3rd party options but got fed up spending more time answering pop up questions (3 in 1 s/ware d/load) so I decided to do a disc recovery.
View 2 Replies View RelatedI am trying to upgrade the RAM memory on my Gateway MX3230 notebook. It presently has 256 MB and I would like to upgrade to 1 GB. I have checked the Gateway website and and upgrade to 1 GB is acceptable. I purchased a memory module from Kingston which was listed as being compatible with my laptop. When I tried installing the module, the computer will not start, nothing but black screen. It's as thought there is no memory at all. I tried re-installing the module making sure it was inserted in as far as it will go, still no luck. There is no settings in bios that I can see that would prevent the acceptance of this module
View 3 Replies View RelatedThe IEXPLORE.EXE still reside im my PC memory after I close the IE window.
With task mamanger, I can see there are many IEXPLORE.EXE running. But, I already close all of them.
I ran 3 ad-ware, spybot, MS antispyware. Removed all the spyware by those 3 spyware detector.
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk.
I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system.
After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
why my Windowx XP sees only 1024 MB memory while I've increased the original memory of 512 MB by 2x 512 MB ?My motherboard has three DDR-slots. It had from the beginning a Kingston K 512MB PC2700 module in slot #1. This week I've added two Kingston K512 UDIMM 512MB PC2700 modules in the slots #2 and #3.All three modules has the type name KVR333X64C25/512, so I thought they would be compatible.
View 5 Replies View RelatedI am running Windows XP in a Compaq Presario, with CD reader and CD/DVD burner. My question: How do I get a DVD(with photos and sound) onto a Flash Memory stick or an SD card??
View 3 Replies View RelatedI have a white box Pentium 4 CPU with XP professional service pack 2 build 2600 installed. The motherboard is an intel D865GLC with 512 MB RAM installed in Dual channel mode with 1 256 MB stick of ram in slot zero of bank 1 and 1 256 MB stick of ram in slot zero of bank 2. This memory is dual channel compatible. I tried to add another 2 sticks of the same type ram but from a different manufacturer.
Here's the problem: I can use any 2 of the 4 sticks of ram together, both from the same manufacturer or 1 from 1 manufacturer and 1 from the other for a total of 512 MB. Everything works fine. I can place one stick in slot 0 of bank 1 and the other in slot 0 of bank 2 or I can place 1 in slot 1 bank 1 and 1 in slot 1 of bank 2 with no problems. I can even place a 3rd stick of the same type ram in any open slot and all's fine (except the machine complains that this is not an optimal memory setup). Memtest86 reports no errors with any of the above configurations
I was running Outlook, AIM, and IE at the same. After a few moment, I'd get this following message:
Your system is low on virtual memory. Windows is increasing the size of your Virtual Memory Paging file. During this process, memory requests for some applications may be denied.
When I hit OK, all my applications would close, except my Outlook. I'm running Win2K with 512 memory. My computer is only 1.5 years old. I didn't play any games or download anything so it's not heavily used. But why the message then?
I don't really have a problem on my hands, but I would like to ask a few questions relating to Virtual Memory and Memory Leak.
I downloaded a game back in December, but hasn't been installed as yet. I heard that it is created using "C++" or "C" (whatever it is), and I learned that it has a memory leak. My Virtual Memory was running low (it may already have beforehand) by the time the game was installed. My computer crashed two days later as a result.
But some users haven't experienced any problems with the game. My question is, is it a better idea for me to install the game on a CD-ROM or USB Drive and play it from that media type (instead of from the hard drive) so that I can protect my PC from crashing due to low virtual memory?
virtual memory and memory usage i need to know how to know this 2 perfomances and if we need to otuch something to upgrade memory and best usage for your pc.
View 5 Replies View Relatedanuyone ever seen this problem or know how to what is the cause of it or where it came from, and how do we fix it?
View 1 Replies View RelatedI keep getting the error message that my Windows virtual memory minimum is too low. I have Microsoft Windows 2000 and the following settings: total paging file size 205 MB; minimum 2 MB; Recommended 190 MB; Currently allocated 205 MB; current registry size 21 I'm not the system administrator so I can't change these numbers. I also couldn't find the pagefile.sys that someone suggested looking for. My IT guys don't know what's wrong; they reformatted my computer but I got this error message again. What should I tell them to do?
View 1 Replies View RelatedI have 3 memory slots on my motherboard. Two of them have 512MB DDR PC2700 chips. Can I put a 1GB chip in the third slot or would it have to be another 512MB chip?
View 4 Replies View RelatedI am having major trouble with windows explorer. Microsoft doesn't even have the error on their website, at least that i can find. The error reads: "The instruction at '0xfe9ed428' referenced memory at '0xfe9ed428'. The memory could not be 'read'."
View 3 Replies View RelatedI was just playing a game I bought recently, and after I got up to the second level, the models in the game weren't rendering properly, (some of the people were invisable etc), then it froze and gave me the following errors:
First error ~
Quote: Rendering thread exeption:
General protection fault!
History: Adress =0x98aeb8 (filename not found)
Adress =0x2 (filename not found) Second error ~
Quote: The instruction '0x009d8bd2' referenced memory at 0x0000001 the memory could not be "read" After these errors occurred, my desktop reverted to 6-bit color, and the lowest possible resolution, then wouldn't let me change it back.
My OS is Windowns XP. Lately while on-line, I have been getting a "virtual memory is low" error message and then my computer either locks up or I am booted off AOL. Can you tell me what might cause this type error? I have noted added any new software in weeks. The last install was my IPOD Nano.
View 2 Replies View RelatedThere are 4 gigs of ram in this system. On boot, the BIOS shows 4gigs, but Windows only shows 3 gigs.It originally had WindowsXP 64 bit installed and Win64 showed all 4 gigs. The problem was some programs required didn't run on Win64.Moving the ram around from slot to slot doesn't help.Up to 3 gig it shows corectly but upon placing the 4th Dimm I still get 3 gigs reported in WIndows.I can re-install Windows easily since no data is on the machine yet.Memory settings are all at safe settings, not pushing any envelope here. With 4 Dimms it runs at DDR333.
View 8 Replies View RelatedI am experiencing low memory when I try to use a graphics program to re-size a large image (3000pixels x 2300pixels). I just installed a new 70GB harddrive on my computer and before that, the graphics program could handle this operation without any difficulty. I also just re-installed XP and downloaded all the new updates.I have 2 harddrives:1 is 74 GB, 16GB is in use 1 is 76GB, 4GB in useOp. System: Windows XP, w/ latest updates Processor: 2.09 GHz AMD 1.5GB of Ram.
View 8 Replies View RelatedI am running WinXP sp1 with 384 ram. I have a cable high speed connection, and also use AOL byoa (bring your own access). I've tried to do things to get more memory. I haven't had any error messages, but I only have 38% free space. My question is: How can I find out what is using all my memory. Can I do something to the virtual memory to increase my physical memory?
View 6 Replies View Relatedmy laptop is nearly out of disc space can someone tell me how i can upgrade it the specs are windows xp home edition hi grade
View 12 Replies View RelatedMy computer is 2 years old and after adding many games for the grandkids my computer has started slowing down. I now have 512MB of memory would it speed up my computer to add memory? If so how much should I add and how do I do this? Is there a site that shows step by step instructions?
Any help would be greatly appreciated.
Cybernana
Hi, What causes virtual memory to get low on PC's
View 12 Replies View Related
