Did complete hard drive erase and reformat suposedly this brought back to fresh from the factory specs?This is Insane. So, I'm searching for the answer to what's up with all these 'hidden files taking up all my memory!!!"What I found was/is horrendous - scarey. http://membrane.com/security/secure/Microsoft_Is_Unscrupulous.html <---WHOA check this out
Two year old laptop. The internal drive has been making a dreadful noise and thats why I bought a new computer. My plan was to replace the drive so I'll have a good backup machine. How much can a 40gb drive cost from the vendor $400.
i put fat32 on partition 1 and NTFS on partition 2 on the same hard drive can that be why my system isnt running good because i just installed windows xp on a formatted hard drive and it runs poorly. or can anybody tell me the best way to partition a 40 gig harddrive to get the most out of it....? I thought there was something wrong with my windows xp disk because out of all the times i have fdisk and reinstalled windows it never ran this bad...
What is the file "pagefile.sys" in the C: drive (Yes I do have show hidden files and all that on)But here is why i'm wondering what this file is.Mine says it is 3.99GB and my friend checked hers and hers said 768MB
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
No matter what I do, when I change the properties of a single directory to either show or not show hidden files and folders, that property then changes in every single directory on the whole drive. I do not click on "Apply to All Folders", I just go to the directory of interest and change the button in Folder Options>View and press "OK". Is there a trick here? Basically I want some folders to show hidden folders, and others to not show them. Right now it's either all or nothing! Again, I am NOT pressing apply to all, which I know will apply all view settings to every folder.
i had to reformat my computer and when i was reinstalling my programs suddenly my hidden files where not hidden anymore if i clicked properties it said hidden but they just appear translucent.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
Now however, my hard drive seems to contain approx 13GB of data which I am unable to locate, even when viewing the "hidden files" option. I first noticed this increased used space when I wanted to defragment the hard drive and noticed that there was only 45% free space available (there is usually 75%).I have viewed the properties of all the folders on the C: drive and they do not add up to the 20GB shown on the C: drive properties...The defragment report states that "some files in the volume could not be defragmented"
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
I was just wondering if it is a good idea to clean out the :WINDOWSTempC:Documents And Settings(Username)Local SettingsTemp foldersperiodically.I know i have to uncheck the show hidden files and folders, Do i select all in each folder afterwards and delete everything?
Just got a new machine and the primary drive is an SATA drive... but I still want to get old files of my old hard drives by hooking them up the the ide connections. Unfortunately, for one drive when I put it in the machine it gives me a missing hal.dll error and when I put the other drive in it gives me a ntrdl missing error. is there any way I can force the machine to boot to my SATA drive when the IDE drive is in there? I suspect it is trying to boot to the old drives when I install them.
I have a computer that I need to take all of my existing files off of so that I can erase the HDD. I also have a 150gb external USB HDD. What is the fastest way to transfer all of my files on to my external HDD, and make them so that they are viewable by my other computers. I am running all Dell computers with Windows XP Professional on them.
I noticed lately that the files that are in the attached picture that have the numbers and then _backup just recently showed up on my c: drive and my d: drive. Now they have attached themselves on all my external western digital passport drives drives too.
I cant delete them, they say they are locked. I have also downloaded unlocker 1.8.7 and it wasn't able to delete the files either. I have run system mechanics, prevx malware, kaspersky nitvirus program and didn't find anything wrong. The haven't caused any problems that I know of except I wasn't able to format my d: drive.
A friend of mine's hard drive was damaged so I replaced it and installed Windows XP on the new Hard drive. This was fine and no problem. In an effort to salvage some of his files from damaged hard drive I connected it as slave and windows recognised it with out a problem. Now the tricky bit! I was able to access "My Documents" on the old HD but when I tried to open his folder(for his profile) I got an "Access denied" message. He then told me that he had a password on his previous windows profile. Since Windows is not booting from this HD and I don't have an option to enter a password, is there a way to access this folder?
i`ve just begun using a new computer,running windows xp, i intend to install a 2nd hard drive,from my old computer which was running windows 95.Can i still install even though the 2nd drive is so old....and if so, is it possible to keep all my files from the old drive and transfer them to the new.(all my programs are still on the old computer,i just can`t be bothered reinstalling all the programs and files.
Please help. I have a old hard drive that was crashed. However, I need some important files from it. I tried to boot up it as a second hard drive with my XP computer that is NTFS, but I can't see files from that hard drive. I couldn't convert it to NTFS because it is a 500MB hard drive. Please teach me how to get files from it.
In my my new computer i only saved the hdd and the rest of the old computer was sent to my brother and now when i try to install the old hard disk with everything else new computer is not booting. I bought a new and bigger sata hard drive and installed a fresh windows xp and not able to retrieve my old files with message access is denied.
I am on the computer in one room, networking with a computer in another room.I know you can export registry files onto your hard drive. Do you then have the other computer's regedit import that file?
