I recently did a fresh install of Windows 7 Enterprise 64bit at work. I installed it behind a nat:ed machine (internal IP), so nothing special about that one. I chose home network as the network type as I would be using the computer at home from now on.
However to my surprise, when I got home the email had stopped working. Everything else is working just fine. The problem is with thunder-bird (or other email programs) and imap. If I try to check my new emails at home I just receive a message that connection to imap.xxx.xx.xx has timed out. This was working just fine when the computer was at work.
Home network is similar, broadband connection, connected to Buffalo WHR-G54S (NAT, DHCP). I've checked about everything and I have no clue what to do next. It doesn't matter if I turn the windows firewall completely off, I still get the same results (time out).
HOWEVER, I discovered a new thing. If I'm connected via VPN to my work network, I can check my email from home. Weird stuff, where the hell has windows stored something about my work connection here at home?
Canon Mx850 networked printer has been working fine on Win7 64 and WinXP. Today after printing several docs I suddenly cannot print from Win7. I can get to printer status page from IE9 with no trouble so that IP address is correct. I can scan from the device on Win7 using Twain. I can print fine from WinXP. When I print from Win7 the Print Queue shows print-error under status
I was on my laptop on Friday and the internet would connect when I turned on my laptop. So I just thought I needed to retype the security key. Nope. So after that I reboted my router. (Sorry for my horrible spelling). That didn't work either. So I came here and saw a number of people had the same problem. I tried every thing pluging my laptop into the router, netsh winsock reset, disable and enable the network.
Canon Mx850 networked printer has been working fine on Win7 64 and WinXP. Today after printing several docs I suddenly cannot print from Win7. I can get to printer status page from IE9 with no trouble so that IP address is correct. I can scan from the device on Win7 using Twain. I can print fine from WinXP.
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature: Problem Event Name:APPCRASH Application Name:Explorer.EXE Application Version:6.1.7600.16768 Application Timestamp:4d688122
Log On Screen - Change the changes are said to be successful according to the softwares, but when i tested by restarting or ctrl+alt+del, it doesnt work; the logon background is still the standard windows blue wallpaper. ive tried sfc scannow, everything went back to default(ive installed custom theme, custom start orb), tried again changing the logon background, still same result.
I'm currently doing an internship in an office, and we all use windows 7 enterprise.The management didn't give us the possibility to install any software, because we don't know the administrator password and we don't have installing privileges.We need some way to alert each other whenever a shared network file or folder has been changed, with a pop up message or a text log or an email...there's plenty of third party freeware software that does this, but we can't install anything Is there some way to do it with the built-in windows tools?
Wifi on my laptop suddenly stopped working. It has full bars but I cannot access any websites in any browser (Chrome/Firefox). I also cannot access itunes store. I keep seeing a yellow exclamation mark appear on my wifi signal then it vanishes by itself.
The USB's stopped working on my PC. I recently purchased it about a month ago and I think something was installed or was added to the computer because it stopped working all of a sudden.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: AMD Phenom(tm) II X4 955 Processor, AMD64 Family 16 Model 4 Stepping 3 Processor Count: 4 RAM: 7935 Mb Graphics Card: LogMeIn Mirror Driver, 7 Mb Hard Drives: C: Total - 1377472 MB, Free - 1149795 MB; D: Total - 13223 MB, Free - 1625 MB; M: Total - 39989 MB, Free - 39898 MB; Motherboard: FOXCONN, 2AB1 , 1.00, Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
For nearly half of the .exe files I attempt to open, I get this stupid "---.exe has stopped working" (where --- represents the name of the file). The files I'm trying to open are not video game files, but rather program files.I am currently working on a 64-bit system. I have only had this machine for 2.5 weeks.
I left my Dell laptop running a Sophos anti-rootkit scan overnight. This morning I found six extra windows open, which looked like this: [code] which looks like six randomly generated letters for the application name. I'm not sure if this is anything to do with the rootkit scan I was running, but I'm a bit concerned by it. Does anyone have any ideas about this? I'm running Windows 7 Prof 64.
