I have 5 screens, 3 screens connected to a display card, and 2 on motherboard.
When i was with windows 7, no problem at all for the past 2 years. Once upgraded to Windows 8.1, windows DOES recognise all 5 screens, however, it will revert back to a single screen and 800 x 600 resolution.
I will have to enable and reposition all screens again until the next restart.
I have a brand-new HDCP supporting monitor (native resolution 1920 x 1080,) on which I play the latest blu ray movies from the computers built-in blu ray drive, and a 9 year old flat screen non-HD plasma TV (on which I watch You Tube, BBC iPlayer and 4OD, streamed from the PC via a VGA cable,) both connected to my GT610 NVidia graphics card.
It seems I can only get them at the same resolution. My desktop does however have it's own on board graphics processor. Is it possible to run these two devices at different resolutions? (Since the ancient flat screen can only handle resolutions up to 1600 x 1200.)
I am having a slight issue with what I am assuming is my video card. I have a Powercolor HD7870 Tahiti MYST Edition and on some screens I will get these random rectangles that show up. I have a few pictures to show what I am talking about.
It almost always happens when I am on Twitter and most other websites dont have this issue. It is more annoying than anything else, it doesn't seem to affect anything but I figured that I would post here and hope that it isn't a big issue.
Since yesterday, my graphics card has been starting to go to black screens and emit loud fan noises. I suspect it may be due to a recent update regarding something about WDDM 1.3 since that too was installed yesterday.
I have managed to play The Sims 3 at max settings today without the problem, but the problem kept recurring after that. Even with non-intensive activities like watching YouTube brought my desktop to a screaming halt, literally.
I've been looking at some of the MATROX graphic cards for multi-monitor output -- up to 8 possible !!
Now any decent software to run these -- the standard software seems OK at running TWO monitors but I want to be able to run several more. You can run more but it gets a bit complicated managing this from within the standard windows system itself.
Five Best Tools for Managing Your Multi-Monitor Setup
So I'm running 2xR9 290X (crossfire) with 3xQnix Qx2710 monitors. One of the qnix monitors was purchased with HDMI/DisplayPort connectors along with the usual DVI connector (normally these monitors only come with the D-DVI input)
I had a 2 monitor (with just the two DVI-only monitors) setup for a while that was working fine.
Since installing the third monitor I'm experiencing several weird things:
- On boot, until the Windows login screen comes up (Windows 8.1), there is nothing on the non-primary DVI monitor (so my setup is my primary monitor is one of the two DVI monitors, and then the left and right monitors is another DVI-only and the DP monitor).
- If the monitors go to sleep, or I put the computer to sleep and wake it up, any windows that were on the non-primary DVI monitor are moved over to the primary DVI monitor. Windows on the DP monitor do not move in this configuration.
- Within CCC, after sleep / monitors off, I have to restart CCC's control of the color settings for the non-primary DVI monitor. (I'm forgetting what the actual button says, but it's the button under the Display color controls settings where you can manipulate the R/G/B channels - I have to use the GPU for color matching since the monitors don't have any inherent ways to change R/G/B levels
If I only connect the two DVI monitors this is not an issue.
If I connect one DVI and the DP monitor, after sleep/wake any windows that were on the DP monitor are moved over to the primary monitor (again, note that this didn't happen when all 3 monitors were connected).
I have tried the newest version of CCC, as well as the current beta version - same behavior in both.
I have tried using HDMI instead of DP - same behavior
Aspects of this sound similar to the issues discussed in this post : [URL] ......
What I don't understand is why the second DVI monitor is acting so oddly when all 3 monitors are connected. Why would there be no picture when the computer boots?
My computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
My Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
I just bought an Nvidia 620 card today. I run both Linux and Windows on my system. When I go to Linux, everything work fine. But in Windows 8, the GPU fan start to scream. Its too noisy! I even updated the drivers.
I recently updated to Windows 8.1 (64-bit), and I immediately noticed that my resolution had taken a strange turn. Everything except the taskbar seems to be a lower resolution than before. This suspicion was only strengthened when I launched a game that I had running in 1440x900 windowed, and it didn't fit properly on the screen. I checked my display settings and used printscreen to check the resolution and both said 1920x1080, but when I used Puush to take a desktop screenshot, it came out as 1536x864, whereas before installing 8.1, desktop screenshots came out as 1920x1080. I tried changing the resolution and changing it back, but I'm still having the issue.
Every time I try to download the HD7310 AMD driver instead I get a program that wants to charge me to auto update all my drivers.
