Return From Standby, Hibernate, Locked Screen Takes Over A Minute To Show Desktop?
Mar 9, 2007
Basically anytime my computer requires my login and password to get back to the desktop, after I hit <enter> it takes way over a minute to come back. I can hit <ctrl+alt+del>, then <k> to lock the screen, immediately try to log back in and it will take over a minute to show me my desktop again.I don't know where to begin to troubleshoot this. I also have Ubuntu installed on a separate partition and grub is the bootloader; however, I don't see how this could affect my WinXp install since Ubuntu is not running at the time.
My friend has a toshiba laptop. In that once windows XP was reinstalled. Now it has win xp pro sp2. Anyways everything is fine but in shutdown there are only 2 options - turn off and restart. The standby option is grayed. how do i activate it. Moreover windows media player 10 is unable to play dvds.
Every time I try to do a search for a band or a show on Ticketmaster, it takes me as far as the loading screen. No matter how long I let it load, it just wont move past that screen. Similar issue with IMDB, site works fine until I try to play a video. I get a whole lot of nothing. No matter which web browser I use, I get the same results.
Every time I startup or restart my computer, my load takes around 20mins ! I have a Compaq Presario V2000. When I power or restart, the screen goes black, everything flashes, then the Compaq screen shows for about a second (guessing is the BIOS because it lets me hit F8 or whatever) but then after that it goes to a black screen with a status bar at the bottom. Slowly the status bar fills up. At around 20 minutes, which the bar is half way, then the computer flashes again and the XP logo shows and loads normally afterwards.
Im having no more problems with XP or anything else except that startup screen. People tell me its the BIOS, others tell me its not recognizing the Hard drive fast enough among other things. My BIOS boot order is basically CD first then HD. I have tried so many things with no success. And its getting to the point that I cant do anything when it comes to updating stuff without having to restart, which takes those 20mins.
Double-Clicking on a Document Takes a Minute to Open. For example, I double-click on a PDF, word, excel, txt, jpg, file, it takes between 45 seconds and sometimes even 75 seconds for the application to open. If I however open the aplication first, even by double-clicking the desktop shortcut for the application, it opens immediately. From there, I can locate the file to open which also opens immediately. Also, right-clicking on a document takes also 45-75 seconds for the context menu to appear. Sometimes it doesn't even appear. I've tried many "cleaners" out there such as Ccleaner, registryfix, Cleanup! and others. I've also permanently deleted temp files, temp internet files, cookies, history, files, etc.
I have re-installed windows XP home using the OEM Key on my laptop. Prior to the re-install, it would allow me to put the computer onto hibernate or standby, now post re-install, I cannot put the machine into standy by.
My Daughter has a dell inspiron 1200 running XP that is about 5 yrs old and had slowed to a crawl, so she bought a new one when she graduated from college. I reformated and reinstalled XP and all the drivers and added a gig of ram. Runs great now but now the standby or hibernate is no longer active and I can't figure out what to do.
Hibernate and Standby were working fine on the machine. But since about a week. Both the Standby and Hibernate feature are not working. The detailed explanation is given below. I have three account profiles all set to admin. The computer does go on standby or hibernate when on the welcome screen but only if no one is logged on. If I have logged on, and then i select standby or hibernate nothing happens. After this if i try to shut down the computer it kind of hangs halfway through the shutdown process. It seems that it is trying to hibernate and shutdown at the same time.
If I have not requested for a hibernate or standby, and then try to shutdown the computer. It shuts down properly. if I log-off to the welcome screen and no other account is logged on then also the hibernate and standby work fine. I have tried to run system restore, but when it boots up in the restore process, i get a message that no changes have been made try another restore point... i have tried many points but it does not work.... am totally confused. I have also reinstalled the patch on the Microsoft website for XP where a machine with more than 2Gb of ram needs to hibernate.
My Dell Mini 10V netbook, with Windows XP, SP3 won't standby or hibernate. It hangs at the "Preparing to Standby". I have to completely shut it off by holding the power switch. It reboots fine. It will shutdown without delay, but it doesn't save the desktop layout. I've tried the clean boot and it still doesn't standby. I'm doing the testing without the external monitor, keyboard, or mouse and it doesn't make any difference. It has all the original hardware. It would standby when I first got it and I have another Mini 10V that does standby and hibernate correctly.
Looking for work-around solution standby/hibernate failure in WinXP system after installation of PGP 6.x.
Problem is completely described in Microsoft KB article Q-314118 http://support.microsoft.com/kb/314118/en-us
I am presently using PGP 6.5.1 and want to keep it. I'm using it for the PGPdisk features with encrypted volumes (directories). It works fine in WinXP with both existing PGD volumes that I have (from previous systems) and it also works fine with newly created PGD volumes. The only problem is that it prevents WinXP from entering Standby modes when I attempt this power down feature in WinXP for my laptop.........
After a huge upgrade and fresh XP installation (up to SP2), my computer won't standby hibernate. The only parts that remained were the HDs, RAID card, and power supply. MOBO was upgraded to X38, GPU to GF8800GT, and CPU is now Dual Core. Prior to the upgrade, my PC could go into standby. Now it is "grayed out."I went to power management, hibernation tab is not there. I tried reinstalling MOBO drivers, same thing. My comp used to be able to do this in XP. Well, I read about it, and supposedly, dual core cannot go into standby (or at least winxp doesn't want to allow the user to do this with DualC). Is that true? Edit: I even tried the hotfix and disabling terminal services. No effect.I tried apmstat -v, and it said that this is an ACPI machine and that APM is not relevant.
whenever i set my laptop to hibernate when i press the power button or close the lid of the computer, it always changes my settings to standby mode. what can i do to stop this?
