Cannot Configure Incoming Connections
Apr 4, 2004
I was trying to make a new connection by using the "Create a New Connection". I click on "Setup and Advanced Connection" and then I click next. Then I click on incoming connection and then I click next. Once I click next my computer freeze my computer for five to ten minutes and then gives me this error message. "Incoming Connection depends on the routing and remote access service which was unable to start. For more information, check the system events log". I don't know what to do. Before I reinstall windows XP, I thought one of you genius might have a better idea than reinstall windows again. I have received so much help from this newsgroup so I thought I asked before I go reinstalling anything.
View 6 Replies
ADVERTISEMENT
Jan 6, 2005
I have been trying for a while to delete three broadband connections i seem to have made, but not enabled. They are located in the network connections dialog under the broadband heading. On top of this they keep asking me which server to connect to. When I try to delete them, it asks me if i want to send them to the recycle bin, I click yes, and then nothing happens, they don't go anywhere.
View 3 Replies
View Related
Feb 2, 2005
When i have incoming mail it used to advise me in my taskbar and also by a voice message that doesnt happen anymore and I dont recall changing anything
View 5 Replies
View Related
Jan 17, 2009
working on a friends computer and cannot get connected to outlook express incoming mail. On the internet in good fashion. My setting are exactly the same as my Computer (except name and password).I have reformatted the C drive to no avail. Have updated all programs from Microsoft.
View 10 Replies
View Related
Dec 28, 2007
I have a Windows Installer splash screen that pops up upon a reboot and which flickers thereafter. It doesn't install anything, and I can't kill it by canceling it while it appears. It blocks incoming emails, (they hang up at 50% downloading) although sometimes when I reboot the problem doesn't start again for an hour or so. It's sporadic, but it never goes completely away. I thought I had found the solution on this thread here: , but installing the downloads didn't solve the problem. I have no idea what Windows Installer is trying to install. To make things more interesting, Add/Remove Programs in the Control Panel only shows very recent software. And System Restore fails for anything more than about a week ago, when the problem first manifested itself. I've purchased and downloaded RegCure, Fix-it Utilities 8 Professional, and CounterSpy. Ive run AdAware, Spybot Search and Destroy, and Spyware Blaster. While my registry is clean, no malware found, and my computer is running faster, all these were of no help in getting rid of this popup.
When I reboot, which I often have to do out of the Windows Task Manager because the popup is flickering too fast to do it out of the Start Menu, I usually get an error message saying that ccApp can't be closed. It reboots anyway, and sometimes I get back into a reasonably manageable system, and sometimes I don't.It don't know if the problem is related to Norton 360, but the Icon in the systray blinks when the installer is really going ballistic. I would try to uninstall and reinstall Norton, but it's not listed in my Add/Remove Programs list anymore, along with most of my other programs.
View 14 Replies
View Related
Aug 10, 2005
how to configure vpn plz let me know abt this.
View 3 Replies
View Related
Apr 18, 2010
How to Configure Windows to Open .html documents in New Browser! Disabled Windows IE....html doc's now opens in Notepad.
View 2 Replies
View Related
Aug 20, 2005
First, my notebook has been working normally until yesterday afternoon. Windows XP Home Edition was installed by the manufacturer and was working properly. But yesterday, when I started up and logged on to my computer, and everytime since, Windows Installer automatically launches. It gives the message something like: "wait while Windows configures Windows XP." Then the installer asks me to to insert the Windows XP CD, which of course I don't have since Windows XP was factory installed on this notebook. I cancel the process and everything seems to work normally. Is there a way I can stop this from happening?
View 1 Replies
View Related
Sep 3, 2010
I have a very old Desktop computer which is now so old that it's only useful purpose is projects and goofing around. I just dumped both of the hard drives (Two IDE hard drives, both on the same bus) in the computer in order to reload a fresh version of Windows XP. The Setup seemed to go as planed, except that only one of the Hard drives is fully recognized (C:).. Everything is connected correctly, I can even see the other hard drive in the Device Manager. The Device Manager states that the device is working properly, however I can't access it, can't store anything to it, it doesn't even appear in the 'My Computer'.. The second drive is suppose to be the 'F:' drive, I know that this system will work because it worked before I dumped the hard drives.
View 9 Replies
View Related
Apr 23, 2007
We have a Windows 2003 server that contains files that need to be accessed by a collection of XP Pro clients. We initially set up mapped drives that connected these client computers to the server using a set of security credentials that matched user accounts on the server. These mapped drives "map" when the client logs into XP. Since the local login credentials on the client PCs don't match those on the server, we use "Connect using a different username" to use credentials residing in the Server userbase.
View 4 Replies
View Related
Nov 22, 2007
I am looking to configure in BIOS, so my computer starts back on, if there is a power failer.Please let me know where I have to configure in BIOS.
View 6 Replies
View Related
Jan 18, 2007
I have this one computer in my house that uses a Motorola wireless adapter to connect to an 802.11g network through a router. However, recently, the computer acted up. I reformatted it, and reinstalled the adapter software. However, i cannot access its control panel to configure any options. This i have no explanation for. I have no option to make windows use its own controls instead of the software's because i have no connection.
View 2 Replies
View Related
Jul 27, 2010
Just bought a new logitech headset and can't configure.
View 1 Replies
View Related
Mar 1, 2010
Kindly let me know the SMPT and POP3 values and rest of the values needed to fill.
