Setup Installation :: COA Change When Upgrading From Windows 8 To 8.1?
Feb 9, 2014
I have been having several issues with Windows 8 (more specifically Windows 8.1).
My Toshiba U845T-S4165 has been dropping WiFi access, switching to "Limited" WiFi status, or cannot connect to my network whatsoever. The most aggravating thing is that this happens at seemingly random times and frequency. I can go a week or two with no issue and then one day I have constant problems where I can't connect after repeated tries. I have trouble-shooted everything I can and have tried some workarounds I found online. I finally contacted Toshiba and all they did was delete my network driver and redownload/reinstall it. That seemed to stabilize the problem for about 8 days or so but now I am having consistent issues.
I have read that many people started experiencing this problem after upgrading to Windows 8.1. While I can't say with absolute certainly that my problems began after upgrading, but they may have. So I am trying to revert to Windows 8. Now this would be a seemingly easy process however ignorantly and stupidly I did not create recovery media after I initially bought the laptop and built-in recovery drive has been, again stupidly, deleted during my upgrade process to 8.1. So in short, I have no recovery media.
I did find a source online that sells Windows 8 downloadable software that I can download, burn to DVD, and then start from scratch. However, I must provide my own COA. I used Belarc Advisor to find my current COA. However, this COA is associated with Windows 8.1. So my ultimate question is: Will this COA work with a Windows 8 recovery media? Did the COA change when I upgraded from Windows 8 to 8.1? I don't want to start this process and then get screwed midway through because my COA isn't valid when downgrading.
I have purchased window 8.1 pro DVD from a retail store please note it is complete windows DVD not an upgrade pack i want to upgrade my window 7 ultimate to win 8.1 pro with this Complete DVD and retail key provided with it, upgrading with this DVD note i don't want to lose any of my data and installed apps which are compatible.
I have Windows 7. Do I need to install Windows 8 so that I could upgrade to Windows 8.1 or can I directly upgrade to Windows 8.1 using ISO's available?
I've tried to upgrade from windows 8 to windows 8.1, but it didn't work. all the steps of downloading and installing through Windows store went well, until the computer restarted and was configuring things then a blue screen appeared showing that the computer ran into a problem, then the procedure to go back to windows 8 started. I'm now working with windows 8. My computer came with windows 8.
I have made a terrible mistake when I installed the Windows 8 90-Day evaluation. I have a 64-bit CPU (AMD 5800K) and 8GB of Ram, and I accidentally installed the 32-Bit version of the trial.
Is there any way I can upgrade without having to do a fresh re-install?
Original ACER desktop with Windows 8 and it was upgraded through the Windows Store to Windows 8.1 The upgrade came up with errors "the Secure Boot watermark".
I tried various things suggested to fix the error but was unable to.
I backed up the computer data.
I formatted the drive and installed Windows 8.1 from a thumb drive and it installed correctly without errors.
I was unable to install a Product Key Licence as the computer had it imbedded in the bios and I have no label with the key on the machine.
I should not have to purchase another licence. How do I find the original licence key?
The method for obtaining a retail Windows 8.1 ISO has been published and re-published. It seems that most people who are interested in the ISO want to use it for a clean install. I respect that, however I want to upgrade my copy of (retail) Windows 8.0 Pro to Windows 8.1 Pro.
Can I use the retail Windows 8.1 ISO to upgrade from 8.0 Pro to 8.1 Pro?
I have an asus u43f laptop currently running windows 8 pro with a MAK. I downloaded the 8.1 pro iso from the vlsc , ran the upgrade advisor which flagged 3 items which were taken care of, but the upgrade still fails. after the reboot, I see the frown face, the a message about a driver violation, then it goes back to 8 and spits out that code.
So I have linux ubuntu on my little homemade computer and finally was able to get a copy of windows 8.1 and how to just get rid of my ubuntu machine and boot windows I'm not trying to dual boot I just want to have windows on my computer finally.
Right now I have an asus h61-le-CSM motherboard with EFI; it's a little older with a i3 2120 processor. On Friday I'm upgrading to a Gigabyte GA-Z77X-UD5H with a i7 processor.
Right now, I have windows 8 installed. I believe I purchased the upgrade version, although the receipt from microsoft in my e-mail has no mention of the word upgrade, it just says Windows 8 Pro. I am going to want to do a clean install with this stuff which I am capable of doing, however I don't know what I need to do to keep Windows. Will I be ok just re-entering my key?
I recently went through a ton of issues with my lenovo y510p laptop and since it didn't come with a recovery disc, I was forced to reinstall windows 8 through a recovery disc on a usb stick. However, the only one I was able to get was an "evaluation version" of windows, so I've lost my original version of windows 8 after the reinstall. Is there any way to find my old key so that I can upgrade? I've tried a key finder, but it only finds the evaluation key.
Would I have to contact Lenovo to see if they can give me my product key or is there an easier way?
I have a laptop that has win 8 but not the Pro version.And it apparently does not have Bitlocker on it.
I have the win 8 Pro upgrade software but i think its the full version which i bought for another pc.And the upgrading instructions on the outside of the box talks about upgrading from vista or xp only.I am running win 8.
