I have bought a laptop now, and re installed the os, because the old one had some stuff that appeared out of nowhere and ate your ram, so i fixed it up the way i liked it and went out to get some drivers.i got on the internet, and downloaded and installed 10.2 with an error that said it could crash my system, it crashed, so i deleted it. So i went on the internet, and found 6.14 off of gateway support, it works, but its too outdated to play my games, so i went on the net again and downloaded 9.8, fine install, no errors, but it crashed again, same with 8.2 and 7.5.How do i fix this driver crashing?
I do not show the Security Center Icon in the Control Panel. I can go to the Security Center by going to All Programs, Accessories, System Tool, route. How can I add Security Center to Control Panel?
pretty much fed up with vista generally not working with crossfire and stuff especially with the altest catalyst release it was always a problem even when i was using single card though.. not to mention the other issues.Is XP 64bit any good? Are there a lot of issues?
Last known stable drivers for ATI are Catalyst 5.2. which I use right now. I installed Catalyst 5.4 and I get blue screen with STOP message at the far end of installation procedure. I uninstalled previous drivers of course. Then I tryed again end same thing happens. After that I can see that all graphics are normal in games, exepct there is no sound at all, computer is REALY slow working in win xp and there are no optical drives in my computer menu-dissappered?!? After that I uninstalled 5.4 and installed 5.2 back again. Same thing but worse happened with 5.3 version. I updated BIOS, apertur size is default 64Mb (my graphic card is 9600xt 128Mb), fast writes are off, as same as caching and shadowing are off too. I've got Audigy LS and S-ATA 160Gb.
the colors in my Security Center have changed. First I thought it was a problen with the windowblinds skin I was using but I don't think it is. Could it be the WB program itself? I didn't have this problem (fresh OS install) until after I installed a few things, WB, avast, zonealarm, and uninstalled antivis.
While building up a new computer I go into Security Center to make some configuration changes. The resource "Change the way Security Center alerts me" is available at this time. Some time later during the building process I go back into Security Center and find that resource is no longer available. It is greyed out.
Wondering which versions of XP can Access which other versions of XP.Specifically, can media center edition access media center edition , or do one or both OS's have to be XP PRO. My understanding is that XP Home cannot access or be accessed via Remote Access.
I want a single desktop click to enable/disable windows XP taskbar auto hide.I can do this if I write a script for the AutoHotkey macro tool to open the relevant dialog box and then check or uncheck the appropriate check box.I'd like to open the dialog box with a command line from AutoHotkey, or a similar operation. Right-clicking the taskbar even in the program is uncool.The catch is, I can execute any CP dialog EXCEPT this one as a command line, either passing a dialog parameter to Control.exe or else using a *.cpl file name with Control.exe or directly. But I can't find "Taskbar and Start Menu".
So i was trying to make some room on y C drive and i guess i deleted some files that i shouldn't To make a long story short now my volume control thingy that stays on my taskbar has dissapeared.When i go to the control panel and to sounds and audio devices and i get in there and there is an icon with the option to place volume icon on the taskbar but when i click on that i get 'windows cannot display the volume control on the task bar because the volume control program has not been installed. After several tries i figured i deleted the windows file soundvol32.exe but how the hell do i get it back and put it in its right place?I have no idea where it would go? Anybody have an idea how i can install that back? I tried using my windows cd but since i put service pack 2 on it it said that the version of windows i had on the cd was older than my current version.
I have started to get the following message coming up when my machine is booting up: Control Service. The requested control is not valid for this service.Has anybody else experienced this? I am using a Notepad with WXP Pro SP2.
My cpu kept crashing at random times so i decided to reformat , during re-formatting my cpu crashed now when i turn my cpu on it says and everything loads just before i can go on desktop it says winodws restarting and restarts my cpu ! and when i try and reformat it begins to reformat then minutes later says Error:missing files.
Only since I installed the game messenger has my computer been crashing. Tonight was the second time. It says my VTdisp display driver has stopped working correctly. Something like that. Then my desktop icons are huge and the color of everything is all messed up and I then have to reboot.Any advice, my computer runs XP is only a year old and ran perfectly until this happen. I forgot to create a restore point before installing the game. I am scared about what could happen to my computer.
It is ironic that I am here, because I own a tech business, but I have been stumped so long that I need to go ask the big-guns.My problem: My computer was acting up.My solution: Reinstall XP.My second problem: I have a SATA drive which XP doesn't support by default.My solution: Use nLite to package my drivers into my install disc and burn a new copy.My third problem: install goes as planned, but when the computer starts up it gets to the Windows Logo loading-screen and crashes right as the blue bar enters the screen. The computer simply freezes, shuts down, reboots, and says "Windows did not shut down properly" or whatever the hell it says.So now I have no clue what to do. I know it's not the wrong drivers--I got them directly from ASUS's website and made sure it's the 32-bit Windows XP drivers.
I have tried reinstalling Windows like 10 times over the past 3 days, so I know it wasn't just a faulty install.My CD drive is 6 months old and my hard drive 2 months old. They both run perfectly, so I know it's not them.Being the genius I am, I backed up my entire hard-drive on a BKF file with a clean install! So now I can just use the BKF file to write to my hard drive... if I had a working computer. So here's my situation: I'd accept a helpful fix for the thing above, but I don't think there will be any fixes for it that I haven't already tried. But what I really do want is some advice on how to write my BKF file to my SATA HDD. I have my SATA connected to my computer via an external USB converter-switch-like-thing, so I have access to it. The BKF is stored on my laptop's HDD, but my Laptop is Vista (ewwie). I need to know how to take the BKF file from my Vista laptop and restore it onto my SATA HDD that is attached via USB. Vista's restore capability doesn't support XP's BKF files, so I was wondering if anybody knows of a third-party application or any way to get this back up, and quickly. I'm a developer and my computer has been down for 3 days!
