With my netbook Acer Aspire One 521 I have previously connected to both home and work wireless networks with no problems, however the work network no longer appears in the 'available connections' list. I get a variety of available connections from the local area (more than any other computer) but not the specific router I am looking for & sat next to!I can still connect at home no problems with the netbook (i.e the wireless adaptor is functional) and with my laptop I have no problems at work, nor do any of my colleagues - so the router is functioning correctly.I have tried:- restarting both netbook & router- checked the router is set to mixed (b&g signal type)- checked the wireless connections list for duplicate entries and tried deleting the saved previous entry for the work network- using a system restore point from when I could connect to the networkNo new software, antivirus/firewall etc.. have been installed since it has been working as I got all that up and running at home prior to taking it in to work.Laptop has Windows 7 Home Premium & netbook Windows 7 starter.
I have just installed Windows 7 onto my Dell Inspiron 6400 laptop. My laptop now detects a number of wireless networks in the vicinity but not my own. It is not a problem with my router because other laptops can pick up the connection no problem. I have Googled this problem and see a lot on issues with Windows 7 and picking up wireless signals. But I haven't seen any threads which deal specifically with the situation where only one wireless network cannot be detected.
I keep a router on all the time but I would love for it to be able to enable and disable WIRELESS at specific times -- for example when I'm away. I can access a Virtual server as it is "Lan" connected via a wired connection -- I need to access this remotely.
I only need wireless when there are people in the house.
I'm looking to block a specific network both wired and wirelessly and wondering if there is a way to do this. I spend to much time on the internet when at home. I can now lock the computers so that during specific times I can't access the home network. HOWEVER I would like to configure one laptop computer so that it can't hook up to the home network at all. Not being able to connect with the network either hard wire or wirelessly. I want to be able to take that computer to other locations though and be able to hook up wirelessly to them. So in other words I couldn't connect to the home network but can connect to other networks.
On the laptop, i now want to share a folder with the desktop, but only for the desktop, not for the whole homegroup, nor the whole network.They are both in the same homegroup, as well as some other computers.
As the accounts are the same I added the user 'alex' in the advanced sharing-options with full control. But it ditn't work, so I googled and also added full control for the user alex in the security options. But if I want to acces the folder from the desktop, I still get "no permissions". I, resp the user alex have/has admin-rights on both machines.Did I miss something?
I noticed that in the advanced settings of both sharing and security I can always just choose the local machine as a "location"... got this something to do with my problem?
How can I share a folder to a specific pc on a network instead of sharing it to anyone that's inside the same network? I'm on windows 7 64 ultimate and the other pc is using xp 32. Is this possible?
I just built a Jerry-rigged light weight storage computer so I don't have to leave my dev/game comp/volcano on all the time anymore. I also bought a laptop recently as well. What I'd like to do is make the data (on two logical drives to be specific) completely accessible with full privileges to the laptop and this main PC however there are other users on the network that I don't want to share everything with (but still some).I can use PC Anywhere for some things but the end result I'm looking for is a handy couple of links on my desktop to the two raid drives and carry on as though they were still on my comp (and laptop now too), but also not include all users at the same time. (but also have the option to set up sharing for the folders they need access in too)Is this within the capacity of Windows 7? All computers have Win 7 and belong to the same home group.
I do a lot of wifi hotspot testing over Teamviewer. When the hotspot doesn't work I lose the Teamviewer connection. Is there any way to make Windows connect to a specific network after about 60 seconds or so?
If I can choose the specific wifi network to make Windows to connect to after a set amount of time my life would be much easier!
I have main PC [office_PC]. On that PC is basically everything. music, pics, videos etc. It is the primary computer but I also have a laptop and a tablet that access that data too. I need/want full access to everything on the office-PC read/write. no problem easily done and I have had no issues currently until today. (64 bit win 7 system)
My daughter saved up and purchased a netbook [Morgan-Netbook] (OS:win 7 starter). I got her on the network and when connected it asked about homegroup so I said yes and now I see her and she sees me. BUT she has full read/write access to everything on the PC. I can access everything I would expect via the homegroup but then under the "network" icon I can see all my shared folders and she has way more access.
I would like her to have read access to pics, videos and specific folders but not necessarily everything else. I have tried adding her as a user in the sharing permissions but my Office PC only wants to see Location as "office-PC" so I cannot choose her from a list to restrict her access specifically. If I limit the access globally then I lose it for me as well. How do I limit access to just her so that she can see the folders we want but she only has READ access?
i have multiple family members in the household, along with two Windows 7 desktops and three Windows 7 laptops. All pc's are on the same workgroup with file and folder sharing working faultlessly - we do not use Homegroups.I have a large amount of important data on my desktop that serves as a data backup for all work I do on my laptop. On top of this it contains a large amount of media files that get shared to all pc's too. All communication is done over the network. However, as the other family members are far less tech savvy, shall we say, than I, I am growing concerned with how easy it would be for someone else to access my laptop backup work, as it is all business related, and do something disastrous to it.I would like to have it so that my laptop is the only machine allowed to access this backup data from my desktop. The rest of the shared folders on this desktop would have to remain accessible to 'everyone'.
