Downgrade 64bit Widows Standard 32 Without Formatting Drive
Jul 5, 2006
I just finished rebuilding my PC and Installed Windows Xp 64 edition since I already had it sitting on my desk. Figured I might as well to compliment the new 64bit CPU. Anyways, everything is running great except for a few 3rd party programs I like to used with a few games. I want to install regular XP Pro but have my HD as one single 80gig partition. My question is, Is it possible to have 2 selectable bootable OS's on the same partition? If so, how and if not, Is there a way to downgrade from 64bit of windows to standard 32 without formating the drive? Worst comes to worst, I could reformat and reinstall everything all over again but I would rather avoid that if possible.
View 1 Replies
ADVERTISEMENT
Oct 26, 2008
I have an nLited XP 64bit CD. I don't have any other CDs to copy over to, but I have a 4GB USB flash drive. I am having a hard time finding stores that either sell floppy drives or external floppy drives. But I need one in order to install my RAID drivers so that my SATA drive can be detected for installing XP on. I have the following setup (Stuff you need to know):Asus Vintage AH-1 barebones motherboard (AMD Socket 939)SATA 80GB harddrive (on RAID using the ULi utility)IDE 80GB harddrive, set to cable select, because this is technically my backup slave driver (too slow to run software from) (Yes, this system is outdated, but I need to make due with what I have until I can build myself the system I want) I need to be able to install my RAID drivers so that I can have my SATA drive detected. I have ideas, but I'm not one to be able to do things about them.
View 3 Replies
View Related
Dec 28, 2006
On my pc, I had one drive with Windows 98 on it, and one drive with Windows XP on it
Windows 98 was on drive C: XP was on D: They were set up so I could choose which one to boot to at start up I wanted to get rid of the 98 entirely, so I edited the boot ini, just removing the entry for windows 98 after restarting the computer, everything was fine....going directly to XP so I wanted to format the 98 drive so I could use it as additional storage, which I did using norton partition magic, I then shut down my computer......turned it back on.....and I get an error saying: NTLDR is missing.
View 14 Replies
View Related
May 20, 2005
Have a HP a340n,80 GIGS. new computer. it crashed, froze, and I did a reformat, then installed Windows XP Home Edition again, well, I plugged a set of headphones into the front of my computer, and after doing so, i lost all my sounds. it thinks that it is still there, but there is no sound. I tried installing and updating the drivers again, Realtek AC97, and still no sound drivers., when I looked into the system info, it shows yellow highlights on all the kernel applications listed. how do I get my sound working again?
View 5 Replies
View Related
Feb 9, 2008
so every time I log in to windows xp pro the system starts to load the user settings background and startup programs then I get a message that the system can't load one of the startup programs because the system is shutting down. then the system completely shuts off.After an exhaustive search online I found the recovery/copy userinit.exe wsaupdater.exe fix and tried that but I still get the auto logoff. I've tried repairing the installation using the OEM CD, but that only works for the first login. after that, same issue. I've run antivirus and spyware apps to check the system, but found nothing (I did this inbetween repairs). After 6 times of going through this I'm ready to reinstall from scratch. It just annoys me that windows can break so easily. Did I meniton I hate windows? Anything you could suggest, would be appreciated. I wait to here from someone in the forum before tackling such a HUGE project as to reinstall Windows and all my programs and data.
View 7 Replies
View Related
Aug 27, 2005
I have a portable flash disk usb storage device and a flash mp3 player (usb)
that will not show up in windows explorer as Removable Disks. Both devices
show up in device manager as working correctly. I am running windows XP.
View 1 Replies
View Related
Jan 17, 2006
I want to format my hard drive ( been two years ) ! It is now running XP Pro, which I do not have the discs, and I want to switch back to XP Home, which I have one disc that came with the computer !I've tried booting up with the disk, so that I can format my hard drive, but nothing happens!
View 2 Replies
View Related
May 25, 2010
My hp dvd 1140i will not burn my movies it keeps saying that the disc needs formatting.
View 1 Replies
View Related
Feb 16, 2008
How can I unformat a flash drive? I formatted it to make it bootable to try to run feather linux which didn't work. Anyway, I am trying to get it back to where it was before. I tried HP's usb format utility, but it doesn't see it as it won't even show up in my computer. it does show up as a storage device to unplug but that is all.
