If anyone read my opening posts yesterday, you'll now that i recently bought a new computer as my previous one decided to die on me. I've had my last PC for about 5 years now and, as you can imagine, i would have set it up and organised it according to my needs.Having bought a new computer, I am really suffering trying to get things set up as they were and wondered if there was any short cut that would allow me to get my old set-up as quickly and painlessly as possible.Both the old machine and this one are running XP and I have the old hard-drive sitting on this one as an external hard-drive.
I just went to create a new user account on my computer and found an account i didnt make called "asp.net.. machine account a" what is this and what should i do?
im setting up a user account for my daughter on a pc with XP. is there a way to set it up to where she cant download or install anything when shes on the computer?
Seems I have been trying for months. getting my network setup, put in my ISP disk which sometimes has worked and some times not. I get links and places I am sent the next thig I know I can't even boot up.
I need to create a user profile on my XP Media Machine I've created one.But was wondering if there's a way I can limit what they do on it? Such as not allowing them to download anything? I'm new to XP and need to have a way to control the other user on my machine.
Follow the steps outlined below. Go to start/run type in regedit and click ok. Click on the HKEY_USERS branch (to highlight it). Select File on the menu/Load Hive. Navigate to x:Documents and SettingsDefault User folder (where x houses the Documents and Settings folder). The Default User folder is hidden by default. Open the ntuser.dat file. For the Key name: type in the word tweakxp (actually you can type in anything) and click ok. A new subkey named tweakxp will appear under the HKEY_USERS branch. Navigate to HKEY_USERS weakxp[remaining path to the restrictions/tweaks you want to set] Add in the applicable values and value data. Go back to the subkey tweakxp and click on it to highlight it.
Does anybody knows how or where to setup a default user environment variable ?We want to create this variable for each user that logon in to the same pc?
I'm trying to set up a functional limited-user account (windows 2000 pro) that runs painlessly. I know it's a pain setting them up, or I am just really struggling.If there are any usefull guides anyone could provide a like to, or solutions,I am faily knowlagable with computers, but setting up functionable limited-user accounts is over my head. My goal is to run NOT as admin anymore.
I have set up a limited user account in XP home.But I do want to have my Adaware and SpyBot S&D and other security programs on that account.I tried copying and pasting from the program files but I get error messages.Is there a way to get these security programs on a limited account?
I want to restrict access time of one of the limited users on the home computer running Windows XP. Can I do this as administrator? I saw some instructions posted earlier but I don't know if they were for Windows XP.
Way for me to change the logon option setting to Ctrl-Alt-Del? In W2K there was an easy checkbox setting in users from the control panel. And upgrading to WXP kept that setting. With WinXP preinstalled in a notebook, the logon screen comes up immediately from power up. I would like to require the intermediate step of manually pressing Ctrl-Alt-Del keys before the logon screen appears. I'm willing to reinstall W2K first and then reinstalling WXP as I also want to replace the existing notebook hdd with another larger capacity drive if I cannot find an acceptable answer soon.
I notice that in the c:documents and settingsusernamelocal settings that there is a TEMP and a TEMPORARY INTERNET FILES directory.When I delete the temporary internet files in explorer let's say, the files are gone in the pathname above mporary interent files. My question is can I just go and delete the files in the TEMP folder manually as well? without damaging some other program applicaiton operations?
Wanted to skip the Login screen on my Windows XP computer and login to my account automatically, so my computer would boot faster. I used this ( http://www.mvps.org/marksxp/WindowsXP/welskip.php ) guide. So, i went to Start > Run > I entered in "control userpasswords2" and hit "OK" > I unchecked the box which states "Users must enter a username and password to use this computer" and applied the setting > The computer then requested the username and password of the account I wished to automatically login. This is where I think I messed up. By default, the username box is filled in with "Administrator" and since I am the administrator I did not change the username to "Ben" (which is what my accounts name is) and I left the username box filled with "Administrator". Also, I left the password blank (this is because I have no password). Now when I try to start up my computer I am stuck on the blue screen stating "Starting Up" and I never get to my desktop. How do I fix this (meaning, how do I change this setting back)? Can I boot my computer into safe mode and then change the setting back, or is there an easier way to fix this?
In attempting to install a router I inadvertently setup a confusing array of user/administrator accounts which leaves me unable to log in as administrator. Two things 1) My description of the problem leaves people confused and unable to help. 2) Given that people can't really know what my intent is in trying to log in as admin. there are obvious ethical issues involved. It's understandable. I want all those user accounts wiped out so I can just start up without logging in as I did before. Will re-installing Windows do that?
All the systems on my network about 30 systems all running windows xp pro with service pack two keep deleting user profiles the sytems all connect to a win2k domain controller. users keep having problems opening their files or changing system settings even though they were originally configured as administrators on their systems wondering what the problem could be.
