Apps / Software :: Replace Default Copy And Move System
Nov 25, 2013a good software to replace the default copy and move system of Win 8.
View 6 Repliesa good software to replace the default copy and move system of Win 8.
View 6 RepliesI created the system backup (bit copy) in my Win 8.1 Pro and saved it to my internal HDD.
It is possible to move it now to another drive (e.g. to NAS)?
I try to do this manually, but even though I can open the folder "WindowsImageBackup" and I see several saved files in included folders I cannot manipulate with them.
I am using Windows 8 Home Premium. This question pertains to Explorer.
In Explorer's HOME ribbon, there are icons for Move To and Copy to. There is a drop down list of destinations for each icon. Is there any way at all to clear these lists? I haven't found a way yet.
This started happening just recently & I think it was after a Windows update.
Every time I want to copy or move a file using the select location link, the copy/move window that opens is always below the task bar (or below the screen if I have task bar set to auto hide). In either case I cannot click the move or copy button before first moving the window up. It may seem like a small thing but I do this operation a lot & it is very annoying having to do that extra step.
I have got my Acer Iconia W700 and it is good.
But i have 1 problem that i am trying build a Tablet News website on Weebly and when i drag and drop text or other element in the website it is good but when i touch on the text it goes straight to the text editor instead of the bar where you can delete or move and copy the text element and i can't do it because i want to delete the text element and it is getting annoying and it happens with most elements as well.
I tried using it with my Samsung Galaxy Tab 2 7 pen to get to the bar of the element to delete/copy/move the element but it is the same.
Is there a mouse method on the Acer Iconia W700 because i think that would be better selecting without going to the text editor like the text element and goes to the bar(move/delete) elements in my website.
Weebly.com is a drap and drop website builder that is very easy to use.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
I just ran into a problem during my upgarding my laptops to win 8 pro from win 7 and also win 8
1) I have discovered that my laptop which came with win 8 which i upgraded to win 8 pro with a dvd, has had the contents of the hidden partition deleted in the upgrade process [as told to me by acer][that is i can no longer go back to factory default settings ever!].The hidden partition is going to be returned to original condition.So i would like to copy the image of that hidden partition somewhere,where i can copy it back onto the hdd hidden partition should this ever happen again for whatever reason.But not onto a dvd,either a externall hdd or usb stick if its possible.
2) I have another acer laptop which i have also upgraded,but from win 7 to win 8 pro. And it seems that the hidden partition and the factory default settings in that laptop have been untouched!! as i have just restored it back to factory condition.
But i would also like to copy the hidden partition for this one. And i also have other laptops with hidden partitions with vista and xp.
So win 8 will delete the factory settings in a hidden partition when it is an upgrade from win 8 to win 8 pro but not from win 7 ???
What are the ways to copy the hidden partition for ones i know how to remove the hdd and ones that i do not?? In a way that is easy to copy back to the hdd concerned.
I have been using Syncback SE Free for a long time now with Win7. It works well. I like the mirror function and the ability for syncback to detect small changes and allows you to view different files. When I use the mirror function in syncback, it scans the drive/folder and only copy/delete the differences leaving the rest of the files intact.
I have one main PC as my work pc, and I rotate between 2 different PC's (win 7 pro laptop and win 8 pro desktop). So I like all files on each pc to be current. Think of it as dropbox but offline with tons of data. Currently I have an external hd which I use as an intermediary between the "current" pc and the "older" pc.
After I upgraded to win 8 pro, I noticed that I can do a complete backup with syncback, but I cannot use the mirror function. Syncback does not work in deleting files either from source or target hard disk. It can detect the file changes, but unless I delete the file at the target drive, it will not copy to the target drive.
Any mirroring software which can replace syncback free which works for windows 8 pro desktop and my windows 7 pro laptop? I have tried contacting the people behind syncback (2brightsparks), and they have a knowledge based which does not tell much. It seems that windows is getting stingy with the read/write options. Following the KB discussion on syncback yields nothing in fact it is too convoluted.
I don't mind if it is a network/ethernet solution (not online storage like dropbox-but using ethernet wires) or my solution which is using an external hd as long as all my work computers are "current".
I need to replace a file in windowssystem32en-us and it gives me a deny file to be copied how can I do this so I can copy a file or replace a file. how to gain access.
View 9 Replies View RelatedI have a Toshiba (satellite) laptop and it has just been upgraded to Windows 8.1. I made recovery discs before the upgrade but would like to backup again after the upgrade so i don't have to revert to the factory set-up or refresh option as I have already had that experience and i don't want to go that route again! My laptop is only 9months old & running fine so far with no issues, i can back-up my documents etc to my flash drive but i would like to back up, 'or do you call it copying', the whole setup so if i have a problem i can re-install the whole lot as it stands from today. I have increased the system restore percentage bar to allow more restores points as another safety option.
View 7 Replies View RelatedI am using EaseUs Todo Backup Home. I relocated the installer folder's files from ssd to hd. Do I need to copy the files back before I do a system backup?
