Ive recently had this problem with this vundo strain of trojans and tis located in my system volume information folder.. So i did a little researching and figured out that no virus remover will be able to remove it since windows wouldn't allow me to delete or remove it in the first place.Thus the alternate method being the turning off of the system restore function and thereby deleting all system restore points. Although i came across a roadblock in that even though i am the administrator on my computer i am unable to check or uncheck the turn of system restore option in the system restore tab in the properties of My Computer.
Ever since I installed SP2 I am not able to turn off System Restore - i.e. the option to change the settings is there but when clicked nothing happens.
I had a problem with my computer running slowly but I solved it.I was told to turn off restore points,then turn them back on.Tried that but I get the following message.System restore encountered an error trying to enable/disable one or more drives.Please restart your machine and try again.
i'm running win xp pro...i got a couple of viruses and need to turn off system restore! i went to try to turn it off and it wont give me the option of doing so!something about group policy? I never turned that on ! how do you turn off system restore like this?
When I tried the procedure Start/Run/gpedit.msc. Computer Configuration, Administrative Templates, I die not find the ( System, System Restore ) Group policy, In order to change and activate system restore option on th system restore Tap
every time I start my computer, system restore boots up. That is, the system restore page appears and thus I have to close it before I can do anything on my computer. So, my question is.. how can I get it to stop booting up as soon as I turn on my computer?
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
Anybody ever try this to repair System restore . You can reinstall System Restore with these steps: 1. Click Start, Run, In the Run box, type "C:winntinf" without the quotes and press enter.2. Look for SR.INF and RightClick on it, then LeftClick it, select "Install" Follow the prompts, Reboot and System Restore will be ready to use.Mine does not restore, not even in Safe Mode so was looking for a fix
My OS is Windows XP Proffessional Version 2002 (Service Pack 1), now recently I had to turn off System Restore to get rid of a pesky trojan horse virus (I did successfully). The problem now is I can't turn it back "on". I've gone to the troubleshooting pages and used every method and I get the same error messages
"Could not start System Restore Service on Local Computer" "Error 5: Access is Denied" "System Restore cannot protect your computer right now, restart and try again"
I am trying to do a system restore and my system runs it all but when all is done I get a message saying that no changes have been made to my system and that the system restore was unsuccessful. The reason I am trying to restore my system is because Photoshop is suddenly unable to save as a jpeg? It doesn't recognise the jpeg format when saving and saves as a Photoshop document. THen it wont recognise the file to open it. I have uninstalled and reinstalled the program to no avail. Funnily enough photoshop elements has no problem with it.
on recent boot up i was surprised to see a different but familiar desktop =. one that i used before. also the system was acting strangely and very sluggish. i suspected a problem with recent downloads and tried the system restore. there was only one available restore date even though the OS has been running for six months. i tried this restore point but got message "unable to restore to this date- no changes have been made " i can not find a way to increase the number of automatic restore points.. i then did an error check and defrag and system seems to be OK now but am puzzled with system restore function..
Win XP Home SP2..I am having problems with system restore. When I try to open system restore and restore my system to a previous time, i get this message: SYSTEM RESTORE IS NOT ABLE TO PROTECT YOUR COMPUTER. PLEASE RESTART YOUR COMPUTER AND THEN RUN SYSTEM RESTORE AGAIN.When I do just that, the same message comes up again and again.I next go to the control panel and open up the system properties window. Under the tab System Restore I try to check the box: TURN OF SYSTEM RESTORE FOR ALL DRIVES. I do this to try to clear out the cache or restore points and I get the following message:YOU HAVE CHOSEN TO TURN OF SYSTEM RESTORE. IF YOU CONTINUE ALL EXISTING RESTORE POINTS WILL BE DELETED, AND YOU WILL NOT BE ABLE TO TRACK AND UNDO CHANGES MADE TO YOUR COMPUTER.
Am running Windows XP (sp2) on HP Pavilion Home Edition Running Norton Internet Security-2007 edition Windows Defender Spy Bot Search and Destroy Seems I can't run System Restore Disc space usage for this is set to Max When I try to run Restore, I click on Bold Date next I click on Restore point-usually system check point after it goes through the bells and whistle it comes back Unable to Restore My question is, why doesn't it go back to where I want it to?
I need to restore my computer to an earlier date, but when i tried to find the system restore, it was not there. First i went to start, all programs, accessories, and system tools. When i saw that it was not there, i entered the run command for it. When i did that, i got the same message you would get if you enter an invalid command. After that didn't work, i entered "msconfig" in the run box, and then once the system configuration utility appeared, i went to the tools tab and highlighted System Restore, and clicked Launch. But then a window popped up saying the following: "The system cannot find the file specified". I am about 75-85% sure that the rstrui.exe file was deleted by one of the young ones fiddling around inside the system folders. What i do not know is how to get it back. I remember one time when the windows sound recorder executable file had gotten deleted, i just downloaded it from the internet, put it in the right spot and it was fixed. I can't seem to do that with the system restore executable file. Any ideas on how i can fix this?
