I keep getting the error " windows resource not available" when I try to run certain programs. The program uses an rs232 connection to a casio cash register and the program is cv22. I am using a usb to serial adapter that I know works.
View 1 RepliesIt seems my windows ran into a problem. I am using Sony VAIO with OS windows 8, ram 8 GB with Nvidia gt780m graphic card 1 GB. It all started when i restored my pc (without recovery disks) as i was getting some problem in installation of Game (assassin Creed 4) and after restoration it worked fine and well. Then after a week or so my windows crashed and I rushed to service centre as I was not having my recovery disks to restore it. back I got my windows again and so I tried to install the same game but it was not installing showing error (screenshot is attached). I looked to other software like NFS MW 2 again I had same problem.
To ensure that installation files were not corrupt i copied the same files on my friends PC and installed it and it worked well and fine on it. Then I got to know it has something to do with my windows system file so I Google it and found the solution to run SFC/scannow command I did the same and there it was the corrupted files of windows(SFC details are attached). I found one particular solution (though it didn't work) Dism /Online /Cleanup-Image /RestoreHealth command and tried to repair those files but it alwayz get stuck. How to get on to this issue cuz neither it's allowing me to play games nor letting me run a application properly it alwayz interrupt the application and say that certain .exe need to be closed.
Windows resource protection found corrupt files but was unable to fix some of them..
View 1 Replies View RelatedI recently had a power failure while playing DotA 2 and now my fan/harddrive is making a weird noise.
Resource Monitor points that my C: drive (My only one) is running at 100%. Mostly it is being used by MsMpEng, which should be Windows Defender. It shows it scanning stuff (C:Users-----DocumentsGames DownloadsStarMade.exe). When I open Windows Defender it however doesn't show it scanning anything.
MDL project. There are a few BIOS dumping tools out there but none specific to this task as yet.
The image could then be used in replacement for the standard W8 flag on systems without UEFI.
Recently my mom visited a website that tricked her. She downloaded and installed some stuff she didn't need. I removed the stuff but noticed some other problems. I'm not sure if these are new problems caused by the useless stuff she installed.
Control Panel -> Programs -> Programs and Features is not showing all installed programs. Oddly, the only listed installed programs have names that start with the letter M. 14 programs are listed. See picture. Start Menu -> All Programs -> I suspect some programs are missing. I have a Win 7 style Start menu because I am using IObit's Start Menu 8 program. Control Panel -> System and Security -> Administrative Tools was empty. I fixed that by using SFC /SCANNOW.
I tried using System Restore to go back to an earlier date, but that didn't work. In the process of trying to do that I discovered that BitDefender Internet Security 2014 doesn't get along with Windows 8.1's System Restore feature. I uninstalled BitDefender and successfully went back to an earlier date but still had the same problems with missing programs. I undid the restore. I created a new Windows user account. The new account had the same issues: missing programs in the Start menu and Programs and Features menu.
On Windows 8.1, when I open Programs and Features in Control Panel, it does not show all of my installed programs. I am trying to remove some programs and they are not listed.
View 8 Replies View RelatedI have not been able to upgrade from Win XP to WIN 7 because the invironment I would have needed to set up in Dos Box was far too complex. I have heard that WIN 8 will use all system Network settings (Novell) and run my DOS programs as well as WIN XP did. Is that right?
Is there a Novell network driver for WIN 8?
Does it make a difference if I install the 32 or 64 bit version of WIN 8?
I have installed windows 8 64 bit on (C) and I would like to install the program files, printers, etc on another drive. I have 3 drives 1- ssd, 2- 1TB drives, 1- blu-ray player. This is the first computer that I built. Now how to finish my project.
View 1 Replies View RelatedI cannot load programs via the web (this may also be true of programs from disc) I have tried to install programs from Bank Tree, Dassault Systems, and numerous others and they all freeze during the initiation stages, I have tried installing in safe mode but this will not work as due to the safe mode, something is missing, so I turned off the firewall but this had no effect at all, this situation is driving me mad I'll bet it's the pesky Windows 8.1 that is the problem.
View 12 Replies View RelatedI don't know a lot about windows 8. I have a general enquiry to make. I would like to know that if I reinstall my windows 8 will I have to reinstall the programs of different drive. For example like I have my main OS in C: and many of my programs like steam and some other games are installed in D: so when I format my pc will I have to reinstall the programs present in D: or will there be any kind of error or something.
View 4 Replies View RelatedI've been running Windows 8 x64 on an HP ENVY H8-1445 desktop for a couple of months. I have Start8 (Start button plus boot to desktop) and ModernMix (run modern apps in windows) installed to make it bearable. UAC is set at the minimum level (I build live CDs with WinBuilder and it needs to have UAC as off as it gets).
