After receiving BSOD, I rebooted and now have a black screen. When hit F8 to try and start in Safe Mode get these on a black screen multi(0)disk(0) rdisk(0) partition(1)WINDOWSsystem32 toskrnl.exe
View 5 RepliesI have a Dell Dimension 4550 desktop running Windows XP, SP3. I have 2 problems. BSOD on waking from Standby mode about 80% of the time - must reboot. Error message is: Kernel_Stack_Inpage_Error. Codes are: Stop: 0x00000077, (0xc000000E, 0xc000000E, 0x00000000, 0x05DB7000). Beginning dump of physical memory.This has been going on for a couple of months. When it first happened I could think of no new software that I had added recently. I'm also getting a black screen on startup about 70% of the time. Messages: Primary hard disk drive 0 not found. Strike F1 key to continue, F2 to run Setup Utility. When I hit F1 key, the error message just repeats endlessly, have to reboot to get out.
View 4 Replies View RelatedI just joined here and Im having a really abd problem with my computer. The specs that i know for sure) are:I booted my comp a few dyas ago and out of nowhere I get a BSOD before that screen with Windows XP comes up. I say to myself "ok, maybe its just one time" and reboot. I get it yet again and reboot. I finally get to the windows log in screen and I get ANOTHER BSOD after it finished loading. Restarted again, worked fine. I analyze my minidumps and it said the most probably cause of these crashes was hardware. At this point I recall a computer technician saying the capacitators on my mobo were bursting, but this was a good 8 months ago, so Im not sure if its FINALLY giving out or if my RAM thats failing.
View 3 Replies View RelatedI was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies View RelatedI think of myself as an intermediate compuet user. Recently when i rebooted my computer, windows didn't load. I have Windows XP. The start screen with the windows logo and the blue bar runnning across the bottom loads but then when it usually goes to the pick user screen it only comes up with the Windows XP logo and stops loading.Does anyone know a way to stop this happening. (I am on a different computer at the moment incase you're wondering)
View 10 Replies View RelatedI've had an infinite reboot cycle for the last 3 days now, and I still cannot figure out why. I have been looking at other cases and are quite similar to mine but not exact. This is my problem
I have XPP and one day my computer got a BSOD. Then through out the weeks it had a few (5-6 maybe) BSODs. And one day I started up the computer and it went to the windows splash screen, the logo, and rebooted itself. Being frantic on my 6 month old computer, I let it reboot by itself...and it went on like that for a while. It continues to ask me if I want to start in safe mode, safe mode with networking, safe mode with command prompt, the last good known configuration, or start windows normally. I have tried all of the options and they lead me down the same road...infinite and continuous rebooting at the logo.
its my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
View 4 Replies View Relatedfriend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
View 5 Replies View RelatedMy computer screen freezes up after a while, then turns into a blank light blue screen and then into a black screen. I have used regcure, PCMedkit, and PC Doc Pro I have also tried some of the online help for a fee but nothing seem to work. Lately when trying to reboot I got a blank red screen. I'm using xp pro and a Nvida GeForce 9400GT GRAPHICS CARD.
View 18 Replies View RelatedI have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View Relatedmy computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies View Relatedwhenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
View 5 Replies View RelatedWas working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies View RelatedI start up my laptop with the screen closed. When I open the screen I see the XP login screen for a second and then the computer goes black. I can't do anything else.I have Windows XP Home with the service pack 2 (I regret installing it).I never had any problems before. If you know how to fix this let me know.
View 6 Replies View Relatedwhen I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies View Relatedwhen i take a screenshot and paste it to a word document, it comes out black. I do not know where the problem is, word or printscrn? how can i avoid that issue?
View 6 Replies View RelatedI'm getting a BSOD. Everything seems fine--it is at least getting to the boot.ini since I get an OS selection--W2K or the Recovery Console. The W2K splash screen comes up, the blue hash marks scroll about half way across the bottom, halt, then BSOD "INACCESSIBLE_BOOT_DEVICE". I tried the Recovery console, but that BSODs as well. I used ERD to run CHKDSK --- no errors. Possibly the hdd? ERD took a loooong time to read what OSs were on the hdd--five minutes.
