Wireless Network Flakey After Re-install?
Feb 12, 2013
I re-installed Windows 7 onto a new SSD and have issues with my wireless connectivity.I have a ralink 802.11n wireless lan card with 3.0.2.0 driver from 19/6/2009. Device manager doesn't seem to show me the model number.I use usenet so can normally max out my broadband connection, but what i'm seeing is my computer struggling to reach the full down load speed and failing to maintain a constant speed sometimes dropping out completely for up to a minute. I have a VPN set up so can normally get round any ISP traffic shaping.I also struggle to watch you tube video at 480p on my desktop but can stream them at 1080p on my lap top from the same room.I've tried turning off the VPN and firewall on my desktop to rule them out but it doesn't seem to have an effect.
View 2 Replies
ADVERTISEMENT
May 16, 2011
I have a canon printer (couple years old) and a Brothers printers connected to a computer with Vista 32bit. I just purchased a laptop that has windows 7 64bit. I can connect via wireless network to my Vista computer just fine. I was able to connect to and install the brother printer but when I try to install the canon printer I get a message something like this "Cant find INI file, will look in windows update" after a while it comes back and says It can find INI file. Probably it is because my Vista is 32 bit and my laptop Windows 7 64bit. But I did not have this problem with my brother printer. How do I install the canon printer?
View 7 Replies
View Related
Oct 19, 2012
when i install azurewavewireless on my Eee PC 1015cx, it is showing that your device is ejected or unplugged
View 1 Replies
View Related
Oct 15, 2012
I have just installed Windows 7 onto my Dell Inspiron 6400 laptop. My laptop now detects a number of wireless networks in the vicinity but not my own. It is not a problem with my router because other laptops can pick up the connection no problem. I have Googled this problem and see a lot on issues with Windows 7 and picking up wireless signals. But I haven't seen any threads which deal specifically with the situation where only one wireless network cannot be detected.
View 3 Replies
View Related
Oct 19, 2012
how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies
View Related
Feb 10, 2013
how come can't get signal internet in my houese althogh have a wifi in theh building my computer is dell kind? what need to do or something.
View 3 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
May 19, 2012
How to off a pc over a wireless network
View 3 Replies
View Related
Mar 28, 2011
I got a brand new HP with Windows 7 and it will not connect to my network. It sees it and I have another laptop connected to it as well as a desktop hardwired to it. Like I said, this thing is brand new.
View 13 Replies
View Related
Mar 31, 2011
as of today i am not able to connect to my home network it used to work perfectly before but now when i try to connect it says unidentified network no internet accesit does work on all the other laptops herei also can conect to my neighbours wireless internet fine and when i plug the cabel in its also workingany ideas on how to fix this (not so good with computers so try to be gentel) ?
View 3 Replies
View Related
Mar 10, 2012
I would like to know how I can disable and reenable the wireless network from within Windows 7, without having to get up and hit the button on the modem. I tried going to network and sharing\network map and disabling there, but it had no effect on the wireless connections.also, I can't see the wireless connection at all in the network map. I can see my computer and my wifes, but not the kids xbox (which is whats using the wireless)
View 5 Replies
View Related
Oct 14, 2009
im running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
View 2 Replies
View Related
Aug 17, 2012
I'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies
View Related
Oct 1, 2010
With my netbook Acer Aspire One 521 I have previously connected to both home and work wireless networks with no problems, however the work network no longer appears in the 'available connections' list. I get a variety of available connections from the local area (more than any other computer) but not the specific router I am looking for & sat next to!I can still connect at home no problems with the netbook (i.e the wireless adaptor is functional) and with my laptop I have no problems at work, nor do any of my colleagues - so the router is functioning correctly.I have tried:- restarting both netbook & router- checked the router is set to mixed (b&g signal type)- checked the wireless connections list for duplicate entries and tried deleting the saved previous entry for the work network- using a system restore point from when I could connect to the networkNo new software, antivirus/firewall etc.. have been installed since it has been working as I got all that up and running at home prior to taking it in to work.Laptop has Windows 7 Home Premium & netbook Windows 7 starter.