View 11 Replies
View Related
Sep 10, 2005
I need to know if I can take a drive out of my friend's tower, and put it in my tower as a slave drive to format it, will it be a bootable drive back in my friend's tower? Or will it still read as a slave drive with no OS files? I have to do this because my friend lost his Win XP Pro SP1 disk, and all I have is a Win XP Pro disk with no SP on it, I have a separate downloaded SP1 file, but if I try to use that, it will chop their harddrive from 200 gigs down to 130'ish, like it did with my 160 gig drive Or maybe I could create a new Windows install CD with SP1 on it already.
View 2 Replies
View Related
Jan 31, 2008
a few days ago i had a problem performing a clean install of Windows XP which is on another thread Link below:
URL...I now have managed to install XP on my 60GB drive but when i try to format my 400gb SATA drive i cannot. BIOS Sees my SATA drive and windows XP sees the drive as Unallocated. I tried formatting it in windows and Partition Magic 8 and both times windows seems to crash and hangs and there is nothing i can do but reboot to get back into windows.
View 14 Replies
View Related
Dec 29, 2005
How does one go about formatting the hard drive?
View 9 Replies
View Related
Dec 30, 2007
I friend of mine is working on my pc for me. I'm putting in a new main HD (since mine crapped out) it's 80G. I also have a new 320G backup HD that he's putting in. Well he's got everything going and XP pro loaded up but says that he normally formats a drive with a program off a floppy. My PC doesn't have a floppy drive nor does the MB support one. He said he used XP to format the drive (which he's never used XP to format a drive) and the BIOS is saying 320G is there but windows is saying only 8G is there. Any idea what's wrong?
View 14 Replies
View Related
Jan 17, 2008
i had to purchase a new hard drive due to multiple errors on my hard drive. My brand new drive is the same exact model as my old one but when i try to install xp on the new drive i get as far as formatting the drive and the computer shuts off and wont turn back on. I have to unplug it, let it sit for a little but and then plug it back in and it will start up again.
View 14 Replies
View Related
Feb 24, 2008
we have an XP box at work we use for testing custom apps we create...we threw in an extra drive and put Vista on this drive just to test out our apps...after testing, we removed the drive (and hence Vista) leaving just the main drive with XP...our boot options still list Vista as a boot option..i know fixmbr works with XP, but there is another command (can't remember what it is, never used it) for Vista...using XP, can i use the fixmbr command to remove the Vista boot option? if not, how should i remove the second boot option from XP?
View 7 Replies
View Related
Oct 11, 2006
I may have to reformat my entire hard drive and reinstall a totally new, legal copy of either Windows XP Home SP2 or Pro SP2. Do NOT ask me how I know this! IF I want to format c:, what's the right process and sequence for doing this, and then reinstalling Windows from a CD?
View 2 Replies
View Related
Sep 20, 2008
I'm formatting my hard drive and re-installing XP, and I'm wondering if I can delete the system partition without any adverse effects to the system. When I try to delete it from the XP Setup disk, it warns me not to do it, but I'm trying to create a larger partition for the system. Can I delete the system partition and create a new one.
View 3 Replies
View Related
Feb 19, 2008
I got a new system assembled a month back and after 15 days the stop error began to happen (this was after my bro tried to transfer files from his iPod & it didn't happen). I looked up a lot of forums but didn't find this one and couldn't figure out what the problem might be. Restored system, disabled services, but nothing worked. Finally I got the C: drive formatted and Win XP SP2 reinstalled. Didn't install unnecessary/extra software this time. But I found this site a day before getting it formatted, so saved the last 5 minidump files. And the day after the reinstallation, it has started happening again. The first time it was the bcmndis.sys file -- Airtel Beetel 220bx modem -- connected with the USB; couldn't find another driver for it online.
View 7 Replies
View Related
May 10, 2005
I have 3 hard drives, one 40 gig, one 20 gig and a 160 gig, i have xp professional on the 40 gig and i use the 160 gig for all my game.What i want to do is put windows millennium on the 20 gig hard drive, is it possible without formatting my other drive and create a dual booting system.
