First off, I purchased my computer back in 2004 preloaded with Windows XP Home. Just last week, I got a serious virus on my computer. It disabled system restore, wiped all restore points, disabled windows help, and deleted some important files. I went out and bought a new copy of Windows XP Home SP2. It installed fine at first. But, once I logged on, I realized my color setting and screen resolution were very low. A message popped up on my system tray saying something about screen resolution and color were very low. It asked to fix it. I clicked ok but nothing happened for about 2 minutes. Then, I went into display settings, and saw the settings were the lowest.But, the slider for screen resolution was set at 640 x 480. I tried to move it, but it wouldn't move. Also, the drop down list for color quality only had one option, "Lowest (4 bit)". I restarted my computer, but it was the same. I cant change it. On the old copy of Windows, the screen resolution was 1024 x 768, and the color could go up high. I forget the setting though. Also, I did not change my monitor. Does anyone know whats wrong or how to fix it?
This strange behavior started happening recently on otherwise solid workstation: Every other time i reboot my computer, the display resolution will have dropped back to its lowest setting; (800x600) When i try to set it back up to its highest Resolution setting (2560x1600) it sometimes will not allow it and drops back to 800x600. Other times it crashes to Blue Screen of death, then reboots itself. Sometimes when I launch Adobe Premiere Pro 2, the computer crashes to blue screen of death.
I just reformatted my computer a Dell, Inspiron 8100, Windows XP home edition. Screen resolution default is 1600X1200 Pixels. I like 1024X768. When I change the resolution to 1024X768 or any other setting available the screen just gets smaller. There is no change in "Screen Resolution.
I have installed all the updates and SP2. Auto-updates seems to be doing fine. I downloaded new NiNida drivers from Dell, etc. I've removed and reinstalled the video drivers several times.
I just bought a gateway media center computer 835gm with fpd1760 monitor 17". It came at 1024x768 setting for moniter. What are pros and cons of changing resolution to higher one? Max available is 1280x1024.
I know one downside of increasing resolution is I'll need to change sizes of fonts and icons etc. Will higher setting slow down the computer. Do you think higher setting will be preferable since I do a lot of digital photograpy work?
I changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
My PC is a Dell Dimension 4600, using Windows XP Home Edition. I had problems getting online, Comcast Tech came out to help, no help from them, found out myself that somewhere I had lost a driver, reinstalled, back on line, but with problems. I cannot seem to get the screen resolutions to look like I want it to. The following is what I have and it looks great, but does not fill screen and letters so small. DISPLAY PROPERTIES: Themes-Windows Classic Modified. APPEARANCE: Windows classic Style. COLOR SCHEME: Same as above.
FONT: Normal. When I click on Screen Resolution Tab it shows the following: 1280 by 1024 Pixels, Color Highest 32 bit. As I stated above, it really is so clear, (letters, etc), but does not fill screen. Also, when Tech was here he installed WindowsXP again, so now I have two of the same and the fact that they take up so much space, I had bought "The Print Shop" before all this happened and now I cannot not install.
My computer is infected. I have ccCleaner, Spybot, Ad-Watch, Ad Aware, Windows live onecare. I have ran them all but I am still having problems. When I log onto Internet Explorer I get a blue screen that tells me I need to reset my security settings in order to view my home page which is road runner. I followed the instructions and nothing. I cannot view any flash sites. I tried to see if I am missing a flash player and I cannot locate one. When I try to download Adobe Flash Player, I am unable to do so as the download button does not appear on my screen ( I know where the button is supposed to be because I checked out the site on my daughters computer,which I am on now). I also tried to download other software to help with the spyware and malware, however the minute I hit download I either instantly get disconnected from the internet or I get an error message that says " Internet Explorer has encountered a problem and must shut down...". I have gone into safe mode and ran spybot and the others and still no better. I am getting a message that Windows Firewall is disabled, however when I got to it Its grey and it wont let me turn it on. I have been trying to fix my computer for days and am completely fustrated,
I just upgraded my Dell 4300 XP Home Edition to SP2. When it rebooted, the welcome screen was in blue and white instead of its usual color rich format and the background resolution was really poor quality.A window popped up and informed me that my settings were set too low and asked whether I wanted Windows to auto correct the problem. I clicked "yes", but nothing was resolved.
