i've just bought a new laptop Acer E1-531 without OS and i've installed windows 8 64-bit on UEFI system but i recieved a BSOD with the error code IRQL_NOT_LESS_OR_EQUAL my BIOS version is 2.14, so how to install windows 8 on this laptop
View 2 RepliesThese are the steps I've taken-- OS Win 8, pre-installed by Acer.
1) Make recovery USB using the Acer recovery wizard, with the laptop in stock configuration.
2) Install msata as secondary drive
3) Go to Computer management and initialize the msata and format with GPT style. Format the drive, assign a drive letter. (I only see 1 partition). I did this as NTFS/default allocation size. Is this where I went wrong?
4) Remove the factory HDD (listed as HDD0 in BIOS)
5) Boot to BIOS
5a) in BIOS, disable secure boot.
5b) Go to legacy mode
5c) Set msata (HDD1 in BIOS) as #1 in boot order
6) boot to USB recovery drive, follow steps to restore from USB (clean install, make partitions as it wants)
7) remove USB, reboot.
Error message-- no bootable device. I can basically load the USB again or the BIOS.
Ok, acieved to downgrade/upgrade the BIOS version with the Acer XC-603 to be able to downgrade to Windows 7. Do i really have to delete all partition or can leave the recovery partiton un touched to always be able to recovery the original OEM Windows 8.1 that comes with the machine from out the factory? I always want to be able in case i mess up recover my Windows 8.1 installation thats pre installed on the recovery partition.
View 4 Replies View RelatedI wanted to install w7 so i accidentally formatted some drives. then noticed i cant install w7 because of the gtp partition. as you can see in the pic partition 1 the recovery one looks like it wasn't formatted( i cant remember as i formatted the partitions 3 months ago) so is there any way i can use that recovery partition to restore windows 8
I have tried the alt+F10 menu. none of the following ways in the menu let me restore or reset the laptop. i tried all of the options in the picture none worked
So I am left with an laptop with no os how can i restore the pre installed Windows 8 or install w7 (i have a w7 cd)
The laptop is an aspire e1-571
Original ACER desktop with Windows 8 and it was upgraded through the Windows Store to Windows 8.1 The upgrade came up with errors "the Secure Boot watermark".
I tried various things suggested to fix the error but was unable to.
I backed up the computer data.
I formatted the drive and installed Windows 8.1 from a thumb drive and it installed correctly without errors.
I was unable to install a Product Key Licence as the computer had it imbedded in the bios and I have no label with the key on the machine.
I should not have to purchase another licence. How do I find the original licence key?
I bought an Acer Aspire V3-571G brand new a few weeks ago and I'm sending it back for a refund. I'm currently having problems with formatting it. I need to remove all my personal information from the laptop but Windows 8 was pre-installed with no recovery disks in the box. When I try to format the main drive it says I can't because thats where Windows 8 is installed and running from. This is my view from Disk Management:
View 8 Replies View RelatedI have an Acer Aspire M7710 which I installed Windows 8 on.
I wanted to use the reset windows option under the advanced settings option. After selecting the reset option it said it would reboot. This was about 5 hours ago and all I have had is a black screen.
Eventually I powered off my computer after 4 hours waiting as something seemed wrong. When I powered my PC back on I get nothing, just a black screen again.
I thought I would just boot from the Windows 8 dvd and reinstall but for some reason I can't boot from dvd anymore.
I googled around looking for option how I could enter my bios or change the boot order for cd/dvd but I can't get any keyboard shortcuts to let me boot from dvd or enter the bios.
How I can boot from dvd and reinstall?
I am using Windows 8.1. I have an Acer Aspire V5-571P computer with Windows 8.1 pre-installed. I want to install my licensed copy of Windows 7 Professional on it as a dual boot to dual boot Windows 7 and Windows 8.1. I have seen that it can be done, but I cannot figure out how to correctly do it. I have already had to re-install Windows 8.1 once from a USB Recovery drive which was not fun. So how to do it and get it done. I love windows 7 Pro but I can't figure out how to do it.
I have already turned off secure boot in bios. However, UEFI mode is still active vs legacy bios which is the other mode I have.
Acer Aspire V5 laptop that was running an OEM Windows 8 to upgrade to 8.1.
After selecting the Upgrade to Windows 8.1 via the store, the system went through it's install procedure, however after it does an auto reboot, it gives you a blank screen with the message No Operating System found, in the upper left corner.
But, you can turn the machine off and back on, and it will boot just fine. However if you select restart it does the same thing "no operating system found", on restart and again you must power down and power back on.
I have searched for fixes, but all seem to point to some sort of re-install process. I am not to crazy about the idea of re-installing to factory settings or doing a repair back to Windows 8 and attempting to upgrade again, are their any known shorter fixes for this?
And if I do go back to Windows 8, and try to upgrade again, what is to say it won't happen again?
I have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
I'am trying 8 hours now to install Windows 8 to an Acer Aspire 5920g.
Problem is that when the usb flash drive comes to hdd presenation point the hdd isnt being displayed.
My guess is that Sata AHCI/IDE controller driver for the 5920g's chipset is missing from Windows 8 installation dvd.