I don't know if anyone else has this problem, but my XP switches to the 'switch user' setting every time the screen saver comes on. It gets really annoying so I wondered if anyone could tell me how to turn it off.
I just finished a complete reinstall of Windows XP. Before the re-installation, I partitioned the hard drive. I want the basic Windows XP system files and drivers on my "C" drive and then I want to accumulate data files (word processing, spreadsheets, photos, music files, etc.) on the new partition which in this case has been labeled the "G" drive. The difficulty I am having is getting getting the "Documents and Settings" to move over to the "G" drive. So that when I want to load photographs from my camera to the computer it goes for C:Documents and SettingsMy NameMy DocumentsMy Pictures. Instead I would like it to go to G:Documents and SettingsMy NameMy DocumentsMy Pictures. Using Windows Explorer I changed the file name of "My Documents" to 'Windows XP old path My Documents" and then I was going to set up a new path to the "G" drive through Control Panel>Administrative Tools>Computer Managment>Disk Management.
However I noticed that when I clicked on Start in the bottom left hand corner and it puts up that little window that "My Documents" which was listed now had the new title 'Windows XP old path My Documents' which I believe means I haven't gotten to the proper place to change the main configuration for Documents and Settings. Long way of saying how do I change the basic configuration for where Document and Settings are stored to a new location.
I am trying to fix a friends computer my usual story. Once it gets to the user screen for user selection both keyboard and mouse stop working, its either they stop working or the computer freezes, i am not sure. Life still goes to the mouse as it still lights. The keyboad works fine in the bios but not at freezing point.
For security reasons, Microsoft does not allow parents (computer administrators) to check on, maintain, adjust or otherwise enter their kids' (limited users) XP profiles without either resetting their passwords or waiting for them to come home and being confrontational about it.Ideally I would like to be able to log on to a limited user account from my administrator account without tampering with anyone's passwords-resetting them or otherwise. Actually, I have little interest in the (step) kids' personal life and stuff. Alternately, perhaps you may help me with my ultimate goal: limiting screensaver activity:
as soon as i log in instead of welcome screen to choose logins i go to a dialog box where i have to give my password and usernam... i tried to change this by going to control panel and user accounts. as soon as i clicked on "change the way user logs in or logs off" i get a error as 'A recently installed program has disabled the welcome screen and fast user switching . to restore these features , you must uninstall the program. the following name might help you identify the program that made the change - KLGina.dll"
so i tried to delete i couldnt ... eventually it got deleted by software "unlocker" but as i log in again an error as "please contact system administrator as klgina.dll is missing'.. i got that back again by system restore..
what i want to accomplish is to set an user account type automatically after creating one. as you may know, when you create an user account the system ask you what account type to apply for that new user. the default choice are: Administrator and Limited. i want to create an account that is not too limited but neighter with same privilege as an administrator. i went to the Local Users and Groups at the Microsoft Management Console (now on MMC) and assigned a different Group to each users i desired. task accomplished. but...
the problem is that i don't know how many user the computer will have. the owner of the computer are primitive human that don't know how to configure the system. i neighter want any of them to have administrative right because they have internet access and they still on the experiment process. meaning that they're propense to click 'YES' to any message even if those are viruses (most of them don't read english). the solution i thought was to assign only one user the administrative right so they can install and uninstall software and perform other administrative task as creating more user accounts. there is anyway that after creating an user account the system automatically assign the user a specific Groups? for example the built-in object Power User. or among the choice on user account tool add an new item or modify the existing items. or if there is anyway to modify the privilege and right for an built-in object Group. the Limited account pertain to the User Group, so instead of automatically assign other group, the new account inherit the privilage/right/limitation from the default group.
Operating system: XP home.When creating a user account for my husband with limited access, I lost my user account as administrator. My guest account has also disappeared. I cannot download or do anything because of the limited access that my husband has. How do I get back/show my user account with administrator access?
I'm going to create 30+ user accounts. They will be all running at the same time, running the same program. (the only way I've figured out how to dual-boot the same program) and I was wondering... Is there anyway to make it somehow use less resources doing so? Like, so far I've gone into Advanced > Performance and killed the switch on everything. I was just wondering, after days of running non-stop, it is bound to start eating up RAM or even cache to much, right? If so, what can I do to stretch the time this happens in? What else can I switch off/disable for each user to eat up less resources?
Does one group take precedence over the other. I had a situation where the user's accoutn was in both groups but when trying to install software,it appeared as if he did not have enough privileges. One of my technicians signed in as administrator and was able to install the software without a problem. When he signed in as the user who was in both Power Users and Admins, he said the install did not work. So the general question is how does Windows decide how to apply group membership roles.
I am having some issues with trying to share files on my home network.My first questions is,are the names listed in user accounts, (in the control panel under user accounts) have to be the same as user profiles listed under my computer in order to share files on my home network?
