I wanted to install Windows XP on an old computer. Its CD drive was broken, so I installed XP from its hard drive instead. When everything was finished, I ended up with two drives, D and E. Unfortunately, I was tempted to change the letters (OCD, much?) to C and D, and did so (via regedit).Now, my computer won't boot up; the welcome screen shows up, but it freezes there.
View 10 Replies
I created a new partition and installed Windows on it a while back, but when I booted up, it had the letter G and my other partition that I used to store music was drive C.I was going to change drive letters around so that my OS was on drive C, but I was wandering if this would mess up any applications I have on the system?
View 4 Replies View Relatedi feel that this is probley simple... but I don't know how to do it. I've right clicked directly on the dvd-player to see if I could change it and nothing is there. My dad has a dvd-player F: and a cd-rom drive E:, His computer was formatted recently, but now the software for each of the drives are mixed up. Putting a dvd in drive F:, tells us that drive E: does not contain a disk.I would like to just change the drive letters back to how it wants to be set-up.
View 1 Replies View RelatedI recently attached a new dvd rom to my pc. After it was detached, the drive letters on my extra HDD's have changed around.Can anyone please explain to me how to change the drive letters back?
View 6 Replies View RelatedI got a usb flash drive and plugged it in for the first time today. My computer automatically named it (F and (G - it had two partitions apparently. Anyway, I also have a Buffalo external hard drive that was always (F before. I figured my computer just assigned the usb flash drive (F and (G temporarily because the external hard drive wasn't turned on. So when I did plug it in, it was named (H. However, when I disconnected both drives, and re-plugged the external hd, it was still (H. Also, I noticed that all my folder settings in the external hd were reset.
I tried uninstalling the driver for the usb flash drive and the external hd remained (H.
Is there anyway to reverse this without reformatting or otherwise damaging my files inside the external hard drive
So I just ran into a problem with my External Western Digital Hard Drive. Previously, my drive was mapped as the E Drive (I believe) and after taking it down and setting it up again (when i moved back to college), my external hard drive switched drive names on me. This really sucks, as my external drive stores all of my iTunes music and now when i run iTunes, it tries to find the music from the E Drive location and not the G Drive location. Is there an easy way I can change the letter drives so that I don't have to reimport all of my music?
View 1 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View RelatedCorrect me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies View RelatedHardware:
IDE drive; SATA drive; misc USB drives and card readers p4 (2G) Foxcon board (w/ SATA support); 2G Ram...
Software:
XP Pro SP2; Partition Magic 8; (& misc apps)
I bit the bullet and reformatted my hard drive after problems with a corrupted W98 partition. (My testimonial to XP is that w/ W98 I did this sometimes twice a year or more; I've run XP without having to re-format for over two years.)
I have no idea why but I have an issue where my brother's computer after a clean install of XP from 98 exchanged ID letters. Drive "C" is now "F" and the Zip drive is now "C". It may have been something to do with SP2 which I removed. Windows won't allow me to change the hard drive back to "C" even after I made it available by designating the Zip as "H". Trying in Safe mode did not allow the change, nor did Partition Magic change it. "C" was added to the name but I could not change it from "F". I already started over and reinstalled XP but it still came up "F" as the hard drive. Things work after the second install where the drives quit after the first half-way into re-loading programs. Now it is just a pathway issue. What else can I do short of starting all over? Is there a way to change the hard drive designation? Any help would be appreciated
View 4 Replies View RelatedI just bought a WD 1 TB to replace 120 GB slave (it was 'c:') I had. I intended to still use it as a slave and keep my 320 GB (it was 'd:') as the master. They're both SATA's so of course that doesn't matter so I just kept the 320 set as the primary in BIOS.At first boot up the computer started fine but when it started Windows the previous devices hadn't been loaded and I was asked to register again before starting. I re-registered and clearly all the previous settings are gone
View 2 Replies View RelatedCan you reassign a drive letters to a second hard drive, cd/dvd drive? I seem to remember something about that in XP but can not recall what it was I read.