View 10 Replies
View Related
Nov 25, 2006
Whenever I try to download a different type of browser (one with tabs) other than using the old IE6, it works fine for a few hours, but the next morning, the browser isn't able to connect & display any type of page. I've already gone through this routine using Tablane, Opera, Firefox, and Flashpeak Slimbrowser. Also, I have tried to update my version of Internet Explorer to IE7, but that never will connect, not even fo a few hours. I always end up having to go back to a restore point before I can use IE again. So.... I have looked around for answers/solutions to this issue, but I'm not even really sure what I looking for.
This forum is my only hope-
View 2 Replies
View Related
Feb 20, 2005
In windows Xp pro where do i find the menu to eid t which programs i want to run at start up?
View 1 Replies
View Related
Aug 20, 2005
when i go into control panel then firewall , the circle to turn firewall on or off are in shadows and it wont let me do anything and i want to turn firewall on . do i have to play witht the firewall settings first or is there a problem?
View 9 Replies
View Related
Jan 26, 2005
Windows XP, using explorer, if you look at a list of files, and hover over a filename, Eplorer will display a yellow tooltip with file type, date modified, size, etc. The information seems to be related to the file type : .EXE files show different information in the tooltip than .DLL files. How can this be configured ? How can I tell Windows which information to show for which type of file? I'm using two different PC's, and one just stopped showing the "Date modified" in the tooltip. I'm looking for a way to restore that.
View 1 Replies
View Related
Aug 23, 2005
My computer and router was setup by a friend once and Remote Desktop worked great! Now I've replaced the originla router with a new DLINK DI-624. I have no idea how to configure the router.
View 1 Replies
View Related
Mar 29, 2006
Without creating a separate user account, Is there a way to configure XP to ask for a password everytime before something gets installed? My 7 year old daughter is starting to use the computer more and more and I do not want her accidently installing anything from the web.
View 6 Replies
View Related
Jan 30, 2008
I had this set before, but since i messed with something under user logon, I cant get it back anymore.Like how do I set it when I boot up pc, theres the xp logon(with bar going back and forth) then I just want it go straight to screen so I dont have to be clicking my user account. Instead it stays at choose user account.
View 3 Replies
View Related
May 4, 2010
I am new to outlook. i have just installed outlook on my pc. i dnt know how to add email account or manage it. and what is the term outlook connector and what is use of it? can i add gmail and yahoo account also in outlook? can my differrent accounts work together in outlook?
View 3 Replies
View Related
Aug 3, 2005
I've had something happen to my Windows XP Pro network connection properties.No matter what I do the under the Internet Protocol (TCP/IP) properties it always defaults back to Obtain an IP address automatically. I'm trying to assign a static IP.I've been using this computer in a static IP mode for approximately 6 years. Monday all #$%^ breaks loose and I'm still trying to recover.The registry still holds the proper information, but for some reason everytime I view it from the properties tab it's back to auto.
View 4 Replies
View Related
Aug 15, 2007
I am getting the unmountable boot volume when trying to boot up my dell computer.It tell me to restart in safe mode it shows a blue screen that says there was an error when iogged off.It says to start in safe mode ,but that dont work i tried everything and it comes back to the blue screen that says to start in blue screen and also says Stop 0x000000ed along with some different codes.I wish I knew what these codes were maybe i'd know what is wrong.Also i cant run the windows disk cause my cd rom don't work it's broke.So i copied it from family's comp. onto floppy disk and i can't get it to run on myy computer it just wont go to the recovery,nor can i figure out how to get into bios.
View 2 Replies
View Related
Jun 21, 2005
Is there a way (short of editing the registry) to configure the desktop background so that an image occupies only a portion of the screen other than the center. I would liike to place a personal photo in, say, the right upper quadrant of the screen and leave the rest of the screen a simple solid color?
View 6 Replies
View Related
Jul 3, 2008
what my pop and other outgoing and income servers
View 6 Replies
View Related
Jul 21, 2005
Can someone let me know how to configure a Windows 2003 domain user as a local administrator on a XP Professional client. I have set the same user ID up for the user on the local PC with administrator rights and when I log into the PC locally this works fine. When I log into the PC as a domain user the user has user rights and not local Administrator.
View 14 Replies
View Related
Mar 16, 2006
I suppose the title of this post could be something like, "Why can't XP be more like Win98?"But seriously: I have in front of me a File View of My Computer. In Documents and Settings, it shows me that there are apparently four accounts: Administrator, All Users, Default User, and me In each one of these there is, in differing combinations, things like My Documents,My Music, Favorites.. And, in some there are what appear to be administrative privileges (Local Settings). The confusion this is causing while transferring documents and files from the old machine is getting up my nose! (This is a piecemeal exercise as the old PC is still working as the office - word processing, spreadsheets, etc.)
View 6 Replies
View Related
Jul 25, 2002
Is there a way to configure disk clean-up to not consider compressing old files as one of the alternatives? I don't consider file compression to be a useable feature and would like to eliminate it. It also adds greatly to the time it takes disk clean-up to run. What should be a relatively short task turns lengthy with this option enabled.
View 6 Replies
View Related
Jul 7, 2008
The service 'Network Connections' uses up 80% of my CPU whenever I leave it enabled. I have singled it out, and yes, this is the cause. Toggling it off in my msconfig leaves me with an idle PC (0% usage). However, I cannot get internet without 'Network Connections.'
View 1 Replies
View Related
Aug 14, 2005
My son and I share an "Always On" Cable Internet connection through a 4-port hub and cable Network. I want the two computers to connect "locally" and share Files, printers and a scanner (without scarificing the internet sharing).My efforts on creating this connection were, so far, fruitless.Can someone point me in the right direction? As I am not technically inclined, "how-to" sites would be of great assistance.
View 11 Replies
View Related
