After Safe Mode Cannot Turn Back Normal Startup
Nov 25, 2013
DVD drive is powered off, Lenovo X230, Windows 8.1 64 bit and found that in the safe mode (minimal), the problem does not exist. For trouble I decided to try other options of safe boot to have further information. After restarting in safe mode "Active directory repair"', I can not turn back to Normal Startup. I see only pure blue screen with only one button with restart and shut down, there no any key on the keyboard who work, left click not working too. And I can not access to msconfig and startup manager to change this setting.
But I have a bootable disk and I can edit registry but I do not know what do I have to do to get back Normal startup.
View 4 Replies
ADVERTISEMENT
Jan 2, 2014
My screen seems to have a grey filter overlaying it. See attached.
When i booted it in safe mode, the screen is showing the right vibrant colors. When i booted it back to normal mode, the screen is greyish but strangely the mouse is showing the correct white color.
I have googled across numerous website but none of them bring me closer to the issue. I have read the thread, Personalize Suddenly Greyed Out but this is not what i encountered. The options or buttons or selections did not grey out, it affects the screen only.
I cannot afford a system restore because i shared this laptop with my gf.
View 5 Replies
View Related
Nov 26, 2013
I recently install Left 4 Dead on my laptop and it changes my font to bold, not only in the game but all in my system, my default font is now bold.
I uninstall the game but the font was not changed. I went to Font Settings on Control Panel and make it to default, it now go backs to normal but not for all programs.
For instance, my Firefox's font was still bold, changing to default also I can't. So how do I turn all fonts back to normal? Look at image and see how my Google looks like, it's bold I want all back to normal. I think the font is Arial Bold.
View 1 Replies
View Related
May 14, 2013
I recently installed windows 8 on my dell laptop. The brightness is automatically set to higher than my normal settings whenever the PC boots up. It starts from the Blue Window 8 logo screen to the Select Your Operating System screen. I'm dual-booting windows 7 and 8. When it reaches the Enter your user password screen, it goes back to back to normal settings. (I always set Brightness to lowest possible). So basically this always happens when the PC boots up, But it auto-adjusts itself to my settings after I enter my password).
I installed the Ambient Light Sensor drivers for my laptop to fix the Device Manager yellow exclamation marks. But I disabled the Ambient Light Sensor service in Services.msc, but that didn't fix it ... Adaptive Brightness is also disabled..
View 8 Replies
View Related
Jun 26, 2014
I am trying to turn back on my Window's Defender and turn off my Norton 360.
View 3 Replies
View Related
Jun 10, 2014
I'm new to 8. Was tinkering around with WMP, and permanently hide all the menus (including the organize button)!
how do i get it back to normal, that has the list in the right pane and the library, sorted by artist -> album the rest?
View 3 Replies
View Related
Jun 2, 2014
I cannot install windows 8 in BIOS or UEFI mode.
it's getting boot and install only in EFI mode. after trying to reinstall it won't allow me to select the disk partition, as it gave me the error "
Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." i tried all the given solutions on GOogle. even i cannot recover or refresh using windows 8 environment. many times it gives me BSOD. cannot vonvert to MBR as it says it cannot be done on virtual HDD.
tried many things nothing works, need to install windows 8 after every 1 or 2weeks, many a times my BCD data gets corrupt, and windows wont start. Also tried many things to repair this, but only thing that works is reinstalling windows 8.
That gpt or MBR error was solved by selecting UEFI:CD drive. in boot options by pressing F12 after inserting the disk.
My system configuration:
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Intel(R) Pentium(R) CPU G645 @ 2.90GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 3029 Mb
Graphics Card: Intel(R) HD Graphics, -1813 Mb
Hard Drives: C: Total - 102399 MB, Free - 33011 MB; D: Total - 374009 MB, Free - 51233 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61M-DS2
Antivirus: Windows Defender, Disabled
View 1 Replies
View Related
Oct 28, 2013
I upgraded to Windows 8.1 and all has been great except one thing. When I leave the computer for about 10 minutes or so, the display turns off like it is supposed to. If I want to turn the display back on though, I find I'm unable to with the mouse, keyboard, or power button. It's like it is stuck in limbo and I have to restart the PC.
View 1 Replies
View Related
Apr 4, 2013
I had to boot into safe mode for virus removal and now all it will do is boot and start safe mode, then reboot again. It just keep doing it over and over. This is a new upgrade to a windows 7 pro OS and I am using 8 pro.
Cannot boot in normal mode. Tried to do that by going into the advanced repair and doing a normal startup, just keeps going back to safe mode and as soon as the screen starts to open it reboots.
View 1 Replies
View Related
Feb 23, 2013
Does Windows 8 have a Safe Mode and were do I find it. the reason I ask this is because I have tried going into Safe Mode in Windows 8 by hitting the F8 key so I could run my virus scanner to see if there are any virus that it may not be finding under normal mode. But when I reboot my computer and try going into safe mode in Windows 8 nothing happens.
View 9 Replies
View Related
Sep 19, 2012
I've discovered that Win 8 dumped the F8 key on reboot to enter safe mode, now it seems that you have to go through a convoluted process within Win 8 to set up boot into safe mode or alternatively through "msconfig".