View 1 Replies View RelatedI get the following BSOD driver_irql_not_less_or_equal Stop 0x000000D1 (0x00000000, 0x00000002, 0x00000008, 0x00000000) Interestingly tho, I only get it when launching l4d (left 4 dead) randomly. I normally have virtual memory disabled but I enabled it and launched/exited l4d about 25 times before I got it to blue screen and get a dump file. Otherwise my computer is solid. Running windows xp sp3 with all the latest patches, vira/malware free. Asus P5k-deluxe with q6600, 2gb crucial memory.
I already run memtest86 for 16+ hours. no errors, prime95 torture test for 12 hours no errors. As stated this only happens immediately after i launch l4d, if it doesn't blue screen on startup. it runs fine. I ran dumpchk to try and get an idea of what driver is causing the crash, but I really have no idea what to look for in the output. I also play css, which uses the same game engine as l4d and never have any problems with it. I attached my dump file, any help would be appreciated.
The machine does the usual, POST etc, does all its checks and then goes to boot from the HDD(HDD is indicated in BIOS etc). At this very stage (just before the WinXP splash Screen) the Screen (LCD) just goes black and does not ever recover. There is no error messages and the HDD LED blinks a couple more times then does nothing. LCD power light stays on green. I have to either turn it off via power button or do a restart with Ctrl,Alt + Del.
I have disconnected all peripherals except Video Card, HDD and still no luck. The only reason why i left the Video Card was that there is no onboard video and i had no other Video cards to replace it. I cant even boot into safe mode.I manage to resolve the problem by doing a WinXP repair over the top but what i really want to know is, was it a corrupt/damaged MBR that was causing this problem or was it a corrupt driver? I have read a few articles about nVidia cards giving black screens but none seem to be similiar to mine.
When ever i start up windows it get threw the Windows boot screen then whens it suppose to come to the logon screen i see only black for no matter how long i leave it on!, i can still move the mouse, and thats all that happens i have a operating system cd, and if i got to repair windows what config do i type?
View 2 Replies View RelatedI changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
View 1 Replies View RelatedI am trying various screencapture programs, but when I try to select an area of the screen to capture, all I get is a black 'box' of the are where I snap'd -
View 1 Replies View RelatedI have a Dell Latitude D400 laptop. After reloading windows I get the Windows startup screen and then I just get a black screen...Windows will not come up. Anyone know what I can do?? I get the mouse and can move it around but no windows screen. I have done the diagnoics test and found a DST Short Test failed with code 1000-0146 is this why Windows will not load? Is my harddrive bad you think? It reloads Windows fine but Windows will not come up after install? Again all I get is a black screen with the mouse to move around.
View 4 Replies View RelatedI have been getting zappings when i first boot on my pc (running XP Pro). The start screen is black and I see some white static light (lines?) whenever I turn on the pc before it settle down to showing the Windows Logo. My graphic card is new (ATI 5770 Radeon Xfire.happened before i installed the new grahpic card. Also i get black screen for now and then in the middle of work for about a few seconds before it resume back to whatever I was at (or doing). So far it has not crashed nor freeze. I have 4G Kingston Ram but the System is showing 4G Ram and it also shows that only 2.9G is useable. Could the ram be the problem? 2 previous sticks were good showing to be 2G as working healthy and the new additional 2 G shows up as a total of 4G but 2.9 as useable.
View 2 Replies View RelatedIve done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
View 3 Replies View RelatedI downloaded and registered VMware Server so I could make my own virtual machines. I was planning to try Ubuntu and Solaris. VMware made my Ubuntu virtual machine so then I tried to install Ubuntu on it using the alternate CD (I didn't have the live disk on hand). The install went fine for a while, but eventually the screen started to blank, return, and blank again. Finally it blanked and wouldn't return. I saw the Ubuntu workspace switcher in the lower right-hand corner and the Ubuntu logo in the upper left-hand corner, but everything else was black. I tried to do a ctrl+alt to jump back to Windows, but the VM screen shrank and parts of the windows I had open in Windows showed up, but the screen was mostly white.
View 1 Replies View Related