When shutting down or restarting my computer I get the following message for about one twentieth of a second then a warning sound and finally the machine shuts down or reboots as normal.Can something be done to remove or settle this warning?
"The application failed to initialize because the window station is shutting
down."
I would appreciate any useful information. Making sly remarks is childish.I to have received the message: "USERINIT.exe Application failed to initialize" after removing software that was previously install and may have been causing the computer to not get a TCP/IP number. Now I can not get to the desktop, It hangs.
I agree sometimes reloading a cleaned of hard drive may be the only way to resolve a problem. However, first see if there are any quick fixes that may save some time.
If all you can say is start over again from scratch then you are wasting your time and everyone else's that reads for some answers.
The application failed to initialize properly(0xc0000142).Click on OK to terminate the application .
View 1 Replies View RelatedI have Windows XP. I update my Virus Subscription in January every year and this year Norton said they no longer support the one I was using. I updated to the latest version and it included Pop up blocking and a bunch of other stuff. When it ran the scan it came up with a bunch of things and I diligently followed all the instructions to take care of them. (I don't know if this has ANYTHING to do with my problem but from some of the other posts I thought it might.) To make a long story short, I tried to update to Windows Media Player 10 to interface an MP3 player my daughter wanted to use. When I did this I got the following message. 'The application failed to initialize properly (0xc0150004). Click on OK to terminate application.' After 2 days of trying to figure out what is causing this, I reverted back to the previous version I had and was grateful I got it back. Now, a few months later, I am working on something for my job and I go to install the software I need and the same message appears! So, I need some help. I am somewhat tech savvy but I haven't read code since learning Fortran in college 20 years ago!
View 9 Replies View Relatedwhen I start my computer. The first error message I get is Application error Inicio.exc failed to initialize properly (Ox000142). The second one is APVXDWIN.exe failed to start because pavall.dll was not found Re-installing the application may fix this proble. I am running Windows XP
View 1 Replies View RelatedSo I have been having this issue with a program crashing and displaying a error message. Also just a note, This problem is happening on a windows xp pro machine. When the icon to start the application is clicked the program automatically displays the error. So I never actually get into the application. The error message reads "application failed to initialize properly 0xc0000005" (0xc0000005 means an access violation memory error occurred)
Now this is odd because the program works on other computers(of all different types)amd64, amd64x2, Intel core2duo, Intel celeron D, and a regular Intel P4 board. All with various different rams and such, leading me to assume this is not a hardware problem. I have tried to use the built in program error debugger in windows "Dr. Watson" to get a error log. but for some reason the program does write to the file.
I'm getting a LOT of error messages and having to reboot all the time. Let me see if I can explain what is happening... if my explaination isn't clear.. please ask me the questions you may need to know to be able to answer me 'When oppening an application I get: Application failed to initialize properly.'Or "not enough quota is avialbe to process the command'I use PCcillen and have had tech support did an hour going through my computer and have stated that there are 'no irus's'.Outlook: Sometimes when I go into find a file I get this type of error: Application or DLL C:Program FilesCommon FilesSytemMAPI1033outex.dll is not a valid windows image. Please check this againt your installation diskette.
View 14 Replies View RelatedI'm using Windows XP on a home computer. My computer keeps crashing. It locks up and I have to pull the plug. If I'm in a forum, lines of type start disappearing. If I'm trying to open a program I get an error message like "application failed to initialize." Yesterday I got a Runtime error message: "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I ran Trend antivirus program and Webroot spysweeper, but no problems identified. I keep getting messages from Bigfix that a problem was encountered but by then I can't get Bigfix to open because it's locked up. I ran a dxdiag but it showed no problems either. The problem started when I ran the Uniblue registry sweeper which I thought was free. It identified some old stuff but charged a fee to fix it, so I deleted Uniblue. I went into regedit and removed Uniblue and while I was there I removed several old games from Gamehouse that had been uninstalled over the past year. I swear I didn't touch anything else in the registry! Please keep responses simple and specific as I don't know much about computers.
I just tried to open Incredimail and got the following message: IncMail.exe Application Error: The application failed to initialize properly (0xc0000044). Click on OK to terminate the application. Surprisingly, my computer didn't lock up yet and I was able to return here to edit my post, but a crash is coming....