I formatted my pc the other day cause i had so much rubbish on it that i thought it would be easier to do so. I normally play yahoo pool so i need java sun for it too work or microsoft virtual machine, I prefer using virtual machine cause it loads easier and doesnt seem to crash. i cant install virtual machine onto my pc cause it says i have the wrong operating system for that version. java sun 5.0 is installed on my pc but not properly and wont load so i went to unistall it and get this message "error transforms, verify that the specified transform path is valid" I'm not sure what to do, I was gonna do a system restore but i cannot even find that on my pc.
i cannot use disk defragmenter, when i click analyze or defragment it says "Disk Defragmenter could not start."i try to check the disk and it says "Windows was unable to complete disk check."last, i hope windows system restore could solve my problems, but after i select the restore point, i cannot click 'next', i clicked it and nothing happened.
I clicked on system restore and got the message " system restore is unable to protect your computer . Please restart and try again" I rebooted several times and got the same message .I then accessed system restore with view of switching it off and on again.i checked the on / off box then clicked on apply changes and got the following message"System restore encountered a problem trying to enable/disable one or more drives. Please restart your machine and try again later"I then thought that if i slide the disc space bar down to zero it may clear out system restore but i got the same message as when i tried turning it off .i went into safe mode and searched for the wininit.ini file with the view of renaming it but this isn't the problem.
i did a system restore on my husbands pc now i am getting the message:Explorer.Exe -Unable To Locate Component This application has failed to start because BROWSEREUI.dll was not found. Re-installing the application may fix this problem
Not sure what has happened here. Toshiba Laptop M70 WinXP home SP2.Initial issue Unabel to read files off the DVD/CD Matshita DVD-Ram UJ-8415 When checking "System" Hardware there is a yellow caution ! beside it indicating an issue.Action: Uninstalled device and rebooted to let windows find appropriate driver. System said found new device and identified it by name. But still the trouble indicator.Tried a couple of things to no avail.I have the toshiba - product recovery disk but I cannot access it due to the DVD error. so I attached my external DVD (usb) device Thinking I could load the disk in it and recover the drivers or what ever. My Freecom DVD now has a Trouble indicator on it as well. so it appears that the devices won't recognize.(tried to instal again - system recognizes it initially then show the trouble indicator again.
I've had my HP computer for quite some time (5 years at least), still runs great and all. But here recently my harddrive crashed when trying to do something (still using that harddrive), when I tried to use the system restore feature from HP,it wouldn't let me, so I had to get a WindowsXP disc from someone. Using their copy of windows won't let me update windows or anything, so I decided I would just system restore using HP's system restore. (Format and reinstall my windows), but when I hit the F10 at bootup, it does nothing
My prob is with a desktop It goes like this:1. Internet stopped working on system - noticed "search.iMesh" in address bar, with "IE cannot display the internet page" message displayed. Finally found and uninstalled iMesh stuff. 2. Now have Google back in address bar but unable to go online - even via Microsoft default. I've tried 5 diff. dates with System Restore but no luck. So used flash pen to put ComboFix on and it shows up with "This machine does not have the Microsoft Windows recovery console installed".
recently i did a system restore to fix some problems that came up after my siblings used my computer. before the system restore i could play avi files no problem, but afterwards the media player can only play the sound.ive tried several movie players such as divx, windows media player, klite movie player, and vlc. all of them can play the audio but not video.i updated my divx codec and downloaded a new fddshow codec but it didnt work. k-lite codec pack comes with a whole lot of video codecs to play any movie format, but it still doesnt work.
I've tried unsuccessfully to restore my windows xp to a prior date, following the tutorial, with the response: "your system was unable to be restored to the prior date."
Very recently I managed to open a .exe file which contained a rather nasty strain of something which has come back to bite me. When I start up Windows XP SP2, I get an error message telling me that "Generic Host Process for Win32 Services has encountered a problem and needs to close." In addition iexplore.exe starts up in the task manager on every startup, without the browser launching and my baseline RAM usage is 80MB or so higher than normal. Now I have blocked iexplore.exe with my firewall, I have scanned my computer with Norton internet security 2007, Spybot S&D, Adaware SE and I have deleted the .exe file from which the infection originated. Unfortunately, though some minor infections were discovered, the problem at hand remains unresolved. MSConfig does not show anything about iexplore.exe opening up on startup., or any other program I do not want for that matter. I am at my wits end, and I hope someone here can figure out what I cannot....
I run windows XP and, after several years with no audio problems, I suddenly lost audio.I checked my sound settings and everything was fine. I tried to do a 'system restore' but the system restore does not work. It will not allow me to click on a previous date; when I tried "help" in 'SR', that did not work either.I've rebooted several times to no avail. Earlier in the day I had downloaded a new program called 'seekmore'...thinking that may be the problem, I uninstalled it, but the audio is still gone. I ran a Norton Scan... still no success.
Where does Win Xp store the System Restore files? I'd like to save some disc space by not keeping every restore point. As it is, I have a couple of restore points that I created when I knew things where stable and that's really all I want.
have windows xp and system restore turn off box is not ticked but won't restore to previous time and also wont go back further than 2 days,can't scroll calender.
