Dual Booting And Vista - Install First?
Aug 8, 2008
My question is which should I install first and why?
Also is it possible to have an option as far as which OS drive I wish to select every time I want to boot into an OS?
My question is which should I install first and why?
Also is it possible to have an option as far as which OS drive I wish to select every time I want to boot into an OS?
I have a harddrive with Windows XP installed on, and for some odd reason decided to put in another harddrive and install vista on it. After coming to my senses and realising I didn't want vista, I took out the harddrive. But now whenever I boot, it still asks me which operating system to boot into.
View 2 Replies View Relatedi just had some problems...obviously... anyhoo, i tried to make another partition to install Windows XP on, but after installing, i don't get the option to boot into vista...which is quite worrying...i also have some "ubuntu remains" but cannot boot into the Linux OS because i deleted the files thinking that that would get rid of it. but then i have to repair my vista installation using the cd from a friends computer. (Windows Startup Repair after booting from CD)
View 6 Replies View Relatedwhen I had a second HD for storage and format it in Vista, everything is fine, I can move files in and out of it, no problem.Then I shut down and boot up into XP. When I go to access the drive its says its unreadable.Then I shut down and go back into Vista, it now says its unreadable. So I have to do a full reformat for it to work again
View 2 Replies View RelatedI partitioned the blank hard drive on my desktop computer into C:/ and left about half of it unpartitioned to install XP on later. I installed Vista on C:/, and a while later installed XP. Once XP installed, I couldn't dual-boot back into Vista, so I tried microsoft's commandline hack
http://support.microsoft.com/kb/919529
and after that Vista ran fine but XP will no longer load (When I select the "Older Version of Windows" from the boot menu it returns an error immediately saying that a vital file can't be found). I think the problem may have something to do with how Vista thinks the drive that XP is on is F:/ and Vista is on C:/, but XP thinks the drive it is on is E:/ and Vista is still on C:/
Currenlty got an issue where i have a user who wants to dual boot with Vista and XP using sata disks.The general rule of thumb when doing dualbooting is to install the oldest operating system first, and then gradually work your way up.The way it will be setup is as so Vista - Primary partition of the 1st disk
XP - Primary partition of the 2nd disk.Now, The way i was thinking of doing it was to install XP first, then install Vista, And modify the boot.ini to find the entry for XP.Is there any difference in modification of the boot.ini file when using sata drives, and is there any difference when making mods in Vista (As i have only edited the boot.ini in XP)
I have windows vista installed on a raid array, and when i try to install windows XP it asks for the 3rd party driver which i have on a floppy. I then can get through the next couple of screens, however after it creates the windows directory on the partition I have set it asks me for another set of drivers to be put into the floppy disk, this is where the problem start, any ideas what drivers its asking for? The only drivers I can find are the intel mass storage drivers but these are larger than the floppy disk...
View 11 Replies View RelatedI really didnt want to harm my computer or have all my files deleted so after spending hours googling it, I thought I'd make my own thread and ask here.My cousin basically gave me my laptop, 40gb hard drive and dual booting windows xp and windows vista.I've never ever used xp and always use vista, but recently I noticed that I'm running out of diskspace. After a lot of research I realised it was my windows folder that was taking up 50% of my drive!
View 3 Replies View RelatedI'm going to start off with my whole process on how I did this. I am performing this in a Compaq SR5310F Desktop computer that originally came with Vista Home Premium:Within Vista, I opened the Disk Management utility. I then shrunk the volume and left myself with exactly 40GB of unallocated space for my XP installation. I then booted from my XP Pro cd, selected that unallocated space, formatted it using NTFS, then installed XP. It copied all the files fine, but when it reboots to launch the GUI of the installation, I get a message saying, "Error loading operating system"
View 7 Replies View RelatedSo I'm using my a8n-sli premium motherboard and have been just using 1 sata hard drive using Windows XP for about a year. I bought a second sata hard drive last week and installed Vista on it.I just can't figure out the correct boot.ini for this to work,I get an missing NTLD message, when I try to boot from Vista, but the XP one works with that configuration.I can boot off the Vista one fine if I set it in the bios boot order to come up before the XP hard drive, so the drive and the OS are fine
View 3 Replies View RelatedDual boot win2000 as C:, installed fresh XP pro as 2nd OS in F: and can't boot back to C: now....??I checked the boot.ini and it's exactly right so I assume I need to re-fresh some files in the C: win2000.What's the best way to get the win2000 up and running again in C: ??
