Windows Dimming With No Regards To Activity / Inactivity
Oct 9, 2013
So here, as I try and contain my irritation as the window continues to constantly dim as I type this requiring me to click it so that I can type.
As mentioned above, the problem is really simple. Windows, of all kinds, my file explorer window, my Google Chrome window, any window that I bring up, is prone to dim- at the top, as if it were made inactive by clicking something else. Not the screen. Only the windows. And only the window you're working on.
I personally use Windows 8, I installed to the latest chrome. I don't use internet explorer, I've removed extensions, I did a system restore. Yes I noticed a lack of the problem initially, I did install programs, the same programs that I've used for a long time now with absolutely no problems that I hadn't dealt with. Sure, that would lead someone to believe that the problem stems from one of the programs because the lack of the problem showing it's self until. Maybe. Makes absolutely no sense though.
View 1 Replies
ADVERTISEMENT
Nov 12, 2013
I have my laptop connected to an external monitor with HDMI. The laptop is always plugged into the A/C,and its cover is always closed, so it's used as a desktop computer.
I have noticed that the monitor often turns off very quickly, sometimes after only a few minutes of idle time. This is extremely annoying, and I don't know how to fix it. In Power Options, the "Turn off display after" setting is set to 10 minutes on battery and 30 minutes when plugged in.
I am running Windows 8.1 64-bit.
View 7 Replies
View Related
Apr 13, 2013
So my computer is dimming like every few seconds, how do I fix it?
View 1 Replies
View Related
Jul 9, 2013
I am running 64 bit Windows 8 on a VAIO touchscreen laptop. Yesterday, my screen started randomly dimming itself. When I went to change the brightness back up, as I held down the button it kept jumping back to a low brightness. When I tried setting my brightness in the power options, it would save to be bright for a little while, then after a time it would dim again. Upon checking the settings, it set it self to have near minimum brightness. My PC does not have adaptive brightness and my graphics drivers are up to date.
View 3 Replies
View Related
Aug 10, 2013
Every time I need to do something on my external hard drive, it has to spin up. I'm using an SSD for my primary HD, so waiting on an external HD to spin up makes me have to wait 4-5 seconds for something to load when it's on my external -- I'm not used to waiting.
Is there a way I can make sure my external HD continues to spin regardless of I'm using it or not? I also notice that I have to wait on it to spin up when I'm shutting down or booting up.
View 9 Replies
View Related
Apr 22, 2014
I install windows 8.1 and i notice that this windows make lot of heat with high fan activity
I change into windows 7 and its all work perfect without extra heating.
I have a dell studio 1458 laptop and i have A04 bios So i really dont know if this cause by the windows 8.1 or the old version of the bios (today the A07 bios is the best, but i dont know how to upgrade the bios safely)
View 9 Replies
View Related
Mar 28, 2014
I have installed a fresh copy of Windows 8.1 Professional recently (about a month ago). It's running fine mostly but there is one thing that keeps irritating me, whenever I leave my PC idle for long (like half hour or so), the system start to do something in background with hard drive light constantly lit.
This keeps going on until I come back and start doing something or it randomly stops doing it. This also happens during work too but rarely. I have heard that file indexing and windows update are possible culprits behind this issue and turned them off but it is still happening. I don't know what's wrong with this OS, it never happened with Windows 7 before.
I mostly use my system for gaming (Steam) and have no antivirus installed beside Windows Defender, in addition to that there is no 3rd party de-fragment program installed. When this happens during games it makes game performance sluggish which is the major cause of annoyance for me.
View 4 Replies
View Related
Feb 24, 2014
I have some questions regarding the new Chkdsk in Windows 8 (I'm using Windows 8.1 Pro 64bit).
note that Windows 8's Chkdsk has changed considerably since the previous Windows versions; so if you know about the Chkdsk in Windows 7 or previous Windows versions, this could not apply to the Chkdsk in Windows 8.
I also point out that I'm talking about the GUI version, accessible from the drive's properties Window.
My main questions are: when Chkdsk has finished scanning, and the results window appears, can I at once proceed with the following, or should I wait some time:
1) In case of an external USB drive, disconnect the hard drive (with "safely remove hardware", even if the cache is turned off), and turn it off.
2) In case of an internal drive (HDD or SSD), reboot Windows, or turn off the computer.