What if you can't boot into Win 8, wasn't that one of the uses of safe mode?
Win 8 looks quite messed up to me and more complicated to use, maybe a little faster to reboot and more flashy, but apart from that not very convincing.
View 9 Replies
View Related
Nov 19, 2013
HP DV6 6121tx
I was trying to get AMD drivers working properly so that FIFA would stop crashing. I read somewhere that installing the latest AMD Catalyst Beta with separate Intel drivers would work. I tried that, rebooted, and now I have a black screen after the Windows splash logo, with my mouse pointer visible if I move my mouse. So clearly something went wrong with the graphics driver installation.
No problem, I'll just simply boot into safe mode, uninstall the drivers, and experiment with some other drivers.But no. F8 doesn't work, I know. Shift-F8 doesn't either. So I got my installation media, surely there would be a way to boot into safe mode with it!
Here's what I get.
There's supposed to be a 'Startup Options' button here, but for SOME reason, it's not. I have no clue what to do. I cannot fathom HOW Microsoft managed to make booting into SAFE MODE such a puzzle for an end user.
Some more background: After a similar graphics driver adventure last week, I got into safe mode (phew), tried to uninstall AMD drivers. I got an error about how this the installer cannot run in safe mode (what?!). I tweak some registry key to get it working. It failed to uninstall properly. I rebooted, and then I was absolutely unable to get OUT OF safe mode. Nothing I did changed that, each and every time Windows booted to safe mode.
I can't remember the last time I had such a bad experience with a Microsoft product. backing up files in my C: drive and simply installing regular Windows 8 over this. BUT I can't access my C: drive via Ubuntu because Windows has LOCKED that partition because of it's fast-boot nonsense.
View 9 Replies
View Related
Mar 27, 2014
I am using ASUS (S550CB) and given installed win 8 at purchase time so, no cd,key&backup provided to me. And unfortunately i also didn't make the backup. And now a BCDBoot file is missing as a result at boot time a blue screen come.
But now i pressed the F9 at boot time so, a screen open in which option's are available to open windows(I think it is a safe mode) or to troubleshoot(for image recovery back up), I select image and it is saying that there is no recovery image in this computer add a cd/dvd for backup/recovery image.
So, my question is can i open the openwindows(Safe Mode)(pressing F9) and take a back up in my USB and then again to recover image. Is that possible because my BCD/Boot/ file is missing?
View 9 Replies
View Related
Feb 11, 2014
How I might create a bootable USB for our ASUS T100? Since it has no CD drive, it obviously came with windows installed, so I have no product key or ISO (whatever that is). I have also had much difficulty trying to get it to boot in safe mode...
View 2 Replies
View Related
Sep 20, 2013
With Nero 2014 I was forced to install it in safe mode (I got strange error "1158" otherwise). However when the installation reached MSI files, it was unable to continue.
This REG file below enables MSI installer in Safe Mode and Safe Mode with Networking.
Reboot is required after REG is imported:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootMinimalmsiserver]
@="Service"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootNetworkmsiserver]
@="Service"
View 9 Replies
View Related
Jan 6, 2014
I can't boot into Windows 8.1 at all or even safe mode..I have tried startup repair etc etc ....I also tried the bcdedit trick to boot directly into Safe mode with the command prompt option no dice either..I would rather not do a refresh or reset pc..Matter of fact I have tried both options and even with a clean 8.1 disk I can't ....It gives me the error message remove cd or media and restart no matter whether i have the disk on or not. i think it might be a problem with the boot or something or its booting to the wrong device perhaps a USB ? i do have bitlocker on the drives and when i got to do a startup repair it asks for my key and i obv have it on other media which is my usb which won't read the key from it anymore..
View 8 Replies
View Related
Jan 21, 2014
I have a friend who has tasked me with removing the dreaded "Interpol" scareware virus from his Windows 8 laptop. Sadly, this means he can't boot into Windows 8, as the virus just locks him out. How can I boot into Safe Mode, so I can run the "Power Eraser" tool from Norton (handy tip!) to remove it?
If this can't be done, how can I tell the PC to boot from the DVD-Rom drive?
View 9 Replies
View Related
Mar 17, 2013
Is the correct way to get to safe mode with networking to :
Change pc settings>general>troubleshoot>startup>restart......?
When I clicked on restart, a red warning occurred too fast for me to read it.
Maybe I made an error in the procedure as I was doing it from memory.
View 3 Replies
View Related
Jan 18, 2013
Using Windows 8 Pro.I have tried all the various permutations to get into safe mode (ms config, start up options etc.).
This is what happens: I use MS Config or one of the other ways (tried them all!) to get into safe mode. The computer seems to be booting into safe mode when I get a blue screen (not BSOD) which pops up and very quickly disappears, and then the computer reboots normally (into Windows 8). The screen says something like 'Windows has encountered a problem and needs to restart'.
View 9 Replies
View Related
Mar 16, 2014
I am unable to get out of safe mode in Windows 8.1. I have tried everything, but it keeps asking me for a password when I only have a PIN.