I use Windows XP with SP3 installed and when I turn on my computer and it gets to the log in screen it doesn't show the regular long in for XP but the clasic one. Also when I get into my profile (or anyone else for that matter) it says the following. "Explorer.EXE - Application error. The Application failed to initialize properly (0xc000001d)." All the other sites I went to say to open up the task manenger but when I go to do that it says.
View 9 Replies View RelatedIm out of my depth here and after searching through Microsoft help topics and trying various things still no luck. After doing a repair with the XP disc I have ended with with more problems than before. I was going to make first priority SP1/2 as my system is now warning me. When I try I get this message. The procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll. Int Explorer 7 wont open: Same message as before. Tried to download updates (using Mozilla) but it requires IE 5 or above. WMPlayer wont open An internal error has occured , Office Word, Excell etc :The application failed to initialize properly (0xc0150002) Tried to unistall IE7 Control panel wont open
View 14 Replies View RelatedI uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
View 6 Replies View Related"The application failed to initialize properly (0x80000003). Click on OK to terminate the application." Since I installed Visual Studio 2005, I've been getting this error when trying to run Soulseek, which has been working fine before. After OK, the same message comes up again, and after OK again, it closes and Soulseek doesn't run.The same thing happens trying to run Media Player Classic, and the HijackThis installer.Some googling suggested that other people had similar problems with other programs that might be .NET Framework related. I tried reinstalling Framework 2.0, installing 3.0, without any luck. Finally, I uninstalled Visual Studio and everything I could identify as installed with it, but still nothing.
View 14 Replies View RelatedWin xp media center edition HP 3700 amd athlon computer Newbie here..At the end of start up (when loading) on my computer I get a box in the middle of my screen saying DISCover (on top) then underneath, it says, Socket failed to initialize. I can click OK and it will go away or I can X out of it and it will go away, however I do not feel that this should be happening. Can anyone help.. I will try to give more info as we go. I believe DISCover has something to do with the media edition XP I have?
View 3 Replies View RelatedI've had Win XP Pro installed on a new system for about 2 years now and suddenly nothing wants to work. When I boot up, Windows loads normally but then I get this error message: "TRdww:cwindowssystem32undll32.exe: rundll32.exe" also "The application failed to initialize properly (0x0000005) click ok to terminate application"Upon doing so ONLY Microsoft Word will run. Nothing else will, no internet explorer or any other application. When I reboot in 'safe mode' most things will work...except the printer spooler (I assume drivers are not loaded)I've run several Anti-virus scans and have turned up nothing. I've also done
a system-restore to an earlier time and no change!
I usually don't turn my computer off, but let it hibernate. This never caused problems, but lately, everytime after about a week, Windows became unstable. Part of the text disappears from the screen, like some text from web pages and the text 'start' on the start menu. When I try to start programs, I get various error messages, like 'The application failed to initialize properly (0xc000012d)'. When I close some programs, the system seems to work again for a couple of minutes, but then the problems start again.
(It might also occur when i do not use hibernate, but keep my computer on for a couple of days, but I didnt try this.) It looks like Windows is running out of memory or running out of some other resource? How can i check which resource is exactly running out? Physical memory is 458,224 kB, of which at the time of the problem about 84MB free and 114 MB system cache - not very different from the values during normal use.Kernel memory during time of the problem is total 188 MB - a lot higher than during normal use. However, I don't know what kernel memory is, how to reduce it, and whether it might cause this kind of problems. I am using Windows XP Home SP3. Processor is AMD Sempron 3000+.
Difficulty facing to get to group policy editor via run box and to fix the group policy management snap in.
View 10 Replies View RelatedHello! I am nkraoji I am using Win-XP Professional SP-2.While opening the Group Policy Editor by typing "gpedit.msc" in Run dialog box, immediately a small window titling 'Microsoft Management Console' comes up depicting the following error message :
Snap-in failed to initialize:
Name : Group Policy Object Editor
CLSID : {8FC0B734-A0E1-11D1-A7D3-0000F87571E3}
Problem with getting device manager to display.Right click of my computer properties hardware device manager and I get a window titled "Microsoft Management Console" "Snap-in failed to initalize CLSID:{742468FC-4C96-11D0-ABEF-0020A-F6B0B7A}"I get it that something is missing, but what? I've tried going to the MMC to add a snap-in but the same window pops up again. Everything on this PC is exactly the same as my other one except that one has some DVD editting software. But they were both installed and maintained (updated) equally.
