I have windows home edition with service 2(sp2), i want to upgrade to xp professional , when i install xp professional when the pc restarts and the windows xp logo comes up , a messages pop up saying "press any key to boot from cd" then it disappears and the windows logo comes up again, then it says again "press any key to boot from cd" why does it keeps on doing that, i leave it for like 6 hours and it keeps on doing that,(the xp professional cd i have is a genuine xp professional Cd.(the pc is a desk top"Compaq presario 3500 series")
I'm attempting to update from Windows 2000 Professional to Windows XP Professional.When I insert the XP CD and click on "check system compatibility" I receive the following message "Windows XP setup does not support upgrading from Microsoft Windows 2000 Professional to Microsoft Windows XP Professional. Setup cannot continue."
I just built my first computer and I don't have an OS yet. I do have 2 copies on Win XP Home Edition that I found that I may or may not have installed yet.I was going to buy the Win 7 Professional Upgrade online from digital river. It comes with a download for your computer and a disk kit for 13 dollars more that they ship to you. Thing is, this will be a CLEAN INSTALL on a brand new terabyte hard drive. I have read about people doing clean installs with the DISK of Win 7 Upgrade Media, but it seems too complicated. I also know that the best way to upgrade Win XP to Win 7 was to do a clean install and backup your files. But im not going to have anything stored on Win XP.I want to install Win XP Home Edition,connect to the internet, download the Win 7 upgrade media. And install that.
I have heard when attempting to upgrade not clean install a new os. For example the whole win98 to w2k doesnt fly good because of the fat32 to ntfs deal. so what about upgrading w2k pro with ntfs to xp pro with ntfs? is this a good thing to do now a days or is it still better to just perform a clean install over my existing os. I really would like to keep my stuff intact, but I dont want a xp upgrade. So what type of issues have you guys had upgrading w2k to xp pro?
I have XP professional from my last computer (it's now inoperable) and XP home on my new PC. I'm not sure what to do or how difficult it is to upgrade my new computer to XP Professional with that same software.Just load and go? I know I do need to set a restore point, since there's not one yet.
Have XP Home installed on my present system and bought a full version of XP Professional . Can this be full version be installed over or should I say will this upgrade my XP Home without deleting any of my present programs and documents?
I've been using Windows XP Professional for several years and am quite happy with it. My roommate has a desktop that she bought some years ago and it came with Windows XP Starter Edition installed. Lately I've been trying to help her upgrade from her XP SE to XP Pro but before doing this I have some questions.Is Windows XP SE at all upgradable to XP Pro? The reason I ask this is because:1.1 I accessed "How to install or upgrade to Windows XP" on http://support.microsoft.com/kb/316941, but it does not mention Windows XP Starter Edition as one of the options of OS to be upgraded (only mentions Win98, Windows ME and Windows 2000 Pro 1.2 I also accessed http://www.comztek.com/Admin/ProdMan...1.asp?name=228 and it says "You may not upgrade to Windows XP Professional from Windows XP Starter Edition,. as this goes against Microsoft's End User License Agreement (EULA) 2. In case Windows XP SE can in fact be upgraded to XP Pro, I have 2 questions:2.1 To start the installation should I simply boot the desktop normally and then insert the Win XP CD on the CD-ROM unit and choose the option "upgrade"?2.2 Will files in the desktop and installed programs be preserved? Or will my roommate need to install all the program she uses again? What about local files of Outlook Express and the MSN Messenger emoticons? Will these be lost?
I currently have XP Home, 5.1 build 2600 according to dxdiag. I also have an XP Profesional CD, however the compatibility test on that CD says "Setup cannot continue because the version of Windows on your computer is newer than the version on the CD". So it seems I can't upgrade with the disc I have.I want XP Pro because I have 8GB of RAM, and I don't like Vista. Also I want to upgrade rather than fresh install so I can keep all the programs etc. I currently have. What are my options on upgrading to a 64 bit version of XP Pro? What do I need to buy?
I am trying to install XP on my 2000 but it says: Windows XP Setup does not support upgrading from Microsoft Windows 2000 Professional to Microsoft Windows XP Professional.Setup cannot continue.Do i have to reformat my HD? Do i have to reinstall everything on my HD some stuff i dont have the cd any more.Like Office 2003.
I have a machine with an 120 day Evaluation version of XP Pro. I am now getting the - You have 30 days to Upgrade this Evaluation version warning message.The System is fully tuned and honed to perfection, so what I would like to know, now that I do have a full version is - how can I do this without re-installing everything?Can I change the ProductKey number? Is there a way to overlay the Full version? Can I change a file or files which will allow me to keep the installation I have now?If I use a couple 'a diskettes can I at least transfer the current settings to another installation?
I really don't understand much about dot-net; but, I am up against a real problem running a certain program that is currently using dot-net 1.1. I won't mention the program by name as I don't want to side-track the thread into troubleshooting a particular Windows App.
Tech support said that an error message we were getting indicated a dot-net problem. He suggested his program should run on dot-net 1.1, 2.2 or 3.5. He further suggested to try uninstalling and reinstalling 1.1, which I did to no avail. Problem is when I try to install 2.2 or 3.5, I get an error message saying there is no qualifying product on my system for the "upgrade".
So, how do I get 2.2 or 3.5 to install. I've read a dozen ambiguous and unclear web pages and tried downloading and installing four of what I thought was the dot-net installer.
Windows XP SP3 and all available updates. This is a freshly formatted and installed system that has not been on the 'net except for updates running on an older Dell socket 478 with Celeron 2.8-GHz processor and 512 RAM.