View 3 Replies View RelatedI have a laptop with an SSD and a "normal" rotating hard drive. The SSD is small (32Gb) so I want to reserve it for things that best belong on it, using the bigger (650Gb) HDD for the bulk of my storage needs.
I assumed it would be easy to move the Users folder but no, it can't, so after much faffing around I managed to move the folders individually using the Properties/Location tab, all of them that is except the Documents folder which for some reason doesn't offer the Location tab on its Properties.
This concerns me because the Documents folder is likely to grow the fastest (most of my work is text) so I really do want to get it off the SSD onto the HDD.
As a subsidiary question - if that's allowed? - if I create another user can I tell Windows to put its folders on the HDD right from the start? As there's nothing in the Users folder yet that might be a way round this problem?
I was trying to clean up my 8.1 system and encountered a folder that it won't allow me to delete or move. It is in C:users[me]appdatalocal emp and is named rarsfx4. It appears to have been used by my AV pgm., Bitdefender, at install time. When I attempt to delete it, it asks me if I want to move it to the recycle bin. I click Yes. Then it says I need to provide administrator permission to delete it. I click Continue. Then a little window pops up and quickly disappears that says '234 items recycled.' Then another window appears that says 'You require permission from xxxme to make changes to this folder' and gives me only the option to try again, which just repeats this last process. xxx is my PC name, and xxxme is my user profile name, not any user account name that shows up in Control Panel, User Accounts. (I have only one user account, which is a network one, my gmail ID.) When I check Properties, Security, for the folder, I see that System, my network user account (which is an administrator), and Administrators (xxxAdministrators) all have full control. When I click on Advanced under Security above, the owner is displayed as Administrators (xxxAdministrators).
I also tried deleting the folder using Command Prompt, Run as administrator, but get 'access denied' for every file.
My questions are what is going on here, and what can I do to remedy it?
I was recently messing around with installing Windows 8 on an external USB 3.0 HDD (NOT a flash drive) (How To Install Windows 7 On USB Flash Drive or External Hard Drive), and found website that showed a method for doing so by way of a "NT6 Fast Installer". I tried many times to get it to work and just when I was about to give up it finally succeeded. I rebooted into the external drive (unplugged my internal HDD) and it finished installing successfully. After booting/logging in for the first time I noticed that performance was near-native to what it would be if you ran it from an internal HDD. Games even ran well. But I noticed that there was only 1 partition and no System Reserved, and it appeared that the boot files were located on the C drive.
So my question is, on a regular 8 installation to an internal HDD, how can you delete System Reserved and move the boot files to the C drive? Is there any advantage in doing so (or disadvantages)? I just figured that with a C drive and a System Reserved that makes 2 primary partitions out of an available 4 being taken up, by having everthing on C you would only have 1 primary partition and 8 would still work. The steps listed at the above website are meant for 7 and Vista, but I tested them to the tee and they worked without modification on 8. I just had to flag the partition as active/bootable before booting into it for the first time, or else it would throw an error. I know alot of people think that it cant be done or is hard to do, but it can. But that's not what I'm trying to prove. It essentially amounts to being almost the same thing, if not exactly the same, as Windows To Go, except that you're installing via an unofficial method since the official installer wont allow installation to a USB HDD.
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
I wish to purchase a new laptop that has Windows 8 OEM pre-installed on a 256GB SSD and a recovery partition. I would like to move the recovery partition to an USB drive using the feature available in Windows 8 and create another partition on the SSD for a different OS (linux). I have several questions:
1. Is there any difference between a recovery USB and the recovery partition on the SSD?
2. [Answered] If I completely wipe the original Windows 8 installation can I restore my system using the USB drive?
3. [Answered] During recovery, can I chose on what partition I want to install Windows 8 or create a new partition for it (similarly to a fresh install) or is the whole thing done automatically? I want to know if the recovery process wipes the whole SSD or only the Windows partition and if my other partitions will be left intact (I can live with it overriding the bootloader).
4. If I shrink the Windows 8 partition, can I still perform the recovery? (assuming that I have enough space for the installation).
how to rebuilt user with broken system settings and keep directory structure (for scripts and non -windows friendly software) and hopefully user name.
Problem: Main user profile is broken, flat out broken. After login the screen starts flashing and it gets worse from there. I can run everything and not duplicate the error message. I always create a pristine user when I do an OS install. Administrator is OK, but it has saved me more than once to have the regular admin-type account. Since I have the nice, fluffy, running profile now I would like to learn just where is it reading these files that tell it bad things.
Another is a broken video driver (sounds were Windows Default on the working one, I told it no sounds in light of what I read) Both profiles are running the exact desktop wallpaper changer, it is working fine on the one account. I couldn't turn it off anyway on the bad account, I can't get to any of the settings windows, regedit, control panel items (that I want) are not running. Same errors as above.
I assume the calls are in the .appdata directory or perhaps the registry. I used to know how to open another user's registry in regedit but can't figure it out in Windows 8. Is there a way to tell it only to run particular services for a certain user, I can't see the services module when in the broken profile, again, same type of errors as before. Not sure which info you want on the machine or how you get it.
Computer:
Operating System Windows 8.1 Pro Professional
OS Service Pack -
DirectX 4.09.00.0904 (DirectX 9.0c)[code]....