I googled very much and i can only find XP and Vista Sata Drivers while oi need 8's.
Is there an alternative? I must get 8 installed in that laptop.
I have an Acer aspire e1-570 where the c: drive partition is deleted. (It is a friends pc and he treid to put win 7 on it) All the other partitions are still there. He did not make any recovery dvd or usb stick.
I trayed to get i restored to factory settings, but can not.
It says it is missing a partition.
I know how to install windows but I am not able to do it before this problem,
1. Acer log on screen (Loading)
2. After loading, this will be the next screen, the system will restart
3. Then after restarting, this will be next (preparing automatic repair then diagnosing)
4. then after that, it will ask to restore the system
5. If you select restore, the system will restart then stuck in this screen
I am new in windows 8 and acer. I don't know what happen but before the system says its updating, then when I restart it this problem occurs.
I have an Acer aspire S3 Ultrabook Laptop (one of several laptops) and I am wanting to upgrade the os to win 8 pro. I have the win 8 pro pack,which is a full version i think,it does not say it is an "upgrade". Am i still able to use this win 8 pro pack to upgrade?( i thought upgrade packs are in fact cheaper)
There is the windows upgrade anytime link which i used just now,but it said that the windows key is invalid.It is a brand new pack with a new key.
I have read instructions online that say i need to insert the disk.But i am wondering if all the acer software will be deleted on C drive,although the instructions say it will be kept intact,as it has the acer recovery software in control panel on it. If the acer software is deleted how will i reinstall those? I am guessing that the win 8 pro disk will have all the right drivers?
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedTried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
View 2 Replies View RelatedOEM keys pre-installed in the my laptop as i too want to clean install windows 8.1 also my os was windows 8 Single Language and i have a 8.1 Pro ISO
View 2 Replies View RelatedI have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
I bought a HP notebook with windows 8.1 installed , but no installation DVD . In order to create one I downloaded from Microsoft , ( from windows.microsoft.com/en-us/windows-8/create-reset-refresh-media ) the Windows 8.1 Setup ( file OSGS14-WindowsSetupBox-32bitand64bit-English-4141408.exe ) and ran it but always receiving the message : we can't connect right now . I have tried more than 20 times and failed.
View 2 Replies View RelatedI tried to install Windows 8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black.
View 3 Replies View RelatedI am trying to install the Windows 8 DVD over the current XP OS, but in MyComputer, the DVD Drive isn't listed in the tree view. Device manager says it's installed properly and functioning well. My Q is this: how do I run the installation DVD from the DVD drive using the Command Prompt. On Windows Start-up I hit F12 to access the boot order, and when I arrowed down to the DVD drive and hit ENTER, Windows would just jump straight to the XP start-up process. It's like something won't let me access the DVD Drive.
View 9 Replies View RelatedAcer laptop already has Windows 8.1 installed. It has a MBR disk. My USB Flash Drive won't boot from it but it does my my desktop so not the USB flash drive.The flash drive was created for UEFI or MBR boot using Rufus. I tried the tutorial in sevenforums to convert the Acer to GPT but it says the boot drive is in use and can't. I tried to boot to a Command Prompt but that gives me an X: drive and I can't change it to C prompt. I have done this before from a boot drive and it worked but won't on this machine. How can I get this converted from MBR to GPT??? How can they make that tutorial work for them? They are doing it from within windows there??? This machine BIOS has nothing for legacy or UEFI or secure boot for sure. Is my only option MBR then? If it is what do I make the flash drive with as Rufus option says for UEFI or MBR but won't boot this machine. Yes I have it to boot first but it lights up but goes straight to windows.
View 4 Replies View RelatedOK, I have an Avatar Pitbull Gaming Computer. I have a blank ssd and i have the WIM file and WINPE on a flash drive trying to install from the flash drive. When I boot to the flash drive i get a black screen that says operating system loading??? There is no operating system so im at a loss.
View 5 Replies View RelatedI installed windows 8 pro and here are the issues I am having.
Every time I install (Pro Disk) when it finishes and restats, it goes right back to the beginning of the install Once I can get it installed, once the first screen spins, it stays black, but if I sleep and wake it, it goes right to the sign in screen-weird.
Then, it says no updates have been searched or ever installed, when I search I get the Error Code 80248007 cannot update.
My PC got into a loop where it kept trying to install Windows 8, crashing and trying again.
Somebody advised using killdisc to wipe clean, however, I can't boot from the Windows 8 disc to install because hard drive is not found.
What steps do I need to follow in order to get it running again?
We got a nice Samsung Series 5 Ultrabook and all it needed was a hard drive. Now.. here's the problem.. I'm good with a screwdriver or a soldering iron but software isn't my strong point.
It's a genuine Windows 8 machine and as I understand it, it will have the genuine COA embedded in the bios right?
Now I've tried installing Windows 8.0 64bit OEM which I believe is the correct uk ISO, and I've tried the Pro version also but with both, neither seem to pick up the embedded COA and therefor do not activate.
Am I correct in thinking that it might be because I have to use CSM mode in the bios to get it to recognise my installation media? If I had a UEFI version would it make any difference?