So i start the game up fine, single player works fine for abit, then when i want to play multiplayer as soon as the game starts and i move it will send me back to desktop with the windows message 'GTA IV has stopped working'It has been fine past couple of months.
My specs if it helps define problems etc:
AMD FX-4100 3.6Ghz Windows 7 64bit 4GB RAM 1600 1GB HD 7770 OC
cd dvd rom just stopped working. I have ran all kinds of scans. no viruses. windows 7 laptop.. says device working properly but windows did not start related device driver.
installed logitech wireless k800 and trackball. upon installing logitech 'unifing' software (allows one USB dongle to control both devices) the numpad on my computer keybord stopped working. the k800 wireless keyboard is nonfunctional as well
fix a new Toshiba laptop which would not allow the installation of an HP PSC 1315 printer/scanner. After disabling all startups and services other than MS, succeeded in getting the drivers installed. Now I'm trying to clean the crap out of the computer, one of which is "Amazon Links". Will not uninstall from EITHER Programs and Features or Revo Uninstaller. Get the message that is the title of this post. 've seen many threads on the Web about this, but none that had a real answer. I would ordinarily try safe mode, but cannot find any folder with Amazon Links in it, so don't know where it is.
Yesterday my hyperlinks stopped working. So, for example, in Outlook where I can normally click a link within an email to go to the web page, I now can't (affecting all emails). I thought it might be an Outlook problem but today I notice there are other programs which should automatically go to a webpage which aren't functioning.I think I downloaded some dodgy software yesterday and uninstalled it, so almost certain that's what's caused the problem.I am using Win7, by the way.
I have built a new computer and have Windows 7 64 bit operating system. On every boot I get a pop up saying Reminder App has stopped working. Then it wants to know if I want to send a report.
When the system startup,I get an error message like "Rundll32.exe has stopped working"I cant use any browser, It throws an error like "chrome has stopped working" and error message like
Problem signature: Problem Event Name: BEX Application Name: chrome.exe Application Version: 22.0.1229.79 Application Timestamp: 50616671 Fault Module Name: StackHash_e290
I'm hoping fr soem input on a recent issue that I've started to encounter where Windows 7 'freezes' and my only option is a 'hard reset' via held power button and restart.This has only started happening in the last week or so, and seems to only (and nearly always) happen after I've shut down a game (one of several) running via Steam.The games themselves will work fine, but after I come back out to desktop/Steam then Windows will stop to respond after a couple of instructions. Ctrl-Alt-Delete will fail to bring up the Task Manager screen etc.
Recently my ampersand key just stopped working. It's only the ampersand, the #7 key underneath it and every other key works just fine, but not the ampersand. Using Windows 7 Ultimate.
It began when my company's network suddenly wouldn't recognize my user/password to access the folders on the server. My network admin tried to reset my password and even created a new user for me. Inexplicably a new problem arose. Clicking icons on the desktop or the start menu stopped working. I found that opening the file location and clicking the .exe did work.The problem remained when logging in as the local administrator.I found that the problem occurs on all .LNK files.System Restore to a month ago had no effect. Am I mistaken in believing that this proves that the problem isn't in the registry? I did a full disk virus check using the ESET a/v software on the computer as well as with MalwareBytes. No effect.
Recently I began having issues with my alt keys in games. I use a razer lycosa keyboard, as well as an n52te gamepad. Using a gamepad as my main source of imput during gameplay, the alt key is extremely useful as it allows me to have a whole additional set of keybinds with the limited amount of keys the gamepad has in comparison to the keyboard.A few weeks back I was gaming and noticed that if i was holding alt, and trying to use my movement keys (wsad is how I have the gamepad setup) the a, s, and d keys would not move my character on the gamepad or keyboard. If I just press a, s, or d on the gamepad or the keyboard without holding alt, they all work properly. Strangely, alt + W works fine and will move my character forward, and it seems to be only the a, s, and d keys being affected..My first thought was that maybe somehow i had bound something to Alt + a, s, or d ingame so i made sure nothing was bound to those keys. On a side note, the easiest way to do this generally besides checking through manually would be to just bind said keys, and then change that bind to something else. On the keybind screen in games, Alt + a, s, or d would have no effect, as if it hadnt been pressed, and would still be awaiting imput as to what key to bind.