My worry is that if I would disconnect a USB drive, or reboot or turn off the PC in case of an internal drive, before the Chkdsk-related activity is finished, then the file-system of the disk in question could get damaged.
My doubts come from the following facts:
- I have been told that when the Chkdsk results window appears, this means that Chkdsk has finished working with that drive; but I have noticed that some short drive activity is happening some seconds (about 6) after the results window appears (should be a write activity, not sure if also read activity). I noticed this by observing the LED on my USB drives, and also by monitoring the drives in question with Windows 8's new Taskmanager.
- In case of disconnecting USB drives, I have been told that I can be sure that if some drive activity is happening, then the "safely remove hardware" feature won't have effect, and would warn me that there is disk access going on; but I have tried to select "safely remove hardware" while Chkdsk was in the middle of a scan, and the result was that Chkdsk got interrupted (with an error messsage appearing probably from Chkdsk), and the USB hard drive got removed. Though this seems not to have caused any file-system errors (I did another Chkdsk scan later).
You may think that I just need to look at the drive's LED, or monitor the drive's activity with the new Taskmanager, and take note of after how much time the drive activity ceases. Then I would just need to wait so long before disconnecting the USB drive, or rebooting or turning off the PC.
My problem here is that I'm not sure if the new Taskmanager, or the drive's LED, are sensible enough to detect even the smallest disk access, which could get unnoticed. I'm not sure how much I should wait... seconds? Minutes? What do you think? Perhaps there's no need to wait at all?
I did some tests by disconnecting (with "safely remove hardware") a USB drive shortly after doing a Chkdsk on it. Then I did another Chkdsk after turning it on again. I didn't get any error message from Chkdsk. But I'm still worried that there could be an unfortunate moment, during which a disconnection (still with "safely remove hardware") could cause problems, perhaps because in that moment a write operation could be in process.
I think I have read that the new Chkdsk in Windows 8 uses VSS ("Shadow Copy") to check the drives while keeping them online. With this new Chkdsk, I think it is possible to continue using the drive while the scan is happening, even on the system drive.
I was thinking about this: is it possible that the short activity which I have noticed after Chkdsk's results window appears, comes from this Shadow Copy Service, which is "unmounting" (?) the shadow copy used by Chkdsk?
If this is true, is it important to let the "unmounting" task happen, or can I disconnect, reboot, or turn off before it starts? And what happens if I interrupt this "unmounting" task in the middle, while it is in process?
Does it make some sense to wait some time after doing a Chkdsk, or can I at once proceed to disconnect the USB drive, or reboot or turn off the PC (in case of internal drives)?
View 1 Replies
View Related
Dec 31, 2013
recently, I corrupted my explorer.exe while modifying the icons. I had a backup of the original explorer.exe, so I went into elevated command prompt via Ctrl + File > Run new task in Task manager (elevated command prompt). This worked, but for some reason, now when I go to my desktop, I have a black background.
Along with that problem, the desktop fades to black in one second if there is no activity on the desktop. If I open a window on the desktop, it wont fade to black. If I draw a big enough selection box with my mouse on the desktop with no window open, the desktop will stay open until I let the selection box go. When the desktop is black, I can still click and select my desktop icons (if I click in the right place).
I think this is the weirdest problem I've ever had with Windows, it can't be anything with drivers or it would do it with everything. So with what I just said "or it would do it with everything" I mean to say, everything else works perfectly fine, Apps, Startscreen, etc.
View 1 Replies
View Related
Sep 15, 2014
how can i know GPU activity ?
i like a lot process hacker , i have the last version and under Windows 8.1 pro 64bit ,system information gpu is empty (there is always 0% activity
is there a program that let me monitor?
View 2 Replies
View Related
Aug 24, 2013
Ive noticed lately that my router lights are flashing more often than usual. They usually flash but now its happening more often. I also notice more hdd activity this also usally happens once in a while but now is also more often. I ran malware scans and nothing came up.
View 3 Replies
View Related
Sep 15, 2014
I decided to execute a general maintenance on my working computer. I cleaned all parts and contacts with isobutyl alcohol and changed the thermal compound I was using for Artic Silver 5. Now I'm facing a strange scenario. All the motherboard leds turn on when I turn the PSU on but the computer doesn't boot. No post and no fan activity.