I am having issues with my Screen Resolution. Everytime I log into Windows it defaults the settings to the lowest possible settings, 640x480 ( 8 bit ). I change the Settings back to what I like, restart the computer and it will login with my settings then the screen will go blank for a couple seconds and reset to the lowest settings again. How can I fix this?
My Windows XP (SP2) screen display is set for 32 bit color. Whenever I open Outlook (Office 2003 with all updates installed), the screen blanks, then reloads with 8 bit color. If I change it to 32 bit while Outlook is open, after about 30 seconds, the same blank-reload happens. When I exit Outlook, the sequence reverses, (blank -32 bit reloads). I have tried resetting my display resolution, from every program, nothing works. Interestingly, changing from a CRT to an LCD monitor has made no difference at all.
i just installed a new copy of windows xp pro. the screen resolution before the fresh istall was fine. i had all the options. i like my windows small. and now the only resolution i can get on is 1280x1024.. how can i fix this? do i need drivers?
I am struggling with the best options for the LCD screen on my Dell laptop which has a NVIDIA GeForce2 Go video card.The ideal resolution setting for this video card and screen is apparently 1600 x 1200, but that makes things too small for me. So I learned about the dpi setting in Display PropertiesSettingsAdvanced screen. However since this magnifies things for the same resolution, I am not sure why that is better than just using a lower resolution or even what the difference between the 2 options is.
I just got done reinstalling XP and now am having a few problems. I can't seem to be able to adjust the screen resolution/color. I don't have any sound. And I get messages about errors in the regisitry telling me to go to http://fixreg32.com to fix them (spyware?).
The video card on this computer would just cut out from time to time, and i'd to have re-set the cable for it to work. i figured theres a loose connection, so i got another video card to replace it with, since this is a work computer.So after installing the new (actually its a used video card, ASUS v7700 TIvx, but still definitely works) video card, the computer starts up at the correct resolution, 800x600. It looks fine, but when you drag anything or scroll on a web page, the video lags. So i found the correct drivers and installed them, and rebooted.
The computer reboots in 640x480 at 4-bit color quality. when i change the resolution to 800x600 at 32-bit color quality, it just defaults back to 640x480 at 4-bit. i found that i can change the resolution to 800x600 at 4-bit, but when i try 16-bit or 32-bit quality, it just go right back to 640x480 at 4-bit.i thought maybe it was the video card, and tried to install the old one again (its a geforce 2 mx card). so i re-install it and install the correct drivers, and still the same exact thing happens, (prior to any of this, the geforce 2 mx card worked fine at 800x600 at 32-bit) i can't get it to correctly change to 800x600 at 32bit, it just keeps defaulting back to 640x480 at 4-bit.
I updated Windows XP to Service Pack 2 yesterday. After installing and re-booting, the screen resolution and the colours of my monitor have changed (big icons and only four colours), which makes it look like it was in Safe Mode (which it isn't).I have tried to change the screen resolution and the colours under Display properties - Settings, but it only gives me the option of a screen resolution of "640x480 pixels" (the slider won't move) and colour quality of "Lowest 4 bit".I presumed it was a driver issue so I have tried to uninstall the graphics controller in the device manager and re-install it with the latest driver.
all (after reboot it defaults back to the 4bit VGA), so I am using the xp driver(nv4_disp.dll). This works well except that there is a 1inch gap on the right of the screen that isn't being used. The resolution is 1024x768 and when i move my mouse to the right edge it scrolls the screen over. I know that part of the screen works because when it boots there is writing right up to the edge. I have tried 800x600 and it does the same thing.
Now for the problem: every time I restart my computer or maybe just close and open it again after a hour, the screen resolution is at 800x600I keep resetting the resolution to 1024x768 (that's the highest resolution my laptop can take without me having to scroll down to the start menu), but the computer just resets itself everything I turn it off. It's as if I did nothing. I'm pressing the "Apply" and "OK" buttons in the window, and I can't figure out if there's something else I should be doing.