I would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
I have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive. I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
for some reason xp will not load on start up. I'm planning on reformatting the hard drive but i would like to get the files that i need out of there before reformating. How do you get files from a hard drive without windows being activated?
I have 2 disk partions on my computer my c: has around 10 gb and my d has the rest of my memory.I was has installed vista and my computers could handle it but I didn't install sp1 and it crashed.I had xp on the other partion.So i booted from the xp disk now i want to delete everything on the d: Drive but it has vista files which are protected.Is there any way i can clear it?
I only have 12% free space on my D hard drive and when I try to go into the drive to delete some files/programs, I get a lock icon and I get a message that I can't delete. It's a back-up for the computer and it is locked. How can I go into the drive to delete some items. I know I don't need all those files/programs backed up. I have a HP Media computer and I have XP.
I am really annoyed cause I can't delete most of the files on my external hard drive, nor can I format it. I tried using this program that has always successfully deleted files off of my C and F drives. It seems there is no way to delete these files.
I just reinstalled windows xp on a computer which was having problems with win xp installation. I do not remember how I reinstalled it but I somehow forgot to save a few data files. I would like to have kept. Does anyone know of any utilities including freeware and non freeware to try to scan the hard disk and recover the files in case they still exist and the problem is that they are just not indexed by the file system?
I am running windows xp sp2. My primary computer seems to have had a motherboard meltdown. Left on thursday, would not boot on friday. Cannot get to cmos, or anything. I removed the harddrive and put it in another computer to get work files off of the drive and transfer them to server. On boot it says"error loading operting system".I hooked up the hard drive as a slave and used explorer to go through and get the files. I can see the Desktop directory in documents and settings****desktop, but i get an access denied when i try to get to the files on desktop. I have tried using the Dos Command prompt and have the same result. I have booted in safe mode w/ prompt, same results. I have tried making a user profile with same name and passwords, no luck. These are files on the desktop, not shortcuts. Does anyone know how i can copy these files?
I bought a DELL labtop Inspiron 5052 over two years ago. It got XP Home version. A couple of weeks ago, a cup of coffee was spilled on my laptop. I took it to a computer shop. They contacted Dell and tried to order the labtop motherboard but to no avail as Dell has discontinued manufacturing this type. The warranty is only 1 year. So I decided to use it for spare parts. What 's an expensive cup of coffee ($3500.00). After removing the hard drive (60Gb) from the labtop, I made it as an external USB type hard drive. It was a perfect solution as at least I can save the data. But the fun was a short one as I now experience something to do with 'file access'. Connecting the external hard drive to my PC, I can see all the files and folders on it. The problem is on my Dell laptop I have 2 users setup under Document and Setting. One of the user logon (userA) enforces password while the the other (userB) enfoces no password for logging on. I can open files from userB with no problem but can not open files or folders from userA. It says "Access denied" or "file inaccessible". Is there a way to overcome this ?
I am using Windows XP and have two hard drives. Until recently I had Windows installed on one hard drive and all my important files (photos, business files, videos, etc) were also on this drive. My other hard drive was completely empty. Suddenly I started encountering problems with Windows and while I was using Windows it would completely freeze. I would pull the plug on the computer and start it again and then it would be fine - for a few hours - and then it would freeze again. The problem started happening more often and more quickly after rebooting and interestingly I noticed over the course of a few days that the problem seemed to be worse whenever my heater was turned on. I left the heater turned off and didn't encounter a problem again for a couple of days, but then it started happening again and more often even while the heater was turned off. I figured because there seemed to be a correlation with the heater being on and the computer's performance that the fans or the power supply inside the computer were over-clogged with dust. I opened up the computer and thoroughly cleaned out all the dust I was able to and made sure all the fans were dust-free. It didn't help. The computer's condition continued to deteriorate and occasionally when I attempted to re-boot the computer it would completely freeze before getting to the Windows boot screen or it would display the following message.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. Over the next couple of days the computer wouldn't get to the Windows loading screen at all and it would only boot to the point of displaying the aforementioned message.I took my computer to my friend's house to see if he could fix it. He said that some of the boot.ini files in my version of Windows were damaged or I had accidentally deleted them somehow. Because I was completely unable to load Windows there was no way to do a System Restore so he came up with an alternative plan. He decided to load a new Windows XP onto my other hard drive and use that drive as my master. He said even though Windows was loaded onto the first drive, I would be able to access the files from it with the new Windows in Windows Explorer. So he did it but then we encountered a new problem. The new Windows works fine but for some reason I am unable to access the files from the other hard drive. I think this is because my original Windows had a password on it. When I used to load Windows you had to type a password to login as me and access my files. Otherwise you could only be a guest. But now when I try to access these files an Error message comes up saying these files cannot be accessed. It doesn't even give me the option to type a password.So basically what I want to know is this: Am I able to recover these files from my original hard drive. I really need them for my business and I have five years of family photos on there that are of high sentimental value to me.