View 8 Replies View RelatedI'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista
Or perhaps such an old XP cannot recognize a boot hard disk that is not C:?
Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation?
Thank you,
Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
View 1 Replies View RelatedCan i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies View RelatedIs it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
View 7 Replies View Relatedjust ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
View 2 Replies View RelatedI initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies View Relateddoes ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
View 1 Replies View RelatedI have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies View RelatedI'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
View 5 Replies View RelatedI have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies View RelatedI am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies View RelatedI'm having problems dual booting XP with Vista. My first problem is that I can't see the space I create from when I shrink the volume on the XP install screen. I have 2 HDs, both over the 137 GB limit (or whatever it is) so I assume it may be related to that. Also the main HD has a separate partition for Vista.
I don't really use the one HD so I was going to just install XP on that and be done with it. Well when I went to do that, it said that it couldn't recognize the formatting on the C drive or it may be damaged and would need to reformat it to continue. I canceled out of it and then my pc wouldn't boot. I had to put the Vista cd in to repair it
I'm thinking about unplugging the C drive and then trying again. Or would that cause problems when I plugged it back in?
I loaded a second disk drive with Vista Beta 2 and have XP on another drive.Problem is I don't see Vista as an option to boot from? What is the name of the file(s) I have to edit to get this to work?
View 1 Replies View RelatedI have a piece of hardware I use for cutting (scrapbooking thing) and I spent a BUNDLE of money for it ($400) a few years ago. Problem is, Xyron (company) stopped making updates for it past Vista 32. Now here I am with a Dell Inspiron 1545 loaded with Windows 7 and have no way to run the cutter unless I pay Xyron $100 for the new software.Back in 2002, I had a Dell desktop (no longer in use) and I still have the installation CDs for XP from that system. Is it possible with this 1545 to put BOTH Windows 7 and XP on it??? ANDDD....can I use the CDs from the Dell desktop for the installation?
View 14 Replies View RelatedI had vista and xp in dual boot and decided i was going to delete the vista partition, well apon restarting my comp,i get a real quick Invalid boot something or other, cant read all of it before it disapers, and then nothing, it wont boot into xp.i have done a fixboot and i did a bootcfg/rebuild and still nothing
View 14 Replies View RelatedI wish to set up a dual boot arrangement using :existing 300GB HDD and new 1000GB HDD
existing Win XP pro and new Win Vista existing Wireless Broadband and new ADSL2+ without physically changing plugs on the internet and allowing access to the alternate HDD from each selected boot. Also is there an online training facility where I can learn more about programming system modules and changing startup files and defaults. I did do a Microsoft course years ago on NT4 but my notes and memory have gone astray
I had partitioned my HD to run XP (pro sp3) and Vista. Not liking vista, I deleted it and merged the two partitions into one, XP. Now when I boot I still get the option to boot to vista or an earlier OS. There is only one OS so I thought that would just be gone. Its not. How do I get rid of that screen at start so it just boots into xp, I'm being careful because I tried to reverse them when I partitioned it and ended up with a real jumbo
View 2 Replies View Relatedim not sure if the way round iv done things was stupid or not, I have my machine, with XPPro installed on, bought another H/D and installed vista 64 on it, however i installed vista with the xo drive unplugged, and i cant work out how to get an OS choice on boot
View 6 Replies View RelatedProblem: I am unable to connect to the internet.I have a new build dual boot system with Vista x64 SP 1 Home Premium on C: drive Seagate 120G 7200, XP Home Edition SP 2 on E: drive Seagate 160G 7200. A third Seagate 500G is for games, etc. Vista was installed first and the internet connection works. XP works well except I cannot make an internet connection. I have a Linksys WRB54G router which takes its internet connection from my cable company's modem. I have 4 ethernet connection points: 1 goes to a desktop, another goes to a notebook, the third goes to the computer in question and the fourth is unused. This router also has wireless capability. My build chassis is a Thermaltake "Kandalf" LCS, 1000W CoolerMaster, XFX 790i Ultra MB, Core2 Duo E8500 at 3.16 GHz, 4gig Corsair DDR3 in two 2gig sticks, two XFX 9800GX2 in quad SLI, a cd/dvd drive, and a floppy, kb, and mouse. Motherboard has two ethernet ports, one in use (Vista).I am not familiar enough with networking to know how to proceed. The Connection Wizard is no help, 'specially since I don't know what I am doing.
View 4 Replies View Related