View 1 Replies
View Related
Mar 10, 2011
On 2 different laptops, one running professional, the other running Home Media, the computer tries to connect to my home network twice. The most frequent example is when I try to connect wirelessly, in network connections I will see my network named two time. "Connected to Network, Network1" When this happens I can not connect to the internet. I AM connected to the network and can see other PC's in the network. If I disable the device and re-enable it, this usually solves the issue.
View 1 Replies
View Related
May 5, 2011
I can see the wireless connection on the laptop but it won�t connect.this networks no needed user name and pass to connect.my laptop is vostro 1015 os: windows 7 ultimate.
View 2 Replies
View Related
Jun 30, 2011
I cant connect to my wireless network because it says no connections are available and theres a red X over an icon that looks like a computer
View 2 Replies
View Related
Aug 25, 2011
I have 3 computers all running 64bit Windows Home premium all have 802.11n cards. 2 have no problem connecting to the wireless network the 3rd can see the network but won't connect or has the dreaded yellow exclamation mark with limited connectivity.
This seems to be a windows issue but not sure. When I look at the wireless profile in windows it says the security is WEP but the router is set up as WPA-2. I have tried changing the setting in Windows to WPA-2 but that then generates another error in the network discovery window saying the settings are not correct or something to that effect.
1) I have reinstalled the driver didn't work.
2) I have removed the security altogether didn't work.
3) reset the router didn't work (Although as stated earlier the other 2 computers connect with no problems)
4) Deleted wireless profile and started again didn't work.
The following worked untill I restarted the computer but would not after that even if I applied the same steps.
1) Assigned a static IP - This worked but once I restarted the computer it would no longer connect. Tired different IP address from 192.168.1-149. No joy
2)Copied the network profile from both the other machines same result as #1.
View 2 Replies
View Related
Sep 25, 2011
Prior to Saturday morning, my computer was able to detect the router and connect to the internet. However, as of yesterday, my computer is no longer able to see any wireless networks.My dad did change the frequency of the router yesterday, but all the other PC's in the house are able to connect again - except for mine. I've tried rebooting the livebox, rebooting my PC, pressing the wi-fi button, changing my adapter's usb slot and also reinstalling my adapter's drivers. None of these have made a difference.
View 3 Replies
View Related
Nov 10, 2011
I have just set up a wireless network, and my phone (android) can connect to it fine with the correct wep key, but my laptop (windows 7) cannot. it sees the network but when I try to connect it does not ask for a wep key, it just tells me it cannot connect. I have tried going into the 'network and sharing center' and connecting manually but no dice.
View 1 Replies
View Related
Mar 27, 2012
I have two PCs sitting side by side. They are both served by the same Linksys wireless router. One has a Linksys internal wireless adapter that does not recognize the wireless signal that the PC next to it is now receiving. Both PCs got the signal last week and worked fine before I installed windows 7 to the one that now cannot recognize my wireless network signal. That PC shows two old wireless network names that no longer exist, but it does not show the new wireless network.I have tried to go through the Control Panel to > Network and Internet to create the new Network name or get the adapter to sense the new network. But, no luck.What am I doing wrong? My Windows 7 install seems to have creamed my wireless network setup on the PC that will not now pick up the wireless signal.
View 9 Replies
View Related
Jul 25, 2012
I want to set up a Hot spot for my iPad on my wired internet at work. I have followed all of the steps to set up my ad hoc network but when i hit "NEXT" to actually set up the network it simply says "WINDOWS CANNOT SET UP "network name" ....Am i missing something?
View 2 Replies
View Related
Aug 30, 2012
I have the problem since the day before yesterday, the problem is, sometimes, I can connect to the interent, and a few mins later, the connection was lost, and a few seconds later, the connection is back. How do I fix it?