About two weeks ago, without any apparent event that triggered it, installation programs started failing. The problem was elevation; they couldn't do it. E.g. if I downloaded a file and told the browser to run it it would fail immediately. This happens in all IE, Opera, and Chrome. If I download the file and save it then run it as administrator it works fine.
There must be a setting somewhere for this, but I sure can't find it.
I JUST bought a brand new PC a few weeks ago and it came with Windows 8. Last night I tried to load 3-4 of the programs I had gotten previously of CNET and loved.
When I went to the download screen, and clicked the green 'download' button, nothing happened. I tried 2-3 programs. I then tried to reboot and start fresh.
I have 4 user accounts set up, but I am doing this while logged in as the Admin/Main account.
I have had Windows 8 for a few weeks, and I just keep running into quirky issues. Is there any type of blocker I need to turn off or something?
On my windows 8 computer, Suddenly I can't pin programs to the taskbar.
View 9 Replies View RelatedI'm using windows 8.1 and for some reason add/remove programs is only displaying about 18 programs. This is a new laptop, and it wasn't doing this a few days ago. I've downloaded a couple other uninstallers (IObit Uninstaller and Decrapifier), but they both display the same thing.
View 3 Replies View RelatedI'm currently running WINDOWS 8.1 and would like to make a CD-R copy of a Program on the Hard-Drive.
I no longer have the Installation CD or a downloaded set-up Program, only the installed version.
Assuming making a copy is possible, how would it be done ?.
Dell Intel Core 2 Duo Processor E7500 Computer
Inspirion 545s 00
Windows 7 Home Premium 64-bit, Service Pack1
6GB Memory
750GB Hard Drive
On my current pc (stats above), I'm able to run all of the older programs I had on XP and Windows 98SE, with the exception of The Print Shop card program. I now have a new older version (LOL) installed on pc
Would I be able to run older programs on Windows 8? I have heard that Windows Pro will accept older programs and Windows 8 will not.
The programs I'm looking at are Paint Shop Pro 9 and an older Nero program. On my current Windows 7 pc, I'm able to run PSP 7, 8, and 9, and a few other oldies but goodies.
I do not like the new versions of the PSP programs, so that's why I've remained with PSP9 and older.
Is there any way to "tell" Windows (8.1) which programs are OK to run and modify the system? I get tired of saying OK every time I run one of many utilities like True Image 2013, Auslogics, CoreTemp, CPUz and the list goes on and on. I have UAC set to the lowest level short of Off. I really don't want to turn UAC Off since I keep thinking it might actually catch a bad guy sometime! I have my W7 systems UAC set the same way as Windows 8 but don't get all the annoying popups!
I was wrong - W7 UAC acts the same way as Windows 8. I had it Turned Off in W7 and turned it on to the lowest level to check but the change does not take effect until the system is rebooted. So...I'll run Windows 8 with UAC Off too unless there is a better way.
I have recently purchased and new computer with Windows 8. It's running smoothly, however I am encountering one particular problem.
My primary boot device is a 128GB SSD and obviously I want that space for the operating system install and some essential programs (photoshop, fireworks etc.).
My secondary device is a standard 1TB HDD. This is what I want to be my storage space for files, documents and non-essential programs.
The problem - Whenever I try to install a program to my second drive it comes up with the following error
"Error Writing to D:lahblahlahlah.xml. Verify that you have access to that directory"
I have check my permissions in the security tab and made sure that all the right check boxes are clicked. I have made sure to run the program as administrator and I've check to make sure that the directory is not set to 'read only'.
Where is the recently opened programs list in Windows 8.1?
View 9 Replies View RelatedI have the disks for a number of programs I have used in the past on my computers (Windows 95 - Windows 7) I shall try to download some of these to a new HP laptop using Windows 8. What success have other users of this forum had in using old programs? Which programs were successful and which died?
View 6 Replies View RelatedI installed Windows 8 on my laptop like 5 days ago, everyone worked fine and dandy there but somehow now most of my programs won't launch but i can see it in Task Manager, my DVD drive won't open when i try to eject it physically, when i try to right click and eject it in My Computer, it freezes immediately and doesn't recover so i'd have to end it via TM.
But this is what i don't understand, after i put my Laptop to sleep by pressing briefly on the power button, when i turn it on again, the DVD drive then opens after the long time i tried to open in while using Windows, i then login and the program.s that wouldn't open like Origin and iTunes would be opened after logon..