I have a windows 2k3 server with 4 win 2k pro workstations...the I.T. goon prior to me getting involved bogied the 4 workstations and all are using the same license #.if I purchase 4 new oem XP Pro upgrades with 4 new license #'s will I be able to upgrade?
Are there any important things I should know before getting my new Windows XP computer, especially security- or virus-wise? It seems that every new virus is made for XP, and that XP gets the lion's share of the security holes, so I'm a little daunted by moving up from my old Windows 98 computer, but otherwise excited about getting a great new computer for a good deal.
I am , finally, getting close to upgrading my HD from Win98 to XP. What steps do I need to do to prepare my HD for this. Do I need to backup all programs on CD's. Will some programs and settings " carry-over ' to XP ? Should I get the XP home version with servicepack 2 ? Will I need my old Win98 installation CD ?
I'm finally getting around to upgrading from Win98Se to XP pro. I've run into a snag. Here is the blue screen error message I've found:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen restart your computer. If this screen appears again follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and **** (I wrote this down by hand and this word is unintelligible) Run Chkdsk /f to check for drive corruption and restart the computer.There is some tech information as well:
I've check for viruses with Panda online and there are none. I have three hard drives, two are internal and have never given me a problem and third is an internal adapted to USB. It is completely disconnected now. I have run scandisk and no errors. Drive F is a CDRW and no problems.
C is 20GB, D is 40GB, E is DVDRW and F is CDRW. Drive G,H (usb internal) is total 160GB.
I built a new desktop last year with a 64 Bit processor but did not want to drop the $ on a new OS at the time. I continue to use the 32 Bit Version of XP. I have 4 GB of RAM but can only use about 3 of it due to the video card RAM and XP's 4 GB limit. I do not want to go to Win 7, I'd like to upgrade to the 64-Bit version of XP. Are there compatibility issues with going to Win XP 64 Bit for older drivers, programs, etc?
I have a laptop with Win 7 Home and have had some trouble getting older programs and devices to run on it - hence the reason to avoid it on the desktop.
I'm going to upgrade from 2000 to XP w/SP3 and was wondering about "backing up files". I don't really have much, but I'm mostly concerned about program files (I can't remember which ones I've installed myself)... I'm also considering "unpartitioning" and starting over because I bought the pc "used" and it has partitions all over the place.
I need to upgrade over 200 PC from 2000 to XP. Some are desktops and some are laptops. I need to do it with very little input from the users. I was thinking of using a email sent out that would ask them to do it at lunch or other sometime. I figure that it will take at least an hour to do the install etc, with no error. I plan on a test group to start with before I roll it out company wide.
Im a pc tech for a bank, I have to upgrade a pc from windows 2000 to xp, I know how to do but my question is will all the digital certificates and programs upgrade with it?
PC specs are listed in profile. As you can tell, I have much less than the state of the art computer. I am looking to upgrade to a new MB for less than $100, $50 if possible (I can buy used from eBay, Amazon, whatever). Also I have no clue how to replace a MB, and if it is possible, I don't want to lose my data. I have a legit copy of XP Pro, but I don't have the disk, because I got the computer used. Eventually I want to dual boot with Linux, but I can figure that out later.
I need help upgrading my system. I know nothing about computers so I really need to know what I am doing. I know that I am running Windows 95 with 1 GB of hard drive space, a 200 MHz processor, and 32 mb of memory. When I first got this computer about 12 years ago it cost me 2,000 dollars. Am I going to have to pay that much for a new system (if I need it)? Plus is there any way I can get this Windows Vista I've heard so much about?
I got a new mobo, and I didn't think about my Dell oem XP not working because of it. I really think its stupid to buy software I already use and own. Is it possible to use just an upgrade xp version to make my oem full? Ive also heard that you can contact MS and request they replace your oem restore CD with the actual install CD, and that they will actually do it. Anyone have any thoughts or experience about this? Ive been combing forums and Dell support and MS support for hours but I can't seem to find any more info about this. I really hope it doesn't end up I have to pay over $100 just to buy software Ive been using for the past 4 or 5 years....
so I am thinking about upgrading, but with some confusion, and some concern. I have been reading on Wiki about Windows Genuine Advantage (WGA), and it sounds not only am I going to be pestered for the product key eveytime I make a hardware update to my PC, but Microsoft will take it upon themselves to download spyware when I go online.Could somebody explain to me more simply than the author of the Wikpedia article what happens. (I don't understand what he means by "notifications" nor exactly what is being updated/read of my machine on an 'update').Am I right to think that I will only ever be asked of my product key to reactivate? I am only ever stuck with the one product key, right?
If so, why check against hardware? As I understand from what I have read elsewhere, system hardware is read at installation, recorded in a file, and then if checked positively against for changes, causes a re-activation prompt. But what's criminal in upgrading? If the product key remains constant to one supplied with the product (likewise for pirates), then in what way is it catching anybody out? Finally, if each copy of XP is generic and not carrying a unique product key, does this mean each batch comes with numerous codes? If ever I were to lose it, Microsoft would supply me with one of a ker-zillion (an expression of my ignorance) pre-determined codes?
I'm considering installing XP Pro over my XP Home installation (SP 2).Is there anything I should be worried about? For example, breaking installed software?
I have bought a new computer which came with Vista. My daughter's computer has Windows Me as its operating system. Can I replace her Windows Me O/S with my now surplus XP (OEM) and if so, how do I do it?