View 1 Replies
View Related
Sep 22, 2012
I have two wireless networks using two different routers. I can connect easily to both networks from five of my other computers, some that use XP, one with Vista and one with Windows 7. I have another AIO computer using Windows 7 that will only connect to one of the networks although both the networks appear on the list of available networks and the signal strength indicates excellent on the network that won't connect. I disconnect the network that I can access, try to connect to the other but I get the advice that the computer cannot connect. I have typed in the correct codes, do everything as on other computers but it just won't connect on this one. After a few seconds the computer automatically connects to the previous network.
View 8 Replies
View Related
Oct 28, 2012
I have an Acer Aspire v5-571 running Windows 7 Home Premium 64 bit, and I've been running into trouble connecting to my home's wireless network for the past couple days. It just says that my laptop is unable to connect. I've tried everything I can think of; I've reinstalled and updated all drivers from the Acer website, done system restores from weeks ago, installed all Windows updates, and I've even wiped my PC and reinstalled windows.
View 3 Replies
View Related
Jan 15, 2013
I have a new Netgear WNDA4100 (wireless USB) and the install program can not find the WNDA4100, However, Windows 7 finds it and installs it. I can not get the Netgear Install process to complete. Cancelling that results in a disabled network device that will not enable. AKAMAI was installed on my machine and after removing that magically the item "manage wireless networks" re appeared on the Network and Sharing Center Page - AKAMAI installed precluded that from being there! However, clicking it does nothing - brings up an empty panel and when one hits "add", you get a network error. I did edit the registry manually and removed anything and everything to do with AKAMAI and it was all over the place. Doing that takes a little time. There must be some AKAMAI driver or something in the way of this all working.
Configuration:
Windows 7 x64 bit
ASUS P9X79 Pro 32 Gig 4 TB I gig ATI Video Card.
View 5 Replies
View Related
Oct 15, 2009
I have just installed Windows 7 on my desktop computer, but i am unable to connect to my wireless network.
View 9 Replies
View Related
Oct 22, 2009
I'm trying (desperately) to set up my network on Windows 7, but have hit a bump in that it just cannot find my network. I checked Device Manager to see if the card was found - it was with a troubleshoot exclamation point on it.I removed the card, used the installation disc and am not able to get very far. After the install (after which nothing happens), I click on the Belkin Wireless Networking Utility icon on the desktop and it says "missing shortcut: searching for Belkinwcui.exe", after which I get a window saying "The item Belkinwcui.exe that this shortcut refers to has been changed of moved, so this shortcut will no longer work properly". That exe file isn't anywhere in my computer, searching through Explorer. In fact, in the Belkin install folder (Program Files (x86) -> Belkin ->FSD8001v1...) there just looks like maybe a driver (AegisE5.dll) and an application (AegisI5) that doesn't run. I guess is to take my PC upstairs and line it into my modem/base station directly, but I'd rather not move it.
View 9 Replies
View Related
Nov 13, 2009
Running Windows 7 Home Premium, I've experienced this issue about five times in the span of two weeks.
When my wireless connection isn't found, sometimes Windows is unresponsive when clicking on the wireless icon near my system clock. It shows either the empty bars with a yellow indicator or the empty bars with a red x. When I try to click and bring up the list of available networks, nothing happens. Even right-clicking doesn't do anything.
Explorer has given an error and needed to shut down three of the five times this error has happened.
Any idea what could be causing this to happen?
View 1 Replies
View Related
Nov 13, 2011
I have previously shared video over windows 7 homegroup with a WIRED connection to wireless devices such as a laptop (win 7 also) and ps3. recently however, I got a wireless card and moved my desktop making all devices wireless. now i cannot see any other devices in the network, nor connect to a homegroup. the problem seems to go away when i am hardwired to the router. on a sidenote, i think i remember noticing when my desktop was still hardwired, that i could share only one way -> from desktop to wireless laptop, but for some reason not from laptop to desktop. not sure though, i never really had a reason to share from the laptop to desktop. one last thing, i could view the ps3 as an "unidentified device" from the desktop and laptop in the media sharing options (could tell from mac address) but they would not show up in the ps
View 4 Replies
View Related