Windows Media Player also freezes when i use it to open music files and play as it is the default player, sometimes it plays the music but it won't let me pause or change volume, sometimes i won't play at all and it'd just freeze..
And sometimes when i try to restart, the system hangs and won't actually restart leaving me to hold down and press the power button to shut-down the system. I'm almost regretting upgrading to Windows 8..
It was working before today all of a sudden every time I open a pic Windows asks me what program I want to open it with, WD (which is a Western Digital Metro App that I don't know how it got installed), or Paint, or Windows Photo Viewer.
So I choose Windows Photo Viewer but everytime I open a pic it asks me the same thing ....
So I went to my program defaults but when I try to make Windows Photo Viewer the default app, it only makes 8 out of 12 extensions the same and not any more ....
I uninstalled that stupid WD metro app but it's still the same ....
Same thing with MPC-HC when I make it default nothing happens, it has 0 out of 112 extensions that it can't associate with ....
If i remove a programs folder from the programs folders in an WIM image file, then when installing the WIM using windows setup, will the program no longer exist or is there remnants of that program that I have to delete (e.g. registry details)?
And if I want to install custom programs, will it be the same process but in reverse (i.e. get all the files and folders of that program and place then in a new entry under the programs folder or is it different?
I have toshiba recovery OEM discs which I have extracted and joined the existing SWM files into a big WIM file.
I want to integrate Microsoft office 2013, WinRAR, Adobe Acrobat Xl and other programs
View 2 Replies View RelatedYesterday I was watching a video on YouTube no problems when all of a sudden it shut down and didn't want to load back up, after clicking the shortcut on the desktop a dialogue window popped up saying that 'this program isn't in this location' (or something similar) and if I wanted to delete the shortcut. Thinking nothing much of it I rebooted my machine.
After rebooting, some of my tiles were missing and the rest of the tiles had a small black 'X' on the corner, I couldn't open any of my apps and searching for them resulted in the icon popping up in the charms bar but was unable to open them. Literally 20 seconds later all of the tiles disappeared, the charms bar stopped working and the whole screen looked completely blank.
One more reboot later and I have no tiles on the main start screen, no tiles when I swipe down to all apps, no search results for control panel or task manager, the charms bar works but all I can do is access my WiFi network, volume and screen or search.
The tablet is a Dell Latitude 10 ST2.
Here's a few photos
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
I installed programs called vaultClient by SourceGear, Mumble (a chat client) on my machine, needed to do a reboot. After rebooting, the Start interface show up with all the tiles and what have you, but clicking into Desktop rendered nothing, clicking any of the program tiles, nothing. Going into Apps and trying to open programs, nothing.....I can't do anything but look at the Start interface, but when clicking on my machineName icon to Sign out, that works.
View 6 Replies View RelatedIf I upgrade to Windows 8.1, will it delete all my programs/files/etc.?
View 1 Replies View RelatedMy laptop is being replaced as it has a faulty motherboard (but still works). The new laptop will be identical.
Is there any way I can clone my hdd so that when the replacement arrives I can copy all the data onto that hdd without having to reinstall all my programs etc.
I know there are various cloning softwares available, but do they work? Are they any good? and most importantly are they idiot proof??
Any best way to achieve this data transfer to new machine.
I'm using an Asus N550JV running Windows 8.1.
Recently, whenever I restart my computer or shutdown->startup, I notice that startup programs (e.g the Logitech Application for my mouse, Google Drive sync etc) do not run unless I sign out and sign back in. I can constantly replicate this.
I'm not sure if this has to do with me disabling hibernation (I did this on day one of getting my notebook).
The problem with this situation is that I disable my touchpad because I have a wireless mouse, but on occasions where I don't have a mouse available, I can press the Asus instant-on button and I have it set to toggle the touchpad on/off function. Because the startup services aren't loading, I'm unable to use that button now and I'm stuck using my keyboard to try to manually turn it on.
Running Windows 8, the system boots into a user account without login.
The launcher seems to work, I can bring up the desktop. From the desktop I cannot launch any programs, other than a non-admin DOS window- but from there I can't launch any other non command.com EXE.
When I try and run any desktop app, the icon comes up and highlights for about 5-10 seconds, then goes back to normal. I can't even ht CTRL-ALT-DEL and run Task Manager. It just never comes up.
Logging out never gets me back to the login screen.
I can swap accounts- but the other account never gets logged in. Just waits forever (or, at least, a long time).
When I launch Metro apps, the splash comes up to the app... and that's it. I can CTRL-F4 it, and that's it.
Hitting F8 on boot doesn't do anything (no safe mode anymore?).