View 4 Replies
View Related
Sep 11, 2013
SVF1521P2EB from PC world.Trying to use a recovery program I always use for all my laptops and desktops and have created a bootable USB Stick and also a DVD bootable disk. Both disk and usb work on all other systems but this Sony Laptop.
Have USB stick in the usb2 port not the usb3 port due to compatibility issues with backup/restore on usb3. The stick is a usb2. I have gone into bios and set usb and also tried dvd as first boot device. Will not boot.
Have tried the assist button on the laptop and the restore (boot from dvd/usb media) also does not work, as stated these both work on other laptops and desktops.
I have tried to find the boot option menu or safe mode startup. I have tried this by pressing various buttons each time on boot usually F2, Del, esc, F12, F10 on other systems and also F8 which does not appear to enable the laptop to start with a manual boot.
All I seem to achieve is the Vaio screen and straight to Windows8.
I do see the sony recognise the usb as the green light is flashing, no message of boot failure.
1) What is the boot option at startup to manually select a boot device.
2) How to boot into safe mode.
3) How to possibly rid the boot up screen displaying the VAIO logo.
4) Get the Sony to recognise either the bottable dvd or usb to backup the system without using the sony or built in miscrosoft bootup.
Final result should be a full image backup of the hard drive ona an extarnal harddrive/usb stick for future restoration.
View 9 Replies
View Related
Dec 11, 2013
Win 8 Pro..I am trying to fix an error that is causing my desktop to randomly reboot.
I wanted to run chkdsk from safe mode, however, tapping f8 doesn't work for me.
Tried to restore a backup and paragon merged all the drives into one file and says the structure is different and I may lose data.
Win 8 will not let me stop chkdsk with any key press.
View 6 Replies
View Related
Aug 7, 2013
I tried to reboot into Safemode via msconfig>startup>minimal boot
Not only did Windows not reboot in safemode, but now, after the Windows splash screen, I get stuck in a black screen with no cursor.
Troubleshooting steps thus far:
Automatic Windows repair via the Windows 8 setup
Windows Restore
Shift+F8 which gets you to Win 8 boot manager (but no option for safemode)
I'm pretty disappointed that something as basic as restarting in Safemode is causing this problem.
bcdedit /deletevalue {default} safebooot this cmd boots me back into Windows, but it does not explain why the problem occurred in the first place.
View 9 Replies
View Related
Aug 17, 2014
Win 8.1 Pro x64. Got to the safe mode screen with the nine choices for start up method. 5 or F5 is supposed to restart with networking, but the connection isn't happening. Attempts to make it bring message that I have to start Windows normally.
View 6 Replies
View Related
Nov 10, 2012
I have protected my pc at work and locked it down so that no employee can access windows 8. Only problem is that yesterday I accidently pressed reset button midway whilst windows was loading and it brought up the safe mode screen. Since I have a full backup image of my drive, I can always reload my preferred setup whenever I want via usb install, so I don't want windows to run into safe mode at all - EVEN IF IT MEANS I COULD LOSE DATA!
My question is How can I disable this safemode feature from starting at all if windows crashes?
View 2 Replies
View Related
Sep 15, 2014
I have Lenovo laptop with Windows 8.1. I enabled safemode and restarted my laptop.on Login screen, it asks me to enter microsoft account password and my wifi is disabled. When i enter the password, it says password is incorrect. How do I login?
View 9 Replies
View Related
Mar 27, 2013
This seems like another thing that Microsoft has made much more difficult instead of easier to do.
View 4 Replies
View Related
Jul 17, 2013
f5 doesn't work on restart .. .
View 9 Replies
View Related
Jan 9, 2014
My win 8.1 pc died after the fan control was accidentally disengaged. I replaced the cpu and the video card while I was at it, going from nvidea to amd.
The pc booted up ok, I installed the amd drivers, rebooted. Then I uninstalled all the nvidea software.
Now when I boot, there is some kind of loop going on after the initial blue window sequence. The screen is black but some screen icons flicker repeatedly and there is a mouse cursor.
I cannot get it to boot in safe mode to try to repair this. I made a recovery disk with my other 8.1 machine but it doesn't give me startup settings. The command line from the recovery disk also seems unable to set any safe mode flag.
View 3 Replies
View Related
Aug 18, 2012
how to boot into safe mode in this final RTM or Msdn version of win 8. I know that in the release preview version of win 8 you had to manually activate safe mode through command prompt...is this still the case in this version of win 8?
View 9 Replies
View Related
Feb 2, 2013
I cant log in, into my account, I was trying to customize my windows 8 themes, folder, appearance .etc
I watch a vid in youtube were it showed me to change a file named Shared32.dll
I am sure it was this file that cause it to kinda mess up... Icant boot safe mode because of this...
When I turn the computer on it goes to my log in and password title... but I try to log in , and it does nothing....It shows this "The User Profile Service failed the logon. User profile cannot be loaded". I tried to boot in safe mode but it doesn't show nothing ...
I cannot log in... so basically I am logged out forever...
View 9 Replies
View Related