I'm having trouble either writing code for or finding a freeware utillity to read the current screen resolution.I need it to be accurate, and I need the resolution to be output in the format: {Friendly Name} {width} {height} {color depth} {refresh rate}I should probably have it list all of this one line each, output to standard output.
How can I change the resolution of Windows XP bootup screen? i.e.The screen of Windows XP logo with a blue moving bar(Change from 640x480 to a higher resolution)
After i installed SP2 on computer i can set my screen resolution to a max of only 1024 by 768 pixels. But before with SP1 I could increase it to max of 1280 by 1024 pixels. I tried searching for drivers online but couldnt find any that would solve this issue How could i fix this problem since i really like the other resolution better??
1: Because of my eyesite I always have my screen resolution set at 640 by 480. On the computer with XP it is not avalible. Is there different drivers or a program that will let me make 640 by 480 avalable? If so how do I go about this?
2: I have 2 computers that are virtually the same. Both have XP Pro opperating system. I am the webmaster for a couple of sites. there is a menu at the left of the site. On one computer the menu will display on the other is will not. The menue is an applet code . Is there a setting on the second computer that I am missing to display this menue?
3: for years I used Norton. When I loaded XP I used it a day or so and then loaded Norton on that PC. It slowed it down very much. So much that I took it back off. Now I need a suggestion on what virus scan will be as good as Norton but not slow my PC down so much.
I'm running WinXP SP2 with all the latest patches recommended by Windows Update.I have logged onto this machine as Administrator. I set the screen resolution to 1024x768. It should stay there unless the user changes it, correct? Well, the user logs on and at first, the desktop looks like it's going to be 1024x768... but after the desktop icons appear and a couple of the Systray icons, the screen goes blank and resets to 1280x1024. The user can set the resolution to 1024x768... and the next time they log in, it will reset itself to 1280x1024. This ONLY happens if the user is a member of the "USERS" group; if I make them a member of the "ADMINISTRATORS" group, the resolution will stay put.I would almost think it was a group policy issue, but if it is, why does it affect no other members of the group? And how did I set such a policy?
I reformated my comp with xp pro and everything was alright, including the authentication. Setup the display and all.
Problems comes when I restart or bootup when I'm done with the comp. On bootup, it opens up a window saying windows will automatically adjust the screen resolution, and I have no other option other than click
Installed win xp but unalble to change screen resolution from 640X480 pixels. Res. Color quality (medium 16bit). Slider will not move. Can’t change dpi setting.Posted using the http://www.windowsforumz.com interface,at author's request Articles individually checked for conformance to usenet standards Topic URL: http://www.windowsforumz.com/Video [...] 50570.html Visit Topic URL to contact author reg. req'd.
I've recently replaced my old LCD PC monitor with my TV LCD monitor which is 20"however the only time I can read writing clearly is when I set the resolution to the TV's stats at 640x480 - very clear but the prob is that everything TOO big so I can't get around the screen. How do I keep this clarity at 640x480 but make everything fit the screen?I've tried different resolutions but nothing works as clear as the above.
I have a Dell Dimension 2400, with Windows XP Home Edition. I installed Symantics PC Anywhere 9.2 and it reset my screen resolution to 640x480, I've tried to change it to original setting of 1024x768 but it won't let me change it.
Since installation of Home Ed with Service Pack 2 there have been no problems with this computer I decided to change the monitor resolution to make reading a little easier and did thid Control Panel/Display. Rebooted for changes to take effect and the normal Windows screen appeared (showing the progress bar) and then when I expected the 'Welcome' screen to appear all that I get is a small window showing the words
I just reformatted C:, and reinstalled XP Professional. Works like a charm, but every time I try to install SP2, I lose the screen resolution; it changes to a max of 4 bit color and 480 x xyz pixels as my only choice. I reloaded the monitor drivers for the hp pavilion f50 monitor, but that doesn't help. I finally loaded SP1, and that is fine, but I cant get SP2 to allow decent screen images... and SP3 had some other error when I tried to load it, and it wouldn't even try to install.