I just want to download the latest Windows 8.0 64 bit driver for HD7310. I'm on a Laptop and the video text is horrid. I have catalyst software installed but every time I try to adjust brightness and/or contrast it looks nothing like the sample page. It gets progressively worse the more I attempt to adjust it. I can't believe it's this tough to get legible text on a monitor in this day and age.
Ever since I installed Windows -8 Pro ( 64 bit ) on my MultiMonitor system, all my screens go black with following error message.
" AMD Drivers stopped Responding & has Recovered"
It happens so many times an hour that I had to stop usingWindows -8 completely. Even the worst thing is that if I have more than one harddrive & driver crashes, then on next reboot my system automatically startsdisk checking which takes hours for a 3.0 GB slave HDD. I never had thisproblem with Windows -7 using the same system.
My system configuration is as follows.
Dell T-7500 Workstation. Intel Xeon E5645 2.4GHz 12 GB DDR3 RAM AMD Fire Pro 2460 Video Cards ( 3 of them. Each supports 4Monitors ) 12 Dell 24 inch ( 1920x1200) Monitors
I downloaded AMD Drivers for workstation & FirePro 2460Video card from following AMD Links.
I installed windows 8 on my pc and it doesn't use the whole screen. There's a margin all the way around the screen. I have a 23" 1080p display and AMD Radeon 7450 graphics card.Also, OpenGL is not working at all, for anything.
I am running Windows 8 on a Samsung 350V5C laptop 6GB RAM.
I'm struggling connecting to a second monitor, the problem being my laptop connects OK VGA to VGA but doesn't stay connected. After 5 seconds i get the disconnected 'beep beep' then it immediately reconnects and again after 5 seconds disconnects again. I did get it to stay connected the other day so i know it works but is was pure luck and just trial and error, however, when i went to connect again i got the same problem, also when it did stay connected i just got 'duplicate screen' when i just want 'Second Monitor Only'.
Here's what I did: Control Panel > Hardware & Sound > Display > Project to a second screen, then i have tried all 4 options PC only/Extend/Duplicate/Second only and i get the disconnect then reconnect every 5 seconds again.
Do I have to change any other settings, either on monitor or laptop?
I have to reinstall Windows 8 on my laptop for some reason. So after installation finished I went to Device Manager for Installing Drivers. After all the other drivers like Chipset, Network, Audio etc, I went to the Install the Display Driver. There I noticed that under the Display tab my NVIDIA GT 650M is already listed but usually if any Device driver is not installed then it will be shown as Unknown Device or Standard VGA Adapter. But here it shows that it is working and one more Thing I noticed is that in the display tab it was written:-
NVIDIA GT 650M (Microsoft Corporation-WDDM 1.2)
So my question is that should I install the NVIDIA driver from my ASUS Driver And Software Utility Disk or should I keep it as it is? I have heard somewhere that WDDM drivers works better than any other Driver with Windows 8. Is it true? I didn't get any Performance Fall or any BSODs etc and games are also working.
Resolution of my monitors 1280, but I can't open apps because "resolution is less than 1024" (error message). If I update video driver Windows does not work, being necessary to restore to a previous state.
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
I just updated to windows 8.1 yesterday all is good, today I receive a update for Advanced Micro Devices graphics adaptor WWDM1.2 AMD Radeon HD 75209. It failed came back as error 80070103 says trying to install a driver that's already installed or a driver of less compatible . So I looked in add and remove I do see a advanced micro device but I don't know if it's the same or better how do I find out. I also googled it and read that it's never advised to update drivers threw windows update, go directly to the makers web site so how did this happen and what should I do?
After upgrading from Win7 (x64) to Windows 8.1 Professional N (x64) my system started to freeze randomly. It seems to be a driver related issue, since the freezes do not occur, when I disable the video card in the device manager. I recently upgraded to the new beta driver (v14.1) which made it even worse.
I contacted the ASUS-support already. They said the card is broken - which does sound strange to me, since it worked fine using WIN7.
Running win 8 and installed Windows 8.1 and device manager told me windows shut down my video card (560 Ti) because of a problem and began running default drivers. I tried everything from removing and reinstalling drivers, reseating the video card, changing slots, etc....
As soon as I reverted back to Windows 8, EVERYTHING ran as fine as before.
AMD FX-9370 32gb G skill ASUS M5A99X EVO Windows 8
I installed windows 8 on an Acer aspire 8320TG with AMD HD 6370 graphics card. This laptop is according to Acer not suitable for windows 8 but it worked. However, my screen is extended to the right and I can't switch this off. Since I don't have a second monitor I only notice this when my mouse sometimes gets lost or when I make a screenshot. I tried changing some settings in the "screen resolution" dialogue, without success. Am I just not finding the right settings for that or is it some compatibility-issue?