I have four computer networked all using Win 7 Pro or Ultimate. I set up the network as prompted and set th user name and password. All computers are new to newer Dell running 64bit. Went to setup my HP Media Smart 6TB Server and everything just fine. After all setup everything worked off-line until I wanted to access the server. A Windows Security window opens requesting Network Password and User Name to connect to the HP Server. Well nothing I input does any good ALL my entries are rejected.
This is a total f.. k up as I know what I used for the main network and what I used for the HP Server but neither work. I have tried about everything I can think of and am still locked out. All else fails complete rest and reboot but just wondering if same problem someone else might have seen for answer.
How to set up a User name and password on a Windows 7 pc so that I can access it on a network. I have shared the whole drive and turned on full access to all users.
This problem has been driving me up the wall, so I hope you fine folks can help me out with it .
I have a network storage device with several network folders and each of them are passworded for added security (in case someone manages to connect to my wifi). When I try and access them in any application or Windows Explorer, I am often (but not always) prompted to re-enter the username and password. This happens even though I tick the box to remember these details.
This is on an almost new install and I am completely stuck. Any thoughts?
I have a dell inspiron with Windows 7 that I got from Walmart for christmas. It came with a walmart adminstrative account, a guest account, and another user account. I Changed the administrator username And password, kept the guest one, And deleted the third account--- all through the Walmart admin account. When I restarted my computer however, both the walmart admin And guest account were gone and only the third account with a required password (which I do not know) and a blank user account that requires a password remained.
There is no open guest account. I Tried to use the previous walmart username password And the new one I created and neither work. Now I am locked out of my own laptop. I tried booting in safe mode but I still needed the aforementioned password..perhaps I did it incorrectly?
I would like to solve this without having to reinstall windows 7 os (but would like to know how to do that just in case). Let me know if any other information is needed in your assessment.
Alright I recently had to factory restore my gateway laptop which had come with a free windows 7 offer. So since i just restored the computer I figured now was a great time to Upgrade the computer. After it supposedly installed My computer restarted with the option of windows setup or vista so i went with Windows Setup Now I'm at a Log on screen with no Set Password or Username. I never got prompted to make one I first tried my Vista Username and password; nothing.
I have subscriptions to several paid websites. One of them does not save username and password. All the other sites save this information, but this is the only one that doesn't. I don't think it's the site. I wonder if it has something to do with my Kaspersky security softwareI use this particular site very often during the day. My old computer with Vista software always saved this information at this site.
Im trying to activate the administrator account, which requires administrative access however when trying to do a Run As on cmd It says "to continue, type and administrator password, and then click yes. Though there is no username and password prompt box appearing so all i can do is click "no".
I had a similar issue where my user name all of a sudden requires a password...i have an ultrabook so i don't have a disc drive. I attempted to resolve the issue by resetting the user password through DOS however it says that the password is blank and it cant be reset?
Long time XP user and I just starting using Windows 7 beta. I really like it so far. Except there's a few things I can't figure out.
I'm trying to connect to my own Wifi Network and it has WEP encryption (I know I should use WPA but for now, let's say i'm stuck with WEP), Windows 7 keeps prompting me for a user name, password after I already entire my WEP key. WHY??? XP never asked me for that. I tried the admin password for my router, didn't work. What is with this new "User name, password" requirement?
Please help. It's really frustrating. The only way around it is to manually add network. There must be something I'm doing something wrong.
I did a factory reset on my computer, when it restarted and came to the login screen it asked for a username and password but it wouldn't accept any that I put in.
I landed here because of a weird issue with my recent upgrade. Once my vista to 7 upgrade was complete I was brought to the user account log on page. One problem. The only account listed is one called "other user" that I never created on vista or 7. Further more it's requiring a user name and password. I had two accounts on vista that don't even exist on 7. I never had a password to any account. I now have a fresh copy of 7 that I can't log on to. Any thoughts?
I've got a folder shared to specific user on my Windows 7 laptop.When i try to access that folder over lan, from my Vista laptop, it doesn't ask me for user&pass, but just gives "Access denied" error message.If it's set as shared to everyone, then i can access it just fine. But i want it to be accessible only after password protection over lan. Both laptops are set to "WORKGROUP" and here are the network settings for the windows 7 one
Network Discovery: ON File and printer sharing: ON Public Folder Sharing: OFF File sharing connections: Enable 40 and 56 bit encryption as well Password protection sharing: ON HomeGroup connections: Use user accounts and passwrods to connect to other computers
I have a file sharing server and about 10 client computers that access files on this server.
What i would like to have is when each client computer wants to access any of the files on the server that they are prompted with a usernamepassword dialog.
I do not want to create each user on server if i dont have to. The server is Windows 7 Pro 64Bit 6 of the client computer are Windows 7 Pro 64Bit 4 of the client computers are XP Pro
We moved our offices from one location to another over the weekend. New ISP but everything else is the same.Have a peer-to-peer network with one pc (Windows 7 Professional) acting as the file server. Everyone now has access to internet and we can all "see" each other.For some reason now when we want to connect to Public Folders on our "file server" it is asking for login credentials such as username and password. I have it set to not require a password since we have a mixed environment.It has always worked in the past and I am not sure why it would be requiring that now. I had read somewhere to try and setup an admin username and password that was the same for both computers. I tried that and it was still unsuccessful (Although I still have it set to not require a password).
I just applied to college and i am trying to acess their website to log on and get started going to school. When i go to log onto the site windows security pops up and asks me for my username and password but i dont know either one of these and i really need to acess this site
I connected win xp with Windows 7 before and it probably work . now i've changed my win xp and connected it again . now when I want to logging in win 7 it doesn't have any problem but when i want to logging in win xp it show me a windows that says enter your user name and password . I have define a user and pass for win xp and tried it again but it doesn't log in .
The storage path for Outlook XP data files is :UsersUsernameAppDataLocalMicrosoftOutlookOutlook.pst which does not appear to work with respect to useername and password storage.Just wondered if changing the path to:UsersUsernameAppDataRoamingMicrosoftOutlookOutlook.pst would create a situation where the outlook username and password were saved on the ISP's server.
I am trying to install Windows 7 enterprise. When it gets to the step to enter the computer name and usually at that same step you setup the username. This installation does not have that step and when I click next it finishes the install reboots and brings me to the login screen. I can log in because there is no username or password set.
my previous pc running on win 7 when i type \server it prompts me for a username and a password and now i bought a laptop same OS win 7 when i type \server it does ask for a username and a password but it view all the folders on the \server the problem is i can't open it.
when i insert the linecable in my laptop its ask me tht isp username and the password, what is that and i didn't get from my internet provider, he said just plug in and use but i have a problem with it. what i will do
I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file
I am currently using batch file for back up for domain server but one of the workstation is not in domain and has static ip , also it has username and password, Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder, Currently I am using below script for one of my domain machine.
I have two computers both running Win 7, one in the bedroom and one in the living room and Id like to view files from the bedroom computer in the living room. They are connected via TPlink powerline adapters so a wired connection for both
I can access the living room PC from the bedroom PC via control panel/Network no problem
but when I try accessing the bedroom PC from the living room, I get the error message login failure: unknown username or bad password
I have tried the following:
-creating a new user account for the bedroom PC, and logging in using that account and password
-changing the advanced sharing settings in network and sharing centre to match exactly
Also, I can access when I Turn off password protected sharing but I am not sure of the security of having this setting off so I really want password protected sharing on
This issue is happening on a Workstation PC with Windows 7 Pro 64-bit....the last software update before login crash was Trend Micro corporate Officescan if that helps at all.