The only reason I am wanting to upgrade to win 8 Pro is to have Bitlocker.
Is it not possible to install the win 8 Pro OS?
Or is there another way of obtaining Bitlocker?
Its an acer laptop. The system info says: The system type is a "x64 based-pc" Celeron cpu 1017u 1.6 ghz,2 cores,2 logical processors, Win 8 version is 6.2.9200 build 9200
I have a small computer that is simply used for email, I want to upgrade the system from Vista to Win 8 Pro, I ran the initial upgrade assistant, and it claimed it would work on my system... I bought the upgrade, started the installation (choosing to keep all windows settings and files) and during the actual installation process, it freezes at 11%.
I know that others have asked questions like this, but I don,t have time to do a clean install, can this installation be completed without having to move all of my data from this machine?
Before upgrading I had 4 partitions for my UEFI Windows 8 install, the main partition for the system, and the three others it created during install. After upgrading to Windows 8.1 it has reduced the main Windows partition by 472MB and created a new 472MB recovery partition.
I have not yet run any Windows 8.1 updates as the drivers for my laptop are tricky and to make everything work as it should I need to install them before running updates. What I have run is Disk Cleanup, which I had remove the old Windows install.
Is it normal for Windows 8.1 upgrade to create this new recovery partition and is it going to delete it or the old recovery partition and merge it with the main Windows 8.1 partition?
I already have a W7-Windows 8 dual boot machine.I want to upgrade Windows 8 to Windows 8.1
Are there any major considerations I need to be aware of when upgrading Windows 8 to Windows 8.1? Does the Windows 8.1 upgrade handle and cope with an already dual-booting machine? I don't want to wreck/lose my w7 installation at all.
I'm using Windows 7 Ultimate 64 bit,i choose upgrade in the installation process of Windows 8 Pro 64 bit,at the end my computer restart 2 times,showing an error with sad smile "" after that it restart again and says that upgrading failed and it revert back to Windows 7 Ultimate 64 bit...
Today i used Windows 8 Upgrade Assistant (Windows8-UpgradeAssistant.exe) ,it found 4 incompatible programs,are they the cause of fail upgrade
Although during the upgrade the Windows 8 Setup didn't found any incompatible programs..
I just upgraded to Windows 8.1 and I have installed all the updates provided by Microsoft but it seems like I cannot change my brightness in my laptop although it was working fine in Windows 8..
How do I change the USB port that Windows to Go listens the drive while in use?
I have this computer, with an Asus P8H61-LE Motherboard. As you expect, it doesn't pack USB 3.0 ports. But it does come with some nifty PCI-E x1 slots, so I've bought a random USB 3.0 PCI-E card, with 40 pin for front panel. Works amazingly. Fast and beautiful, exactly what I've expected. BUT, it doesn't have its own BIOS or something, so my UEFI BIOS cannot boot from devices connected to it. In fact, it doesn't even detect anything there until I boot up to the O.S.!
And I have this Windows to Go Setup. Works like a charm on USB 2.0, but sometimes I feel the bottleneck, and wouldn't hurt using my only USB 3.0 device on those USB 3.0 ports, eh? I've tried disconnecting and reconnecting it on USB 3.0, but WTG just ignores it as if it weren't there. Even when I connect to a different USB 2.0 port, it doesn't detect.
This USB port remapping would serve for other uses too. Once, I've connected my drive to a client's computer, for repairs. But it took longer than I expected, and I had it connected on the front USB. I needed to connect other thumb and external hard drives and had to use the rear USB ports for this, because WTG didn't detect anywhere else.
It says: Windows can't be installed to Drive 0 partition 2. (show details)
After I click that I get a 'Windows Setup' popout that says Windows cannot be installed to this disc. The selected disk has an MBR Partition table. On EFI systems, Windows can only be installed to GPT disks.
How to change the Start Page background. About a month ago, I pasted a picture on my Photos background (Commander Riker is standing there with a horrified look, explaining "It all started with Windows 8!" But the picture is blurry.
Currently i am using windows 8 pro retail version.But i want to change the retail edition of my windows 8 to volume license version of windows 8 pro so that i can activate my product with the key provided by my corporate network.How to change windows 8 pro retail to windows 8 pro vl without reinstalling windows??
When I click photos a screen comes up that says the following "All your photo sources are hidden.to show some change your settings" What do I need to correct this so when I click photos the photos are shown?
I have a VHDX which I sometimes boot from and sometimes use as a VM in Hyper V. It has Windows installed on the default C: drive.
This is somewhat confusing as the C: may be the original C: drive or the VHDX C: drive (with the original C: drive renamed to H: in my case). I want C: to always be the native boot and T: (for example) to always be the boot for the VHDX.
Can I change the VHDX to have Windows installed to say T:? I was thinking of renaming all instances of C: to T: in the registry and updating BCDEDIT. It is not possible to change system disk in disk management.
If this is not possible can I re-install windows on the VHDX and specify a different letter and C:?
This is how it looks when booting from VHDX:
Code: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 465 GB 1024 KB Disk 1 Online 931 GB 31 GB * Disk 2 Online 483 MB 0 B Disk 3 Online 65 GB 381 MB