In one particular network drive I cannot open any PDFs.
* PPT - opens fine * JPG/TIFF/etc - opens fine * DOC - opens fine * XLS - opens fine * ACCDB - opens fine * PDF - Acrobat Reader opens and then I get a pop-up "Error: Access denied."
To open any PDF I have to drag it from the network folder onto my desktop and open it from there. I can open PDFs from any OTHER network folder; it's just one specific path and subdirectories thereof where they won't open. Doesn't matter which office computer I use, I get the same error anywhere. I have R/RX/W/M (everything but full control) on the network folder. Same permissions as everyone else in my office.
I have: * Reinstalled Acrobat reader (no luck). * Disabled offline files (no luck because I didn't even know what that feature was for and never used it.) * Double-checked permissions on the directory.
I do a lot of wifi hotspot testing over Teamviewer. When the hotspot doesn't work I lose the Teamviewer connection. Is there any way to make Windows connect to a specific network after about 60 seconds or so?If I can choose the specific wifi network to make Windows to connect to after a set amount of time my life would be much easier!
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
I got a brand new HP with Windows 7 and it will not connect to my network. It sees it and I have another laptop connected to it as well as a desktop hardwired to it. Like I said, this thing is brand new.
as of today i am not able to connect to my home network it used to work perfectly before but now when i try to connect it says unidentified network no internet accesit does work on all the other laptops herei also can conect to my neighbours wireless internet fine and when i plug the cabel in its also workingany ideas on how to fix this (not so good with computers so try to be gentel) ?
I would like to know how I can disable and reenable the wireless network from within Windows 7, without having to get up and hit the button on the modem. I tried going to network and sharing\network map and disabling there, but it had no effect on the wireless connections.also, I can't see the wireless connection at all in the network map. I can see my computer and my wifes, but not the kids xbox (which is whats using the wireless)
im running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
I'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
On 2 different laptops, one running professional, the other running Home Media, the computer tries to connect to my home network twice. The most frequent example is when I try to connect wirelessly, in network connections I will see my network named two time. "Connected to Network, Network1" When this happens I can not connect to the internet. I AM connected to the network and can see other PC's in the network. If I disable the device and re-enable it, this usually solves the issue.
I can see the wireless connection on the laptop but it won�t connect.this networks no needed user name and pass to connect.my laptop is vostro 1015 os: windows 7 ultimate.
I have 3 computers all running 64bit Windows Home premium all have 802.11n cards. 2 have no problem connecting to the wireless network the 3rd can see the network but won't connect or has the dreaded yellow exclamation mark with limited connectivity.
This seems to be a windows issue but not sure. When I look at the wireless profile in windows it says the security is WEP but the router is set up as WPA-2. I have tried changing the setting in Windows to WPA-2 but that then generates another error in the network discovery window saying the settings are not correct or something to that effect.
1) I have reinstalled the driver didn't work.
2) I have removed the security altogether didn't work.
3) reset the router didn't work (Although as stated earlier the other 2 computers connect with no problems)
4) Deleted wireless profile and started again didn't work.
The following worked untill I restarted the computer but would not after that even if I applied the same steps.
1) Assigned a static IP - This worked but once I restarted the computer it would no longer connect. Tired different IP address from 192.168.1-149. No joy 2)Copied the network profile from both the other machines same result as #1.
Prior to Saturday morning, my computer was able to detect the router and connect to the internet. However, as of yesterday, my computer is no longer able to see any wireless networks.My dad did change the frequency of the router yesterday, but all the other PC's in the house are able to connect again - except for mine. I've tried rebooting the livebox, rebooting my PC, pressing the wi-fi button, changing my adapter's usb slot and also reinstalling my adapter's drivers. None of these have made a difference.
I have just set up a wireless network, and my phone (android) can connect to it fine with the correct wep key, but my laptop (windows 7) cannot. it sees the network but when I try to connect it does not ask for a wep key, it just tells me it cannot connect. I have tried going into the 'network and sharing center' and connecting manually but no dice.
I have two PCs sitting side by side. They are both served by the same Linksys wireless router. One has a Linksys internal wireless adapter that does not recognize the wireless signal that the PC next to it is now receiving. Both PCs got the signal last week and worked fine before I installed windows 7 to the one that now cannot recognize my wireless network signal. That PC shows two old wireless network names that no longer exist, but it does not show the new wireless network.I have tried to go through the Control Panel to > Network and Internet to create the new Network name or get the adapter to sense the new network. But, no luck.What am I doing wrong? My Windows 7 install seems to have creamed my wireless network setup on the PC that will not now pick up the wireless signal.
I want to set up a Hot spot for my iPad on my wired internet at work. I have followed all of the steps to set up my ad hoc network but when i hit "NEXT" to actually set up the network it simply says "WINDOWS CANNOT SET UP "network name" ....Am i missing something?
I have the problem since the day before yesterday, the problem is, sometimes, I can connect to the interent, and a few mins later, the connection was lost, and a few seconds later, the connection is back. How do I fix it?