View 7 Replies View RelatedAt work we have so many network drives and in a recent upgrade to xp, the drive letters are showing up at the very end of the drive description. In certain applications, you only get to see a short portion of the beginning of the drive info and with the complex naming schemes we have, it is difficult to remember what's what and hard to tell the difference with just the beginning showing. It's very easy to remember what we've designated as K or N or P for example. Any way to switch these letters back to the beginning?
View 5 Replies View RelatedI'm trying to play Diablo II: LoD, which requires that the LoD expansion CD be in my CDROM drive. I mounted an image of the disc with Daemon such that it's in (virtual) Drive E: (normal CDROM drive is D:[b][/b]). But the game seems to only be checking my D: Drive for the disc, and it won't let me point to the E: Drive.
Is there a way to just switch the drive letters around, and if so, do you think this would even solve my problem? Perhaps there's a way I can just set E: as my default CDROM drive, so that the game would check there?
I recently had to reinstall windows XP to get rid of spyware. When I restarted windows, I noticed that my drive letters were not right. For instance,my hard drive is letter (H) instead of C. My floppy drive is correct (A). How do I change the letter back to C for my hard drive?
View 6 Replies View RelatedAfter a reconfiguration of boot loader in suse Linux two of my drives swapped their drive letters in WINDOWS XP SP2 (weird) now i can not reassign the drive letters as the disk management utility in control panel fails to start and gives error " service execution failed".so can u suggest any third party windows based software for achieving the task i have searched the internet and found nothing
View 4 Replies View RelatedMy main pair of raid drives crashed and burned. So I installed XP on my second pair of raided disks and recovered the data from the first pair. But now my boot/o-s disk is D and my drive is C.Any tools I can use to change drive letters around and move boot information and such automatically?
View 9 Replies View RelatedMy CD rom is showing up as Drive D: and my second drive partition is showing up as Drive E:. I want to switch them so the CD rom is always the last drive letter.
View 8 Replies View RelatedI have 2 USB hard drives which i use for storage. I have a backup program which automatically backs up my mp3s and digital camera pictures.When i plug in the USB hard drives they show up as C (80Gb HD) and D problem is that if my digital camera is plugged into my USB port before any of the USB hard drives are plugged in, the digital camera then takes up Drive Letter 'C'. Then if i plug my USB Hard Drives in they now become D and E. See my problem ?? The backup program no longer recognises that the USB hard drives have moved up a letter and so won't back up until i restart with only the USB hard drives in tomake them C and D again. So my question is, how do i force WinXP to make sure that my 80Gb HD is the only thing to ever be allocated 'C', and my 160Gb HD is the only thing to ever be allocated the letter 'D' ?. i.e. I want to make WinXP automatically recognize which HD i am plugging in and always allocate it the Drive Letteri want?
View 8 Replies View RelatedI've got the following drive letter configuration on my PC . C to G, local drives H to K, network drives (essentially data on a server)I've now got a PDA that connects to my PC via USB. However, when connected it seems to go for the next consecutive local drive letter (ie H) - even though H is already allocated to a network drive.Is there a way I can allocate a permanent drive letter to the PDA (eg L)even though the PDA isn't always connected and may be connected/disconnected whilst the PC is running.
View 1 Replies View RelatedI'm running xp, and my c drive has now become c,f and g.when checking in disk management, there are no volume labels assigned. In Disk 0, it shows the three partitions (I've no clue why there are 3, is that standard?)39 MB FAT, 69.81 GB NTFS, and 4.64 GB FAT32.This happened after a failed software install that dell refused to help with (there's a shocker)It's just an annoyance, nothing more, but I would like to get it back to being just the c drive without risking losing anything in the process. Something I can do safely or just live with it?