View 4 Replies View RelatedI originally had Windows Me on my pc and lap top. Well I decided to up grade both to xp pro but failed to "read the small print" and now, I can only activate one. I decided to activate my lap top but now, I am unable to use my pc because the activated license is on my lap top. How can I uninstall the xp pro from my pc and reinstall windows Me. I have the start up disk and cd for windows Me. If I can do this myself with help from all you wonderful members, I would really, really appreciate it.
View 1 Replies View RelatedWhen trying to upgrade to MSN Messenger 7 from MSN 6 I got this error mesage UNABLE TO LOCATE COMPONANT this application has failed to start CRYPTNET.dll was not found. Reinstalling the application may fix this
View 5 Replies View RelatedI just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
I am using Windows XP on my laptop and now when I try to boot it gives me a blank screen and says "application failed to start, and then something about the userinit.exe".
View 1 Replies View Relatedwhen i try to download a program and then open it i cant i keep getting a error saying this..The application failed to intialize properly (0xc0000135) Chick on ok to terminate the application. What should i do to fix this? Does that mean i dont have no more memory on my pc or what?
View 7 Replies View RelatedSometime last week I started getting an error message at startup that hirp.exe application failed to start because Frnu.dll could not be found.I couldn't find out anything about these two files on the Internet but concerned that I now get this message everyday.Any clues what these files are,if they are harmful or helpful to the computer, and how to keep the error message from coming up?
View 12 Replies View RelatedWhen i go: Start> All programs > Accessories > System tools > Systeminformation
i get this message ( freely translated from norwegian )
"Windows can't open Help and Support because a systemapplication can't run. If you want to solve this problem, start the application called Help and Support"
Where is the Help and Support application, and what do i do?
The error I receive when I boot up my MSWINXP Partition instead of let my MacOSX Partition (Which I am currently using to boot and type this message.) after I go threw the basic loading window Originally Posted by FILENAME: WINLOGON.exe The application has failed to start because SHLWAPI.dll was not found. Re-Installing the application may fix this problem. Quote: Originally Posted by FILENAME: Isass.exe The application has failed to start because SHLWAPI.dll was not found. Re-Installing the application may fix this problem. The file names are posted above the quote. As you can odviously see, when I boot up windows after the general boot screen, or the "Loading Screen"
View 5 Replies View RelatedThis just started tonite. "The application has failed st start because netpwldryv.dll was not found. Reinstall may fix... I don't want to reinstall, lose to much, what else can I do?
View 1 Replies View RelatedWont open for video and how come tell me you can explain me bout this application has failed to start because msvcp71.dll was not found. re-installing the applacation may fix this problem?
View 1 Replies View RelatedI am getting the following message when trying to clean out the recycle bin Explorer.exe fatal application exit Failed to load application texts immediate exit
The menu bar doesn't work or when you right click with the mouseI'm running xp home with sp2 installed
I've got serious problems. I've just started getting the error message...
This application has failed to start because oledlg.dll was not found. Re-installing the application my fix this problem
when I try to load certain programs (ZipGenius, ExplorerXP & GOM player to mention just 3). I re-installed all 3 but I still get the problem. I also get the same error when try to run a lot of my system security/registry fix programs
I started getting an error message "Application has failed to start because Framedyn.dll was not found". I found a place on the internet where I could download DLL files. I downloaded the file and followed there instructions which were. Save file to the directory that is requesting the file. If that doesn't work save it to your system directory C:windowssystem32. I saved it in the system directory wasn't sure exactly which directory was requesting it. Reboot the computer. If the problem still occurs, try the following: Press start then Run, Type CDM and press enter, Type regsvr32 framedyn.dll and press enter. I did this and ow I am getting an error message
View 10 Replies View Related