May it be a problem with my PSU ?
View 9 Replies
View Related
Jun 24, 2014
I know you can open up resource monitor, and look at the disk tab for the information, but, I am looking for a way to log all of that to a file, so I can see over time, how many bytes are written for each process that is running. Anytool that I can do this with?
View 3 Replies
View Related
Jul 10, 2014
I get this message on startup of Windows 8, before the login screen. Dunno if its from a virus or malware.
[URL]
Clicking OK on that brings up the login screen and I can log into Windows fine. But whether or not i log in or wait at the message, the computer will restart. I get about 2 minutes before it restarts.
[URL]
-I have done a full scan of all partitions with Kaspersky Rescue Disc 10. Found no viruses.
-Have enabled legacy boot menu policy so can boot into safe mode by pressing F8. Message still appears and computer still restarts.
-Unable to Refresh PC, due to drive being locked.
-Unable to Reset PC, due to a required partition is missing.
-I have uninstalled the graphics driver while in safe mode.
-I have done chkdsk, found no errors.
-System Restore Failed.
-Cannot do a sfc scan, due to Windows Resource Protection could not start the repair service. (Running from Windows 8 disc)
View 9 Replies
View Related
Oct 29, 2013
I want to be able to remote control my moms PC. Both our PC's are Windows 8 pro. I used a pro android app called jump remote desktop from my android tablet which allowed me to control my moms PC but it logged her out of her PC so she got a blank display while I controlled it. If I use the integrated Windows 8 pro remote desktop would my mom also be logged out and get a blank screen? How about the chrome web browser remote desktop extension? Am I right this is the only way that I can control her PC while she can still see what I'm doing. Does chrome extension log her out of windows? Another problem with having her log out of windows is then the next time she turns on her PC she will be asked for windows password even though we have it setup to start windows without asking for sign in info. Is chrome extension best solution for me? Easy to setup?
View 7 Replies
View Related
Nov 7, 2013
I recently discovered that one of my drives has been at 100% activity with no data being read or written. This particular drive is used for virtual instruments and samples for music. I've never had issues before, but I found it odd that loading projects took an insane amount of time to load, which lead me to check the disk usage of this particular drive.
Current response time spikes into the tens of thousands. Again, nothing is being written or read. If I open the drive, I can see all my files, but the drive never seems to stop "searching". I've attatched a picture below:
View 2 Replies
View Related
Apr 19, 2013
I noticed an issue with my PC. I always put my desktop into S3 sleep when not in use, normally this happens almost instantly, but now it takes 10+ seconds after the monitor goes black before the system actually powers down.
I had been using Windows 7, but a week ago I did an upgrade to Windows 8. I'm not sure exactly when this behavior started, but I just noticed it earlier today.
I have Hibernate disabled (powercfg -h off) as well as System Restore; so I don't know what could be causing this. The hard drive LED stays lit during the entire delay.
View 2 Replies
View Related
Apr 8, 2013
The hard drive light on my laptop is showing continuous activity and is not going out,even if the computer is left idle.
View 3 Replies
View Related
Mar 29, 2014
I am trying to troubleshoot an issue which has been bugging me for quite a while. Basically, I leave my computer on overnight and don't close it to download stuff and updates and also because I don't like the time to boot up.
Well anyways after coming back to my computer at the morning, my computer becomes almost like a brick. The hard drive activity is pretty much always red, everything lags a lot, mouse event, or any input. CPU is not having much of a usage, but RAM is almost full. I attached a screenshot.
I also noticed one of my hard drives, the one which is slower and I only use it for backup and no programs or games, is almost 100% all the time, while the other one which has windows installation and program files is not that intense in activity. Also notice the read and write speed is not that big, but response time is huge.
It only happens if I come back to my computer for a long time not attending it.
I disable system restore, Windows defender real time protection and sleep.
View 2 Replies
View Related
Apr 18, 2014
I have a Asus T100 tablet with 32GB SSD. I bought a 64GB SD card to augment the storage on the tablet. The problem I am having is that the SD card disconnects after a few minutes of no activity, I then have to take it out of the tablet and pout it back in. I then have the folder in my C Drive again. How do I prevent the SD card from disconnecting so that I can use it as additional storage?