View 6 Replies View RelatedI have a second hard drive and recently my system began to assign it an extra drive letter. That is, when I go to My Computer I see it twice with different letters. This began after I installed a DVD burner and had not happened before that time. The burner and hard drive share the Secondary IDE Channel, with the burner as master. I tried CS, with the same results. Due to the configuration inside I cannot put the hard drive on the Primary IDE Channel with the main hard drive. I can still access the drive and use it normally, but I would like to get rid of the second occurrence. I even tried reformatting it, giving it a different volume name, unplugging it and booting the system, then plugging it back up and booting again. Now I have 2 drives with the new volume name. Can anyone tell me why this happened and what I can do about it?
View 13 Replies View RelatedI have an external hard drive that I use quite often. Recently after I restarted my computer, all the partitions on my main hard drive were assigned a drive letter and my external's drive letter was bumped from F: to J: So now F: is set to the 47MB partition built-in to Dells and I can't change its letter assignment because in Disk Management it doesn't give me that option! I can change my external's drive letter easily I just need F: to be available again.
View 7 Replies View RelatedA friend has a 200G hard drive partitioned into two sections, no OS on it. The drive doesn't show up in disk management but does in System/hardware. Can't get anything off of it, XP won't read it. Does anyone have any ideas please? He's got 12 mb free on one partition and 7 mb free on the other but the drive just doesn't show up in XP. Thanks in advance for any help on this one. I have the same set up so I'm kinda worried and would like to know any ideas just in case for future reference
View 6 Replies View RelatedI recently did a format/reinstall of XP and I've found that my drive letter's have changed. It is set up in the following way:What I want to do is make the HD (personal) D:, the way it was before the format. Now I've gone to START->PROGRAMS->ADMIN TOOLS->CPU MANAGEMENT->Disk Management but I can only change the letters of my harddisks and the external drive there, and D isn't an option for the second HD (second partition, technically); presumable because the DVD-RW is using that letter.
View 10 Replies View Relatedmy keyboard is messed up. if i type the alphabet it comes out as follows
abcdefgh51230n6pqrst4vwxyz, i can type the correct letters by holding down the 'fn' key, as i am doing now. and if i hold down the 'fn' and 'shift' i get this
ABCDEFGHIJKLMNOPRSTUVWXYZ this all aooctter when i was trying to write a letter to someone in germany and wanted to tyoe the char of the 'umlaut'. i thought i could set the language to german, then switch back.
I have this Dell L733r that I installed WinXP on. It also has an internal 250mb zip drive as a slave drive which is on the same cable as the DVD rom installed on [1]. When I installed WinXP, the main hard drive (master) [0] ended up with a drive letter of [e]. The DVD rom was D and the zip drive was [c]. Is there anyway to avoid this short of disconnecting the zip drive? But it would seem that you wouldn't have to discconnect the zip drive.
View 5 Replies View RelatedI have just installed windows XP on the PC i am writing from and because i foolishly had a camera card reader plugged in and a seperate USB hard drive connected the installation has jumbled up the drive letter allocations.For example what would traditionally be the C drive has the letter F.
View 10 Replies View RelatedFor some reason, my boot drive is showing up as D while my secondary drive is showing up as C. This is messing up my program files and various other stuff. I can't change any profile settings and can't install anything. How do you change the letters in XP?
View 7 Replies View RelatedCould some one tell me if it is safe and how to delete these drives. Q thru Z
View 4 Replies View RelatedI have windows xp on an emachine t2642 and I have installed new service pack2, computer running fine up to this point(only 6 months old). I installed an iomagic dvd burner yesterday and what a mess. xp would not assign a drive letter to this burner. I have an external hard drive taking up drive letter e d drive is my cd burner. there is a mysterious drive letter "f" I spent about 6 hours trying to discover what drive letter "f" is to no avail. I might add, bios recognized all and I could see all in device manager. it was in "my computer" that I could not get access or see second burner or second hard drive. if this sounds familiar or if you have any questions for me, feel free to do so and thanks in advance for any help with this matter. I might ad at this time, I have unhooked my old cd burner and have made dvd burner master and reconnected my external hard drive.
View 10 Replies View Related