I recently installed SP3 and IE8 along with all updates. All went well except now Hibernate and Standby often kill the system including the cursor. If I boot and try Hibernate or Standby it usually works, but if I run for a while and try them they hang the system. The problem did not exist before I installed SP3 and IE8.
I have my laptop set so that when I close the cover and the machine is on it suspends. When I open it and try to get it to turn back on it won't. I have to restart it using the power button.
I have a Dell running Windows XP. My IP has been changing often with the upgrades from my cable company (I have high speed internet service and I use a router), making it impossible for me to get onto my company's websites due to the firewalls. Causing me to have to wait until a supervisor comes on for me to work. I shut my computer completely down when I am done with my shift. Someone has suggested that I put my computer on Standby or Hibernate it to avoid the IP from changing.
1. If I use hibernate of standby will that stop the IP from changing since I am not really shutting it off? 2. How do I come back from hibernate or standby? Everything I read in my help section tells you how to put the computer in that state but not bringing it back up. 3. Will not completely shutting off my computer cause more wear and tear on it, making me have to get another one sooner?
I run Windows XP Home. When I close my notebook and / or put it into standby mode it won't come out, it just gives me a black screen and I have to power down manually. Also, when I try to put it into hibernation mode, it gives a blue error screen that says the system has shut down Windows to avoid damage.
I'm using a Compaq Desktop PC. Would you suggest that I enable either Standby or Hibernate mode? BTW, do you put your desktop at a place where there's ventilation to keep it cool?
For years I shut down the computer every night, then turn it on in the morning, but some one told me I should just leave it on all the time and use the Hibernate feature under the Power options? I've never become familiar with this or the difference between Hibernate and Standby. I have ZoneAlarm Pro as a firewall, along with Earthlink, which stops span and scans for virus email before I can dl it, so I feel sort of save there, but am not sure about this. I also have an APC back up power supply to cover me against power failure, and it will save and shut all programs down and turn off the computer after waiting a few minutes. Is it better to leave the computer on all the time and have the HDs turn off after an hour or so, the monitor turn off, and then have the computer go to Hibernate mode, instead of rebooting each day?
how to get standby and/or hibernate and/or sleep buttons when shutting down? I installed Dell reinstall sp 2 as a clean OS. However the standby button is greyed and can not be clicked. only shutdown and restart available. how to get or install standby and/or hibernate and/or sleep buttons when shutting down ? is there a software dwnld. from dell?
After putting my pc on standby or hibrernate, about 20 min later it turns on again, restart and shut down work fine, so i always shut down. no errors or anythingthe hibernate and standby work fine, its done correctily and then the pc wakes itself up in a half hour. please tell me why. ive made sure there are no tasks set so its not that.
I just installed XP Pro SP2 onto this toshiba laptop (fairly good;1.4ghz intel celeron M,512 ddr ram,wireless nic,ati graphics and such) and it seems that standby and hibernate wont work AT ALL. Standby is grayed out in the turn off computer menu and the hibernate tab does not exist in the power options utility in control panel. I've googled around a bit and found no specific option in the BIOS to enable or disable it and as far as i know this laptop SHOULD support it...i mean come on what kind of laptop doesn't standby or hibernate?
When I press the hibernate or standby button, the computer just exits the shutdown screen and nothing happens at all. However, Logging Off, Restarting, and Shutdown buttons all work fine. I first ran into this problem when I installed Internet Explorer 7, which I downloaded from the website www.oldversion.com. I do not want to uninstall Internet Explorer to try to fix this problem cause I installed it so that my wireless usb drive would connect to the access point and connect to the internet.
I use P2P and my machine runs overnight, 24 X 7. I have also noticed a sizeable jump in my electricity bills and then that's obvious. I was planning to cut down the power consumption[ @ nights] by keeping my XP either on 'standby' or 'hibernate' mode. Question is , will my P2P[emule or torrent] fall off with either of these two getting activated? Basically my ideal situation would be power consumption + P2P running in the backgrd.
My HP OfficeJet R40xi works just fine when I boot up or re-boot my desktop PC, but if I've shutdown to "hibernate" or "standby" I consistently get a "This document failed to print" error message. This problem started after I installed the SP-2 patch. I've double checked my parallel port settings in system BIOS and Device Manager and I've removed & reinstalled the driver but so far haven't found a solution.
I have configured the powermanagement of my Windows XP clients (XP Prof. SP1 and SP2). I have setup the computers to enter standby after 1 h and hibernate after 2 h. The clients successfully wake up on LAN traffic.I would like to monitor the standby, hibernate and wake up events in any kind of event log.
i have a dell computer windows xp. Whenever i turn on my computer it log in and everything right but show no start bar or destop icon it just show a blue show screen blue i can get to task manger but when i try to open a program nothing happen
This computer is an HP/2.8ghz/512ram/service pack 3 system. It use to run nice, now it boot's slow, slow, slow! It takes 10 minutes to get all the icons loaded, then it works ok. In addition to the slow boot, it also hangs at a black screen, I get around it by pressing F1, then it loads ok. Safe mode loads normally about 2 min.
Currently using XP Pro, SP2 with P4 3.2, 1GB RAM, 80GB HDD (90% free). While using explorer to open a folder and display the files in it, the illustrator (ai) files (hundreds of it in one folder) were shown with the generic/windows system icons first and gradually been transform to the Illustrator files icon. The process took so long and made a system in hold/freeze. It happens as well when tried open files using File Open in Adobe Illustrator or Design in the very same folder and files. I've tried solve it using Display Appearance Effect as well as using regedit to modify the value on Max Cached Icons in registry but didn't work.