There was a power outage where I live today and since then my computer won't start up. I am running Windows XP Pro. When I turn it on, this is the message that I get:A problem has been detected and Windows has been shut down to prevent damage to your computer.PROCESS1_INITIALIZATION_FAILED If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.
Well I have a dell computer that crashed,and my intelligent brother thought it would be smart to use a emachine restore disc to fix it.Needless to say this did not help. Is there anyone out there that can give me any info on getting this computer back up.When I turn it on it comes up to a screen that has 7 options:,boot from hard drive,boot from ide cd rom,ide diagnostic,and a few other choices.However no mater what you click on it comes up and says "trouble loading operating systems.I must say I do not know much about this.I guess my question is.Can it be saved with out changeing hard drive. I have a disc from dell that is labeled "operating system"and another that is labeled.Drivers and hardware
I have exhausted all my normal possibilities and I could use some help. Anyway, I was installing XP on a wiped hard drive and the computer froze in the middle. No it will not start in XP.It just restarts.It will start in safe mode, but what should I do from there? I already ran repair, same thing happens.I tried to format and reinstall, same thing.
I need some real help here because I am baffled. I installed Panda Titanium antivirus 2005 on my bosses computer. When I went to restart it after the install it wouldn't restart it would get stuck at the blue welcome screen. Tried booting it into safe mode and it wouldn't even boot there. So finally I had to use the Windows XP disk and do a recovery. Well when I did that she lost all of her applications. I had to reload Office, Adobe, and it said that the Panda Antivirus was not installed correctly.So I tired to reinstall it and I get an error of Class not registered.I hoping not to have to do format and reinstall Windows Xp but I think there is some corruption in the computer.
Gaming, music/photo storage, internet surfing, music making, and video editing just to name a few. Basically, what im saying is my computer is my "lifeforce" . I generally would claim i am generally computer literate. But, I cant find a reason for this to happen. ANYWAY!I turned it on one day, having done nothing to presumably harm a computer, and it goes to the windows loading screen with the blue bar and stay there forever, seriously i timed it the other day, from 1-9 pm it was "loading".I scanned everything while running in "safe mode". no problems. I tried restoring it to an earlier date said it restored successfully, but still sat at loading screen forever.
I cannot remember word for word as it came and went off that fast.This is what happened. I did the restart as told and it did come back but then it happened a third time and upon the restart the computer will not come back on. Or let me explain further...the actual computer will turn on when I push the button, but no picture or desk top or anything will come on on the monitor. I tried another monitor to rule that out and still nothing. I also was told to try restarting in safe mode but still get nothing coming up loading on monitor just a black black monitor screen. I really need to get this back up if not for anything else but to save all my lost stuff before I have to get rid of it.
Last night my girlfriends daughter tried to install a game on her PC (one of these tycoon games) it froze half way through installing and then switched itself off. When trying to restart it, it asks whether to restart in Normal or Safe mode etc and then it gets as far as the Microsoft Windows XP screen and then restarts itself again.It gets to the same stage everytime and restarts. It won’t allow me to start in safe or normal mode.
A while back my computer crashed and I had to do a recovery. Now all of my pictures are gone and my wife is pissed. We did back-up some of the pictures, but were missing almost a year and halfs worth including my son's birthdays and first t-ball games. Is there any way to get them back?
I decided to run a defrag on my computer before going to bed one night. When i woke up the next day my computer continued to reboot itself. It would reach the windows logo screen and run that for a while then i would stall for a little bit and restart. I then would shut it off cause i didnt want to mess with it and it would continually boot itself up and start this process over again. I'm running Windows XP Pro with an Athlon XP processor. I have 2-120 gig hard drives on a RAID. I have tried to do a repair with the Windows XP disk but the disk doesn't recognize the version of Windows already on the drive like it would usually do.
I had a windows auto update shield icon appear I clicked it and downloaded the update. after it downloaded it said I needed to restart computer..click here. I did and my computer would not restart or start black screen would click down seconds and try again but it would not start. Im'SURE the update caused this, as I have not done any other thing to cause it.I had to use system recover and LOST everthing and now I can't get back online till Monday I need a internet tech to come out because I can't get back on.
Every time I try to run MSPaint in my XP home system, it get crashed with a msg saying "Paint has encountered a problem and needs to close." the error report it wants to send to microsoft is a large file, i dont know which one is the specific error code.
I'm on my friends computer right now due to the fact that mine has crashed since this morning. I come home from school to find that I am out fo windows and theres a message on my screen stating that my system32 file is corrupted. I have a cd that came with my computer and I can get into command prompt dos through it. Is there a way to fix this to just to redo the system32 file through dos instead of having me have to lose all of my work and reinstall windows.
My windows was not loading properly and so i used windows pro sp2 cd and repaired my current installation. Once that was done when i tried to update it didn't happened and so i went to microsoft.com and downloaded a fix patch and it worked. After that my ca internet security 2008 suite was not loading anymore with windows and so i just unistalled it and reinstalled it and windows started to crash. Now when it crash it gives me multiple of blue screen and nothing till i restart and same thing continues.
Last night my PC said it was installing'needed' updates, when it go t the point it was going to reboot, it hung up. After quite awhile I manually re-booted it, and now it only gets to the first two lines in the boot sequence and hangs again. F9 for express recovery and other options do nothing. BTW It doesn't recognize my floppy or CD ROM so booting from CD it not an option. I do have a full install CD of XP Pro though.