I am running my games as administrator on a windows 7 x64 system, nothing running besides the game client. Multiple virus scans on the machine to make sure malware isnt the cause. Razer lycosa drivers installed and up to date from razer's website, same with the n52te, and i cant think of anything installed recently within the time that the problem suddenly started occurring.Although I initially noticed this problem appearing in games, it is also within windows itself. I guess theres a chance the gamepad/keyboard are going bad...but i had this problem occur a few months back and it seemed to magically fix itself, so i never had to persue it any further. Also the fact that they keys by themselves work properly on the keyboard and pad, including alt, but that when used in combination its as if theyre not even being pressed.
Both USB ports at my laptop (Toshiba Satellite C650, Windows 7 home premium, SP1, x64) stopped working after plugging in and unplugging several Garmin Forerunner 305 watches in a row. Everything looks all right in the device manage (no exclamations marks). I have reinstalled everything that has something to do with USB in the device manager, several times. Updated BIOS and used Windows update to get all the latest drivers and fixes.I have taken out the battery and let the computer "rest" for several hours without any power supply.I have tried to do some changes in registry key according to these instructions: USB ports suddenly stopped working in Windows 7 RC1 - Microsoft Answers (I managed to delete Lowerfilters).And of course I have tried with different USB-sticks, mouses, external hard drive etc. There is no power in the ports. When I plug in my Garmin Watch it does not charge.I installed and tried two registry cleaners (TweakNow RegCleaner 2011 and Glary utilities). After using them I got some hope back when I got a bit of reaction from one of the ports. A few times after plugging in something it started to install the driver but stopped immediately - telling me that the driver cannot be installed because the device is not plugged in (while it is).
I consider to do system restore to factory settings but before that I have to copy and save everything which is a bit complicated since non of the ports is working. If the restore to factory settings does not work, then I believe there is a problem with the hardware and I have to get the motherboard replaced.
got a tosh c650 laptop and just tried putting a cruser blade 16gb stick into one of its 2 usb ports.Now both ports dont do anything .Tried deleting all drivere and re installing (inc safe mode) but no joy...Have I damaged the MB?
well long story short i have been getting an annoying pop up saying taskmanager has stopped working for the last couple days , i have been unable to restore to a previous point and windows refuses to repair using the disk i installed with
I use a Toshiba laptop and I used to watch movies on it all the time until it stopped working. The drive shows there is no disc when there is a disc in there, the same disc I used before with no problems. I have ONE movie that will play and all the others wont work? I had a virus removed in your malware removal forum and they tried to help me with the dvd player but the end result was referring me to this forum
I am in a spot of bother since I have to give an important presentation and all of a sudden my USB ports (3) in HP pavillion dv6(running windows 7 64 bit) stopped working. I plugged my friend's ipod touch to charge from the computer and it did not work and after that none of the ports will work. I tried reinstalling the drivers,restarted the computer multiple times and even ran a virus scan but its of no use.Out of the 3 ports only one says "windows detected a problem with the device", the other 2 wont even say anything. I even checked at the registry keys to see if the USB ports are enabled and they were fine. My warranty expired this December so now I have to pay HP for any trouble shooting
when i wanted to play games there's "X has stopped working", it occured when in the middle of the game or when the game launch.It was also occured with my Chrome, Modem, and even my anti virus. I've tried to config the DEP but, it's still not working. And for the games, i'm sure i have the minimum requirements