View 1 Replies
View Related
Feb 8, 2013
When Windows 8 menu appears on start and I choose W7 - instead of loading W7directly , the computer is new-starting again and only than starts w7. That's a funny "behaviour"....
Also, after starting the computer, the menu is not directly shown up, first is this turning wi8 circle (like in the setup) and only about 30 sec. later comes the menu. I am using windows 8 enterprise, test version.
View 7 Replies
View Related
May 6, 2013
Have a question regarding "Local Account". I'm having problems connecting to the Win 8 laptop from Win 7 as it will not accept my sign in credentials. With that, am I to assume that this is because the credential aren't "Local", and thus this is what this is for???
It will not accept the "Microsoft" account I use to log into Win 8 laptop.
With that, if I choose to go with the "local account" can I easily switch back to the Microsoft one?
View 8 Replies
View Related
May 1, 2013
I had windows 7 and outlook express on it. The computer crashed. I had to get a whole new computer with windows 8 and just outlook. I have a folder with all my old outlook express emails in it but it is not compatible with outlook and I NEED an email in the old outlook express file. How the heck can I get this? When I try to open the old files it says " must be opened with outlook".
View 7 Replies
View Related
Jan 4, 2013
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?
View 3 Replies
View Related
Jul 2, 2013
In a few days I will receive a Lenovo Thinkpad X1 Carbon with Windows 8 installed. And separately I will receive an OEM Win7. Win7 is certainly what I intend to use, and I had originally thought I would wipe out Windows 8 and install Win7. But now I am wondering if I can somehow preserve Windows 8 for occasional use. (I would have ordered the machine with Win7 but this is a refurbished machine.)
I would rather not have to understand UEFI. (I'm sure it would be interesting, I just have other things to do with my time.) And, although I do it sometimes, and will if I have to, I do not like diddling with BIOS settings.
I know that factory installed operating systems generally can't be moved to other machines. And I fear that the factory installed Windows 8 that I will receive may not even tolerate being installed, e.g., in a smaller partition or under something like VMware (another complication I'd like to avoid).
View 4 Replies
View Related
Feb 12, 2013
I am currently running windows 8 64bit OS. I have a windows 7 32bit .iso file. I want to install the windows 7 32 bit while keeping the windows 8 64bit too.
View 7 Replies
View Related
May 8, 2013
how can I transfer my music files plus artwork from my windows vista laptop to my windows 8 laptop.
View 9 Replies
View Related
Jan 19, 2013
I just bought a Lenovo E530 64 bits-Windows 8.I need to connect to a Windows 2000 server using Remote Desktp,but Windows 8 doesnt'allow the connection.
View 5 Replies
View Related
Aug 3, 2014
I have a Samsung Series 5, 530U (the remaining digits I don't recall right now).
I purchased it from a digital superstore, like a market, rather than a regular PC store.
The device is set for Windows 7, although on purchase, I asked for Windows 8 to be installed.
Now, a BSOD has stopped me gaining access through refreshing, restarting, safe mode or any of the options available through the troubleshooting menu.
I retrieved my data using a SATA, and now wish to wipe the system of Windows 8, and avoid all the hassle it has brought me, returning to it's factory settings of W7.
I do not have a disk, or anything to do so. When I go through the menu on start-up, I click 'restore system' but I am then prompted for 'recovery mdeia or installation disk'.
Is it possible to just reset the whole PC and start from the day it left the factory?
If I need a disk to reset the original settings, where can I get it from and would simply loading it when prompted fix my problem?
All I want is to be able to use my own PC. I want Windows 8 cleared off and a reliable, original settings PC.
View 5 Replies
View Related
Mar 21, 2014
I have 3 user accounts on my windows 8.1 laptop; 2 administrator types and 1 standard local account. While logged in using one of the admin user accounts or the local account, I can access the store app. However, when i log in using the other administrator account and try to access the store app, i just get the spinning circle and nothing happens. Is there something wrong with how one user account is set up that is causing the problem. Do I have to delete the user account and try re-establishing it.
View 3 Replies
View Related
May 8, 2013
At random times, windows explorer on my windows 8 computer stops responding. When it stops responding I try to restart it in task manager. Then my desktop restarts and the then everything disappears except for my open tabs and the color of my desktop. But all of my applications are Gone. I can't access anything. I then restart and everything is back to normal.
View 3 Replies
View Related