Right now I have 250GB HDD. I want to buy a 1TB HDD. But I dont want to reinstall everything.
I want to move whole OS from old hard drive to new hard drive. Is it possible? if possible, can you plz explain me how?
Right now, my 250GB HDD has 6 partitions. I only want to move OS ( drive C) to new Hard Drive. I dont want to take backup of entire 250GB HDD !!
Metro Apps/Tiles Keep Refreshing To Default Settings?
I consider myself an advanced user, but I still overlook a lot of things and make mistakes like everyone.
Basically, Windows 8.1's Metro apps and tiles keep refreshing to default settings like it's the first time I've used them or opened them.
When I go to use Skype, it will always ask if it is allowed to use my webcam and microphone. It seems to remember the settings for a while, then forgets them.
I'm assuming this is CCleaner related, but I unchecked all of the settings that correspond to the Metro applications, and this changes nothing.
I'm unsure if I am actually deleting important information Windows needs without knowing. I usually delete logs on top of the usual things to keep my computer clean.
I have some videos I created on DVD as well as some personal audio CDs I created. I need a simple disk copy to create additional copies of them. The computer came with Win7 and a stripped down copy of Roxio, but that won't work now that I'm on Windows 8 (bad decision, but that's another story).
I am looking for a way to do these simple copies that:
is not too expensivedoesn't install bloatwareworks (reviews on most products I've looked at are horrible)does not have to do anything else, but if it does, OKworks on the Windows 8 desktop
Any solutions to doing a simple copy of video DVD (personally created, no copy protection) and audio CD that meet the above criteria?
Due to some programs I'm using, I had my UAC disabled via registry. Now, I restored my UAC in the registry by changing 0 to 1 in the key of EnableUA. Then to be sure, I changed the UAC to default. Now, I can't use the Metro Apps.
View 9 Replies View RelatedHow come Enable Large System Cache is disabled by default?, why is it disabled by default on both Windows 7 and 8? and should one enable it on these new CPUs? does it have any benefits?
View 3 Replies View RelatedWhile creating custom system image, I accidently registers the custom system image as default image when refreshing Windows 8 instead the OEM one. So, how do I unregister the custom system image and make the OEM system image as the default one?
View 3 Replies View RelatedWord had worked well in Windows 7, but now, after I moved to Windows 8.1 almost everything is messed up. Most annoying thing is the copy-paste function. When I try to copy something, it can't be copied to the clipboard and some weird cursor appears when I click where to paste. When I try to cut, the string is saved in clipboard and it works fine.
Also, when I run Word in safe mode, all the functions work fine (even copy-paste).
What should I do? I tried Office Diagnostics, but it shows 0 errors.
I am looking to change the look of my browser and i figure the time calender and apps would look nice on the left side of the toolbar. is there any way?
View 1 Replies View RelatedMy windows apps dont want to open, the store opens shows the brief case logo for a 2-3 seconds and it minimises when i click on it on it to open it again the same thing happens and all other apps dont even respond just their icon move a little on the sides to indicate they are clicked but they don't open at all.
I use windows 8 enterprise and it is activated, it happened before, one way to fix it but its annoying is to create new account and on it they work just fine, but the old one don't.
I can delete and it and recreate it but then i have to register some of my programs again. I read on the internet about that issue so my resolution is not the problem UAC is still on. I use windows defender for antivirus.
When I installed Win 8 Pro on an old laptop with Win 7 32-bit (dual boot configuration), I do not remember seeing an option for installing either the 32-bit or 64-bit version of Windows 8. My System shows I have 64-bit and I am having trouble locating video drivers for my 6 year old Toshiba Satellite laptop. I found people with a similar problem on an NVidia forum and they put together a 32-bit driver version that supposedly works. I did not mean to install the 64-bit version. Is there a way to do a reinstall, but this time select Win 8 32-bit? Is there an option for it If I just do a clean reinstall?
View 3 Replies View RelatedBought 8700 with win 8.1 on it not realizing the difference between it and the win 7 64 I use on my laptop. I run it in desktop mode. Twice I've signed on to live mail 2012 and all my email and subfolders have disappeared. Now I keep getting IE11 has stopped responding, can't find problem, must shut down. Never had any of these problems with my laptop or my old XP desktop. Any thoughts on un-installing win8.1 and installing a new Win 7 pro? Why did they stop support for XP
View 5 Replies View RelatedIs it possible to "Copy" a language pack to Office from it`s directory on C:/ Drive?
I just wonder, I got a new pc and can`t backup.
Tried uninstall and install the drivers lots of times and restored to an earlier point, no joy. Consequently I created a new user and the mouse and keyboard are working perfect.How could I use/share any programs/ applications I have installed and use in the newly creted profile?
View 1 Replies View RelatedI have a file I'm trying to move into a subdirectory under program files/windows apps.
I get an error that I don't have permissions.
So, I take ownership of the entire program files directory and all subdirectories and files under it.
So, now I am the owner of the whole directory, but I still can't move/copy the file into.
I am also the owner of the source file; and of course I'm logged under the same name as the owner.