View 4 Replies
View Related
Feb 24, 2007
Hope this all makes sense... To cut a long story short, i have ended up with 2 versions of XP on the same partition of my hard drive. I know this is always a bad idea but it wasn't me who did it! The person who installed both also partitoned my hard drive into two sections, 40gb and 20gb....so i now have XP pro and XP Home installed on the same partition. Anyway i used partition magic to merge the 2 sections together as it was confusing issues.
Basically- What i want to do is start fresh with one working version of Windows XP Pro on my computer. I've tried inserting the XP Pro CD and telling it to install a fresh copy, overwriting all other versions of windows- but it has only overwritten XP Home and i'm left with 2 versions of XP Pro, and my computer asks me which one i want to start on start-up. So how should i go about removing one of the versions? Would formatting my C-Drive do the trick, followed by installing XP Pro from the CD again?
View 8 Replies
View Related
Nov 6, 2006
I recently had a few problems on my laptop, so I reinstalled windows without formatting the drive. Now I guess the windows cd I used had already been installed on my other computer leaving me unable to log on to my laptop because windows thinks my product key is "invalid" and won't activate. So is there any way I could undo this installation of XP leaving the old working one?
View 13 Replies
View Related
Jan 5, 2007
This is my DAD's personal computer now, we are trying to format his hard drive i get to the point where it asks me whether i want to proceed, i put yes and hit enter, it then doesn't start formatting, it just say C:WINDOWS?
View 5 Replies
View Related
Dec 27, 2005
After formatting my drive recently (XP Laptop) some of the keys do not produce the character indicated.
For example:
shift 2 should be " but is now @ '
i have lost the symbols for the pound and euro currency completely and a few otheres are changed also
View 5 Replies
View Related
Feb 5, 2007
I will be formatting my drive now and I want to install XP and Vista so that I can choose which one to load at the start of booting up. How would I do this? Do I need to create two partitions, install both operating systems on the separate drives and then done? Or is there more to it? Which operating system should I install first, if there is any difference
View 1 Replies
View Related
Apr 1, 2005
Fitted an extra HDD to my machine. Detected in bios but XP will not find it. Drive is unformatted (new), how do you format in windows XP. It was easy in 98SE, just go to dos, fdisk then format. How do you do this in XP?
View 6 Replies
View Related
Feb 4, 2003
This is the problem I'm faced with and don't know what to do from here. After deleting current partition and then formatting in NTSF file system, it goes through the process of preparing for installation. When it reboots, it says the following:"couldn't open drive multi(0) disk(0) rdisk(0) partition(1)NTLDR: couldn't open drive multi(0) disk(0) rdisk(0) partition(1)"If I take the XP CD out it just has blank screen with blinking cursor in the top left corner.
View 11 Replies
View Related
Jan 13, 2007
I know theres heaps of partition and format tools out there to help you do certain things, but what i was wondering is instead of formatting the old fashioned way, and losing everything, is there a way i can format and not lose anything, so i dont have to do a million re installs? my hard drive is partitioned NTFS. and i have my C: where all my windows files are stored seperate to all my other drives.
View 3 Replies
View Related
Dec 24, 2008
I attached a hard drive as a slave to my computer and I went to command prompt and formatted the drive using format d:.When I put the hard drive back into another computer as the master drive, I get an error message saying "NTLDR is missing" in command prompt. I tried to search on google, but I can only find solutions for systems that already have Windows installed on it.I changed the boot device priority in the BIOS, but I still couldn't get the Windows XP to boot.
View 10 Replies
View Related
Apr 8, 2008
I have been trying to format my hard drives. I tried using Device Manager, it let me format my E drive, but not the C drive, and then I tried by booting with the XP CD. Somehow I managed to install Windows on my E drive, and my C drive is still as it was. I have been following the instructions on how to format and install to the letter, but it's not happening for me. All of the screens match what the instructions say, but the result is nothing.I have searched this forum for HD/XP advice, and have done as suggested, no luck.How do I format my C drive, and start again?
View 8 Replies
View Related
Jan 8, 2009
MY Operating System is XP Pro with C to G hard disk partitions.I formatted G drive for install second Operating System.C drive file system is NTFS.Other drives FAT32.Can I install second Operating System without formatting C drive.
View 6 Replies
View Related
Aug 9, 2005
With W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
View 6 Replies
View Related
